internet access - I always get 'pending on the cache' when you try to access the Internet

Similar Questions

• Always get a sign on screen when you try to play the video from Netflix in Windows Media Center

  When I try to play a video on netflix by MediaCenter, he shoots me a sign on the screen and then usually I want to type anything on the subject.  I already have my information saved, but this still happens and I can't watch anything on the MediaCenter.  Anyone know why this is happening?

  Hello

  I suggest you follow the link control.

  I also suggest you to contact Netflix support to get help on the issue.

  Limits of support for Netflix in Windows Vista Media Center

  http://support.Microsoft.com/kb/972151

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  Hello

  If please close the process below for task/monitor activity Manager and try again.

  

  Hope that helps!

  Kind regards

  Sheena

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

  I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

  Hello

  Reference:--

  Open the Temp folder.

  Clear the contents of the Temp folder.

  Disable your Antivirus and firewall computer for awhile.

  Launch Desktop CC and try to download Apps.

  You can also consult the document below.

  Error downloading creative cloud applications

  Hope this helps!

• I get an erroe OX643 code when you try to update net framework 3.5 service Pack 1

  I bought dragon naturally speaking premium 11.5 version when you try to install the software, it is significant that I need to update net framework net framework 3.5 service pack 1. I always get the error message about the failure of the update. I get the error code is OX643. I tried to install the framework net 2.0 also and get an erroe OX80131107. The computer is a hp pavilion media center windows xp service pack 3. The computer meets all the requirments for the dragon software to use, but I can not install. This computer is used just to the House and not for businesses. I don't know why there even any net framework in it. I bought the computer new in 2005

  Hello

  You can try the steps in the link below to fix the problem.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

• Get error 0 x 80070003 when you try to run Fix - It.

  Fix, that it does not start and I get error 0 x 80070003. XP SP3 and Windows Security Essentials running.

  Hi Ted,

  Exactly what Fix - it by train are you running and what's - the site would help (or you're talking about the downloaded version)?  Why are you trying to run Fix - it - what is the underlying problem , not to mention that the problem with Fix - it?  If this problem has an error message, please report exactly Word for word including all codes.  Please do the same for the error message above as well.

  Although designed to update problems, maybe will help the following articles of this error code: http://support.microsoft.com/kb/956705 and http://support.microsoft.com/kb/910336.

  See also: error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.microsoft.com/kb/916248.

  The following were also suggested to: http://www.vistaheads.com/forums/microsoft-public-windowsupdate/437368-updating-kb892130-error-0x80070003.html (although again, not for the reason you mentioned, but it may work as she is bound).

  1. stop the service automatic updates, clear the contents of the data store
  Download the files and restart the automatic updates service.
  Stop the automatic updates Service.
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click on stop.
  Click OK.

  2 remove the contents of the DataStore and Download files.
  Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
  Click OK.
  Delete the content of the files, the data store and download (but) NOT the files themselves

  3. start the Service automatic updates
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click Start.
  Click OK.

  I hope this helps.

  Good luck!

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• I get a failure 0x8000FFFF catastrophic when you try to do a backup, even with a new drive. Suggestions?

  I made several attempts to make my back upward, using the back to the top and Food Center. I thought the problem was the drive, so I was using brand new in packaging. The diskette formatting program, but then at some point, I get a failure 0x8000FFFF catastrophic. Any suggestions out there?

  Hello

  Did you change your computer before this problem?

  Follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".

  http://support.Microsoft.com/kb/973558

  Note: You may lose small amounts of data when Windows tries to repair bad sectors on your hard drive.

  Method 2

  Check if the backup-related services are running.

  (a) click on start.

  (b) in the search box, type services.msc

  (c) right click on Volume Shadow Copy and go to the Properties.

  (d) select Automatic from the Startup type drop down.

  (e) click on start.

  (f) repeat the steps for service Windows backup.

  (g)   to restart your computer. Note: make sure that the services of dependencies for Windows and Volume snapshot backup are also started.

  Method 3

  Check to see if the problem exists in a clean boot state. How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• I get an error COOD11B1 code when you try to play a video clip. __

  I get a COOD11B error code when I try to play a video clip.

  Hi Pat dubois,

  1. what type of video file that you are trying to play?

  If you receive error C00D11B1 code,

  Cause one. It may be a problem with the components of security of your digital media player to play the files on your computer

  Follow the instructions in the article given below, because it can help you solve the problem

  Windows Media Player C00D11B1: http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  Go to http://drmlicense.One.Microsoft.com/Indivsite/en/indivit.asp , then you will need to get the update. You need to download this patch to remove the error code and everything works again.

  Also take ownership of the files you are trying to play by right clicking on the file and taking possession.

  B cause. If you are probably trying to play a file that uses a codec that is not on your computer. I suggest you to download and install the latest pack of codecs for Windows Media Player 12 on your computer. Search using your search engine preferred for the third-party codec packs.

  Codecs, frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Cannot activate Windows Vista get an error 0xC004E003 error when you try to activate

  OP: Activation of Vista

  Error 0xC004E003 when you try to activate Vista.  I had the laptop for over a year and yesterday I received a pop up when I logged my product key is invalid for activation.

  Hello labchris,

  I suggest you follow the link below and try the steps listed in the article for this problem:

  Error message when you try to activate a copy of Windows Vista: "the Software Licensing Service reported that license evaluation failed: 0xC004E003".

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Access to the Internet and get a "atl100.dll" error when you try to use Firefox

  I just reinstalled Vista Home Premium and everything was going well for two days, but I can not access the internet regardless of the browser that I use and when I open Firefox, I got an error of "atl100.dll", I am afraid that my files cd, especially the .dll files can be altered, where can I find a good (and costs nothing) copy of the file atl100.dll? Please help as soon as possible. Thank you!!

  Original title: Re-installed Vista Home Premium and cannot access the internet & get a "atl100.dll" error when trying to use Firefox and IE just is not access to the internet either

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message?

  3. who is the antivirus installed on the computer program?

  4 are you using wired or Wi - Fi to access the Internet?

  5. What is the version of Internet Explorer installed on the computer?

  The possible causes:

  • ATL100.dll file is missing, as it was accidentally deleted from your computer
  • ATL100.dll file is damaged by viruses and your computer cannot access the file.
  • ATL100.dll associated with registry files is corrupt and obsolete.

  Perform the steps:

  Method 1: Perform a SFC scan on your computer to fix the corrupt dll files.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2: Reset of internet explore and check. (If you use Internet Explorer)

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the links:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Why do I get VISA code error-1073807202 when you try to connect the PXI-2565?

  I got the 1703807202 error code (a code library required by VISA is not found) every time when I start the computer and used 'Initialize with topology' first connect my channels.  This error could disappear if I start MAX and open devices and interfaces, then re - perform the same task.  How can I get rid of the error?  Thank you.

  My bad, GPIB driver has not been installed

• Get serious error pop up when you try to uninstall a program...

  I need help here. I did something really stupid recently and I see it now. I installed a program on my laptop without even checking if it is compatible with windows vista. It installed fine, but now when I try to uninstall it, I get a message that says "Image transfer can not be installed in the current version of windows".  So now I don't know how to get this program off my laptop. The error message says that it can not be installed, but it is already installed, so I'm confused about what to do next...? If anyone can help me I would really appreciate it!

  Hello

  You didn't say what was the program?

  1. make a Restore Point.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. use Revo Uninstaller to remove the program

  Revo Uninstaller - Free Version
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  3. If necessary to re - install the program (no matter if it is running), then use Revo to remove it.

  4. make sure to reboot after its withdrawal.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.