Internet access via Wlan - laptop A660 Sateliite network card problems-

Hello

My Satellite A660 will not access to the home network to connect to internet, repair program says it cannot fix this problem of connectivity. Other my own network I can connect without problems.
Latest Broadcom drivers are installed.

No idea if the problem is with the router?

Have you tried to use the WLAN by friends?
Have you checked all the WLAN settings?

Wireless network adapter must be enabled
Standard WLAN must be correctly defined

Your WLAN is visible for your laptop satellite?

Tags: Toshiba

Similar Questions

  • Satellite C660 - no internet access via WLAN when powered by the battery.

    Hi guys,.

    Just bought a Toshiba Satellite C660 and went through the installation process and everything seemed simple and easy. However, this changed when I tried to use the laptop wireless. As long as I fed it with the AC adapter, all right. When I remove the adapter I lose the internet connection for about 3-5 minutes before it reconnects for about 1 min. Then, he constantly repeats the cycle.

    I have a strong signal that shows as "Connected" to my wireless network in the network and sharing Center, but get the message "no internet access. I have another laptop and PS3 connected to my network wireless without any problem. I disabled them both where they do not interfere with the signal, but that made no difference. Therefore, I am sure that's not the router, the modem, or the wireless signal.

    I checked to see if my WLAN adapter needs an update to the driver, but it shows that I have already installed the latest drivers. I tried to change the power settings for the adapter wireless of "Maximum Performance" all this without success.

    In addition, it works fine on battery if plugged directly on the wireless router.

    Can anyone offer advice on how to fix it, before I return it to the store?

    Thank you

    Jason

    Please take a look in this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59879

    There is a similar discussion on this theme.
    So to change the power management settings and the installation of the new driver Wlan has solved this problem.

  • No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

    I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

    Deactivation and reactivation of these two connections: FAIL.

    "Diagnose and repair" on the two connections: FAIL.

    Under dynamic I.P. type to static/static to the dynamic: FAIL.

    Uninstalled all network via Device Manager devices, then restart: FAIL.

    Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

    The command ipconfig/all text follows:

    ----------------------------------------------
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.

    C:\Users\Brooklyn's>ipconfig/all

    Windows IP configuration

    Name of the host...: Brooklyns-PC
    Primary Dns suffix...:
    Node... type: broadcast
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Intel (r) Wireless WiFi Link 4965AGN
    Physical address.... : 00-21-5C-31-87-95
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :
    Description...: Realtek RTL8102E Family PCI - E Fast Ethern
    and NIC (NDIS 6.0)
    Physical address.... : 00-1E-33-4E-2E-F7
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Card tunnel Local Area Connection * 6:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
    B4B}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
    0FA}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Brooklyn's >
    --------------------------------------------------

    Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

    I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

  • Connected but no internet access (E1200 with laptop Acer Win 7 x 64)

    Whenever I come back from a stay in a motel, there are problems to be connected again to the House.  This time, I show that connected to the network wireless 2, but no. Internet access connection.  Yesterday, I figured it out and got things, but today it happened again and I don't get it.  See network properties properly, including appropriate security key.  When I ran Win 7 Network Diagnostics, he returned that I didn't have a valid IP address.  I have reset the router and even unplugged for a minute.  All this time, the ' currently logged on: "network in the sys bar icon showed the Summit he was trying to connect my network name to the internet (downstairs, the network showed as connected, probably by a router).  Another thing I did was to support IP services and disable and stop, then after restart it a few minutes.  Nothing.

    But wait!  As I finished typing the last sentence, about an hour after I started the laptop, the first time, I opened center network & sharing once more and suddenly between the name of my computer and the Internet has shown the name of the network, instead of "no internet access."

    So, what could be going on here?  (1) why should he take 50 minutes to make the connection?  (2) why do I have problems every time after the use of wireless network from a motel?  Thank you

    Update: resolved for now.  I started using the safe mode with networking, which required the implementation of msconfig as F8 does not work.  Which required a repair of the system, and then restore it, and finally I was able to follow the instructions at http://forums.techguy.org/networking/950031-cant-get-valid-ip-address.html.  Solved.

  • VPN works well but domestic internet access via router

    Hello

    I am connected to my Office VPN (Cisco Client) and I am able to access all brach office servers and network devices using their IP addresses internal.

    I can also access the internet.

    But when I do a tracert for office servers it is routed via office network. But when I tracrt to the internet via my router domestic routing. ??

    Isn't it supposed to go through my business network.

    Any help would be great. Thank you

    It's called a VPN split tunnel.  They channel the resources of the company by the VPN and let your internet go out via your local internet connection. Some companies divide tunnel and a few all traffic, including internet (complete tunnel).

    There is nothing you can do. This is how your system admins have set up.

  • Client VPN prevents internet access from other computers on the network

    Hello.

    I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

    On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

    Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

    Thank you

    H. Adams

    Hello

    Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

    Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

    Vikas

  • Unable to connect to the Internet error "Windows does not detect a network card installed properly"

    Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

    Any help is appreciated

    OT: Internet connection

    Hello

    You did changes to the computer before the show?

    I suggest you try the steps from the following link:

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • G62-233NR wireless network card problems

    Okay, so I tried to do a little research, but I'm not sure I found my problem or a solution.  I have laptop HP G62-233NR and it worked fine up until tonight.  He won't have a wired or wireless connection to the internet.  The troubleshooting tool Windows says there is a problem with my adapter wireless and wired.  I have the Realtek RTL819SE 802.11b/g/n WiFi Adapter and under my connection to the local network, it says the Realtek PCIe FE Family Controller.  Now, I tried to download the latest drivers on my desktop and install via USB key, but even after that I have do always run into the same problem.  So I have two questions, is any way to fix this and if it requires one or more network cards new that it would be better that I can get which is compatible with my laptop?  Thanks in advance!

    Hello

    I doubt the two cards that jump on you at the same time, but who knows...

    You can install one of the cards in your maintenance manual with the part number of HP wireless. The wired adapter is part of the motherboard and cannot be replaced individually.

    While I don't have a definitive answer for you, I suspect some sort of software problem.

    It may be worth it to you to back up your files and perform a system recovery and see if that solves the problem before the purchase of new equipment.

    Paul

  • Satellite A300-2 TB-Ethernet network card problem

    Hi all

    I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

    If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

    A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

    Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

    I've updated the network ethernet card driver, nothing changes.

    In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

    Y at - it suggestions to solve this problem?

    Thank you.

    Hi alp37,

    I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

  • Wireless network card problem code 13

    I had trouble with my network using wireless for the past weeks. When I went to see what was wrong with my wireless adapter, it was no problem, but the 6to4 card and adapters itap had an error 13 code. I tried uninstalling and reinstalling, but my wireless still doesn't work.

    http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

    Read the above on 6 to 4 adapter problems.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    ·                        ISATAP adapter:

    ·

    ·                        http://support.Microsoft.com/kb/932520

    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

    Windows cannot load driver (Code 31)

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    For wireless problems:

    Check that the wireless switch, if there is one in the laptop is turned on;

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • Network card problem Code 31 on Tower Dell Vista

    Hello

    I have a Dell running Vista OS base tour

    In the Device Manager both wireless and cable port broadcom usb are yellow exclamation Code 31.  The proper drivers are installed, and I even bought a different usb wireless brand companies and who show the same thing.

    On startup, I get the message "Windows has encountered a problem installing the software driver for your device.

    So I have no internet access

    When I run the Broadcom driver installation software it runs and then gives me "The wizard was interrupted before the Broadcom 440 x 10/100 integrated Controller could be completely installed"

    When you load them manually drivers for the USB wireless system can't find the sticks that work.  Work in the same ports Usb flash drives so I know this is not a usb problem.

    I have haved tried in high cmd prompt netsh winsock reset catalog and reset netsh int ip ipreset.txt

    Since I can't send them, here are the 3 (1 for the broadcom), 1 for the linksys USB and 1 for the Netgear USB reports "problem reports and solution."

    Description
    Windows has encountered a problem during the installation of the device for your Broadcom 440 x 10/100 integrated controller drivers

    Signature of the problem
    Problem event name: PnPDriverInstallError
    Architecture: x 86
    Win32 error: 0000001F
    The INF name: b44win.inf
    Driver Package hash: a4ff09c646cf97a72e7241c9a8d160636a21e4f9
    DDInstall section name: BCM4401_B0_DEXP
    OS version: 6.0.6002.2.2.0.768.2
    Locale ID: 1033

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: USB\VID_0846 & PID_9011 & REV_0001
    Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
    PnP problem code: 0000001F
    Driver name: bcmwlhigh6.sys
    Driver version: 5.10.79.30
    Driver date: 05/05/2009
    OS version: 6.0.6002.2.2.0.768.2
    Locale ID: 1033

    Description
    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.

    Signature of the problem
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: USB\VID_13B1 & PID_0026 & REV_0006
    Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
    PnP problem code: 0000001F
    Driver name: usb8023.sys
    Driver version: 6.0.6001.18000
    Driver date: 01/19/2008
    OS version: 6.0.6001.2.1.0.768.2
    Locale ID: 1033

    Thanks for any help you can offer

    Hi Pogaria,

    You can try to perform the clean boot and check if you can try to download and install the network drivers.

    Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and help to eliminate software conflicts.

    The following link has steps showing how to perform the clean boot:http://support.microsoft.com/kb/929135

    After completing the clean boot trying to install the network drivers.

    Note: After you have installed all the drivers, please to ensure that the computer is configured to start as usual according to step 7 of the above article:

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Pavilion TS 11 portable WIFI & network card problems!

    Hello!

    I bought again notebook Pavilion TS 11 with 8 64-bit windows. His new cell phone. WiFi card and network works fine, after that 1 windows update my wireless connection and interent closing. I try to use every single driver on the hp website - nothing works.

    After I configure a new installation of windows 8 since the recovery partition, internet and wifi only ' works from the beginning.

    This is my windows report screen 8 [PL]: http://imageshack.com/a/img856/522/qe4t.png

    He said: do not work driver for network card and wifi.

    Can someone help me out here?

    It's interesting.

    Wifi connection in the systray icon, as seen usually indicates that there is a wifi connection. Click on it to see if it shows a connection.  Is the wifi led lit and white instead of amber?  Can you put a picture of the device manager that shows the wireless network card?

    An option would be to connect the CAT5 cable to your router or modem, and then use the HP Support Assistant.  Click on the HP icon in the toolbar start the HP Support Assistant. Take a look at the section updates and optimizations. You can click on it to find the driver ojnthe HP Server support as long as you have an internet connection.

  • Network card problem

    Hello

    I have a MacPro mid 2010, 2x2.66 GHz 6 core, 32 GB memory DDR3, nVidia GeForce GTX 760, disk SSD PCIE.

    It seems that I have the problem with the network card. At first, I noticed that control avid artist (a control unit for the music studios) lost connection randomly.

    After months of trying to figure out why this happened, Avid were certain that there was something wrong with my NIC card on my mac pro. It seems they are right, because I tested and I also noticed that when I am connected to a VPN, the VPN connection fell back randomly.

    I'm not sure if it's a hardware problem or not. I reinstalled it in OS X format from scratch. problem remains.

    Any ideas...?

    Thank you

    Alex

    After you have reinstalled the OS X from scratch we can assume that it is indeed a hardware problem initially. Then there are things to try-

    • Try the other network on the Mac Pro (he has two)
    • Try a different network cable
    • Try a different network Jack

    If not, help above, then it may be the chip rather than the plug or cable, whereby cases that the chip is soldered to the logic board, you will need to seek a different network card. This could be a USB one or a PCIe one. See below for examples.

    http://www.Apple.com/uk/shop/product/MC704ZM/A/Apple-USB-Ethernet-adapter

    http://www.KANEX.com/usb3lan

    http://www.sonnettech.com/product/prestogigpciepro.html

    http://www.sonnettech.com/product/prestogigpcieserver.html

  • Lenovo sl500 network card problem

    Hi guys

    My lenovo sl500 network card does not work when it is connected with the AC adapter (power cord). When I run on battery... This works perfectly... I use the latest version of the driver realtec... anyone has an idea please?

    Thanks for your help...

    Thanks for your efforts... ssend it to the service center... lets see what happens...

  • Please help wifi does not not ACER aspire 4710g (wireless network card problem)

    Please help me

    C:\Users\ali>ipconfig/all

    Windows IP configuration

    Name of the host...:-PC

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    Wireless Network Connection 3 Wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt #.

    2

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :

    ... Description: Network adapter on Broadcom 802.11 g

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 318775098

    DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Broadcom NetLink (TM) gigabit Ethernet

    Physical address.... : 00-1D-72-1B-B7-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 11:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Anchorfree VPN #2 HSS

    Physical address.... : 00-FF-03-C6-CD-54

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Card Anchorfree VPN HSS

    Physical address.... : 00-FF-EF-4A-57-34

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    C:\Users\ali >

    AWI

    There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

    I would start by removing the current driver of sifi and install the latest driver available.

    The IP address for the above connection is

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

Maybe you are looking for