Internet and the printer works do not after windows update

Similar Questions

• Pavilion 6543tx: keyboard and the touchpad works do not after windows 7

  Hello.. I have upgraded to windows 10 days back. But as the cursor froze a lot, I switched to windows 7 today. Now the situation is worse. The touchpad or the keyboard does not work. I tried to connect the keyboard and mouse external, but also those who did not. I am able to connect to windows through fingerpass, but unable to do anything. Please help as soon as POSSIBLE. Thank you!

  HI @Milind_Thakur,

  Thank you for your inquiry.

  I understand that you upgraded to Windows 10, but due to a problem with the cursor freezing frequently, you returned back to Windows 7. Now the touchpad or keyboard to respond. Connect a keyboard and an external mouse also did not work. You are able to log into Windows with your fingerprint, but are still unable to access anything whatsoever.

  I'll try to make a recovery to factory.   Computers HP - performing a recovery of HP (Windows 7) system. If you can not access the Recovery Manager, you will need a recovery media.  If you have not created your recovery discs, please contact HP support to obtain a recovery kit. Please contact HP to Contact HP Supportassistance. If SD not do you a backup before this all started, you will have an option during the recovery to do.  If you need it, here is a link to the computers HP - restore files that have been supported to the top using HP Recovery Manager (Windows 7).

  Please let me know the results.

  Thanks if it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' for my effort help, click on the "Twww.Mountainview.rsb.qc.ca Up" " " give me a Kudos.: catvery-happy. "

• WIFI connection works do not after Windows Update installation

  Original title: update windows

  My daughter who has just an update running on Windows 8. He wrecked his WiFi connection/settings. His internet now works on the wired only. Is it safe run a system restore?

  Paul,

  Tip: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or updated IE & restart.  If that does not resolve the problem, then try System Restore.

  Restore to before the update was installed check Windows updates and hide the update so it would not automatically reinstall and the program works.

  The time and date of this moment in Washington, United States of America is 16:14

  Tuesday, October 29, 2013
  The time Pacific daylight time (PDT)-0700 UTC

  UTC/GMT is 23:14 Tuesday, October 29, 2013

  Current weather conditions in Seattle

  Just55 ° F / 13 ° C

• I have a problem with the printer works is not on Windows 8.

  Original title: device

  my printer has stop working.  Convenience store tells me that the coils do not work.  How can I solve them?

  I suggest you to uninstall the printer and install the latest printer driver for the printer model you are using.

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Press Windows key + R
     Type: services.msc
     Press enter on your keyboard

  3. Right click on the print spooler service, and then click Properties.

  4. On the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Skype works do not after Windows update Setup

  Original title: you broke all my messengers with DEP.

  That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
  I thought about this once, of course, I'll do the update and now my Skype will not work.
  I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
  How to operate? It is extremely important that I make it work again soon.

  -Edit-
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  Original title: you broke all my messengers with DEP.

  That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
  I thought about this once, of course, I'll do the update and now my Skype will not work.
  I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
  How to operate? It is extremely important that I make it work again soon.

  -Edit-
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  Don't blame Windows updates.
  For all the world claiming fault from Windows updates, there are at least 2 who have had no problems with it.

  It's your computer. Somewhere, the parameters are wrong.

  As to...
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  When you run the cmd, command prompt, you're supposed to do right click on cmd > click on Run As Administrator > then enter the command in cmd.
  They call this elevated command prompt.

  Did you do that?

• HP LaserJet M127fn MFP pro: printer works is not after a few days

  Hello I have a printer model: HP LaserJet MFP M127fn pro

  I installed the software and drivers and the printer works perfectly well for a few days and then stops working. I have then uninstall and reinstall the drivers working yet and only a few more days...

  Someone please guide what to do...

  Thank you

  Hi!, guy36:

  Please see... http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Introduction

  Step 1

  Step 2

  Step 3

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Installation of updates on Vista now the printer works do not error USB001

  I have installed new drivers for vista now my Canon pixma ip4000 not work, I have updated the new driver and tried to install the drivers for Canon still nothing...

  can someone help please

  Hi Aarinder,

  Try reinstalling the drivers in the State of clean boot from the link provided below and check if the problem is resolved.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip4000#DriversAndSoftware

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: If the above condition step does not resolve the problem, try to perform a system restore to restore the work correctly, settings, to do this follow the instructions below:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.

  Reference:

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Step 3:

  To find out what particular update triggered the mouse problem, disable automatic updates.

  Instead, install a patch at a time.

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  2. in the left pane, click on change settings.
  3. Select "check for updates but let me choose whether to download and install them.
  4. click on OK.

  From the list of updates, check an update at the same time to download and install. Note the number of the KB article so that we know with certainty what update causes the problem. Post back with the KB article number so that we can take a call on the same.
   
  Recommended links for windows update:
   
  Activate the update or disable automatic
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off
   
  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Keyboard and mouse not working do not after Windows 7 installation

  Windows 7 has recently been installed on my Dell computer and now won't work neither the keyboard nor the mouse. I tried all the USB ports available without result. I have an old MacBook and the mouse works on that so I know that's not the mouse. I can't begin to solve the problem if I can't use the computer. I read the instructions on how to use a computer without a keyboard or mouse but they all say "Click on Start" How can I click if I have no keyboard or mouse? Help, please. I need my computer to the wrong House and right now it is totally useless.

  Hello Suzanne,.

  I would like to know some information about the problem so that we can help you better.

  1. have you tried to use another keyboard with Windows?
  2. What is the model number of your Dell computer?

  Thank you for details on the issue.

  I also realize the inconvenience that you are experiencing the problem of keyboard and mouse. I will definitely help you.

  Problems of mouse and keyboard can occur for the following reasons:

  -Cables are not connected properly.
  -Incorrect device settings.
  -Missing updates.
  -Corrupt or incompatible drivers.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Epson Stylus nx230 printer works is not in Windows 7.

  Original title: printer

  I have an epson stylus nx230 I have instlled software readers and used I have the computer on the USB plug are connected and always my computer will not print when I go to print it says ready status but whn I hit the print button I get noting and the status indicates the error. I have troubleshooted and tried as far as I know someone else can help, at first it says printer not detected that sometimes it is said there are jobs printing stops printer when I cancel all print jobs, it says ready but as soon as I hit the button print my printr does not print and I get the error...

  my email is * address email is removed from the privacy *

  Hi Donna,.

  Let us work together to get the printer works.

  I would like you to answer a few questions, so that we can properly diagnose the problem:

  1. what is the accurate and complete error message that you receive?

  2 is the question which occur during the printing of Web pages or recorded pages?

  3 what troubleshooting measures have you tried?

  4 have you made changes on the computer before this problem?

  Let us try these methods:

  Method 1: Open the printer troubleshooter.

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Correct printer problems.

  The following link contains fixes for common printer problems in Windows 7, including print errors, print spooler errors, and other issues that could prevent you from printing.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please let us know the status of the issue.

  Note: Please don't post any personal information, such as e-mail addresses, telephone numbers, product key, etc. in this forum, because it can be used for the wrong purposes.

• HP Photosmart C5280 All in One printer works is not after the installation of updates

  OP: Problems with my HP Pavilion connect with my HP Photosmart C5280 All in one. Allows to work properly and after running the update something happened.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello iwasbetterbutgotoverit,

  1. do you have an update of the hardware installed on your computer?

  2. what exactly happens when you try to print from the printer?

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This automatically diagnose and fix printing problems, installation of a printer, connecting to a network printer and other related errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  As it was working fine before installing the update, I suggest that you do a system restore on your computer.
  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can visit the link to the KB Article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can use the System Restore tool to undo the system restore if it does not help.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse and the keyboard doesn't work do not after Windows 7 update

  I have Windows 7 Home Edition.  My CPU is the last Windows Update during the night, now the keyboard and the mouse do not work.  I rebooted and unplugged both several times.  I go back to my login screen, but I can't do anything from there.

  I prsume your keyboard is USB?  If you can find a friend who has an older keyboard with a PS/2 connector, you can try this, F8 again and select last last known good configuration.

  There is no updates yesterday in itself, because I have them on my PC (I hate the 2nd Tuesday of the month because I run around the House like a crazy woman by ensuring that 1 Vista 64-bit, 2 Server 2008 R2 64-bit, 2 Windows 7 32 bit and Windows 7 64 bit 4 are all downloading correctly and restart if necessary.) All keyboards and mice are works well here.

• System Restore with the keyboard and the mouse works do not and do not know admin password

  I recently decided to update my drivers on my 9 year old bridge. Apparently the program that I used to do didn't realize a bad driver when he sees... Sort of my keyboard and mouse not responding while windows was loaded. They work enough for me to access the bios, enter the menu start and also when I hit enter to boot from a windows cd.
  I'm trying to access my restore points to get rid of the driver that has been installed. Unfortunately when I put the windows CD and try the repair option I can't log on to the volume because it requires an administrator password. I tried Admin admin admin admin and leave blank. I even ran a program to reset passwords (I do not use any which way.) still cannot log on to the volume. I also tried to pass in front of the screen to repair and installation of windows to fix this. I can hit escape and pgup and pgdown but not f8 to agree to the agreement.
  When I boot in safe mode with command prompt that it still forces me to click on an account to connect. Which I can't because the keyboard and the mouse do not work when windows is loaded.
  I can't get to the command prompt to display the box to help restore points?

  Hello

  ·         Did you do changes on the computer before the show?

  I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

   

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Regarding the password administrator there are chances that you must have defined and now you don't remember or if the bridge keep some default password. You can also contact the Support Technology Gateway for help on the issue.

  Technical support Gateway

  http://support.gateway.com/us/en/support/default.aspx

  Hope this information helps.

• Troubleshooting hp printer all in one series. full cartridge and the printer works but no ink on the page

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Try to re - align the cartridge:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=buu00657&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=441115

  Reset the print queue as you 'jobs' stacked:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&LC=en&DLC=en&cc=us&product=441115