Internet and the sound does not work after uninstalling programs, System Restore also not work.

Similar Questions

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• EVGA Nvidia Geforce 8400 GS issues: [FIXED] screen and the sound does not [FIXED] virgins

  I have a HP Compaq dc5750 I just got an EVGA Nvidia Geforce 8400 GS, and I'm having a problem with it. I disassembled the computer cover and installed, replace the cover, turned on the computer and the monitor not power not on. So I decided that I had to disable the integrated graphics card (ATI Radeon Xpress 1150), then I added the card even once. Still happens... Monitor powers on without the new graphics card. My monitor is 8 years old and lacks a DVI port. I have to connect the monitor to the graphics card to make it work? I want just this card to work.

  UPDATE: white screen problem is fixed, but the sound does not (no audio installed device) even if the audio driver is installed

  Hello

  This kind of question is mainly caused by the sound card driver is not not compatible.  Contact the hardware manufacturer directly to confirm the driver is compatible or not.

  Test the issue with another pair of speakers or headphones, or you can plug the device of reading to another port to see the result.

  In the meantime, you can also see if the playback device is disabled. To do this, please check the following steps:

  1 Please, click Start-> Control Panel-> Sound.

  2. on the playback tab, right-click on the empty square and then click on "show disabled devices".

  3. check if your playback device is disabled. If so, right-click on it and click Activate.

  1. Please click Start, type services.msc and press ENTER.

  2. double-click on Windows Audio.

  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Stop" under "Status of Service" to stop the service.

  4. click on "Start" under "Status of Service" to start the service.

  Reinstall the audio device

  1. click on start, type Device Manager, click on Device Manager to open it.

  2. expand ' audio, video and game controllers ".

  3. right click on your audio device, and then click on uninstall.

  4. check "delete the driver for this device".

  5. click on OK.

  6. after that, restart the computer, the device and the driver must be reinstalled automatically.

  Please check if the problem can be solved now.

  If the problem persists, please install the latest driver of sound card on the manufacturer.

  I found the problem... once again: I had to go to the BIOS and enable Audio integrated. My audio integrated uses Realtek High Definition Audio instead of Nvidia High Definition Audio.

• After upgrading Windows Vista to Windows 7, DVD player and the sound does not work on Hp Pavilion 6807us laptop.

  Original title: multimedia player Super Multi 8 X DVD±R/RW with Support Double layer on my computer is hp Pavilion 6807us laptop detects not.

  I have a multimedia Super Multi 8 X DVD±R/RW drive with Double-Layer drive that is not detected on my computer hp Pavilion 6807us laptop. The same day as my sound stopped working. My OS is windows 7 but was Vista when the problem started. Can someone help me? Buy the way, my sound and my cd/dvd device does not appear in Device Manager. My Dvd Player is displayed in order to start installation. Help please.

  HP doesn't produce the specific drivers for this model, only drivers Vista, win7, and as such it may not work properly.

  If the problem occurred previously under Vista must have been resolved then, as the upgrade, an o/s is unlikely treat a pre-existing

• I can't read the words of the security and the sound does not work. How can I complete the configuration of the synchronization?

  How anyone can read the enigmatic words for synchronization of the configuration is beyond me. Just audio does not work. If not, how can I transfer my cache settings, including passwords for sites in my new computer?

  Hello

  You can try after some time. To check possible synchronization problems, please see this.

  Alternatively, you can manually transfer the necessary personal data.

• Recovery of the Internet and the Touchpad does not

  Hi all!

  I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

  Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

  The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

  Thanks to anyone who responds!

  Start up your Mac in Mode without failure.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  
  

  Then start while pressing the command + R keys to access internet recovery to restore the OS X.

  Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

  to reformat and restore the OS X.

  On Safe Mode

• Satellite L30: The sound does not work on XP Sp2

  Hi, sorry but I cannot well English.

  I have a problem. I do not have CD with drivers, but I download from the toshiba site.

  Yesterday, I reinstal windows, then I install all the drivers and I have a problem with the audio drivers.
  In Device Manager is all good, his system is activated, drivers of instalation, I have no problem. But sound does not work.

  You have any ideas?

  Hello

  If the sound does not appear on your laptop, you must first check the volume control on the side of the laptop. Turn it up to the max level.
  Then check the sound devices and audio in the control panel if any controller is disabled or turned to the lower floor.

  Additional connect headphones and check if you can hear something.

  By the way: have you installed the correct drivers? On the Toshiba page, you will find two different sets of portable Satellite L30

• I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

  Hello

  1. what operating system is installed on the computer?
  2. what web browser are you using to play the games online?
  3. don't you make changes to the computer before the show?

  If you use Internet Explorer, then I suggest you to try the steps from the following link:

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246
  
  Additional information:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

  Troubleshoot display with Microsoft games
  http://support.Microsoft.com/kb/263039

• The sound does not work on my XP system

  Hi the sound does not work on my Windows XP Pro system, while they were inspecting it stipulates that at least one of the following services does not work, Windows Audio and Windows Audio Endpoint Builder. How can I solve this problem?
  Thank you

  Hi GeraldSaurin,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  I suggest you to start the following services and check that it works.

  a. click on Start menu and enter service.msc and press enter.

  b. in the next window you will see the list of services.

  (c) in the list, locate the service and try to Start the services.

  Also run the fixit available in the link below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  I hope this information helps!

• Sound and the video does not.

  I just bought the new Windows 8, but the sound does NOT work! The audio and video such as youtube has ton of lag and does not work. I did what a technical support technician said to do. the convenience store did not work no matter what and I uninstall and re-install the drivers. What else might work? If this isn't the case, I would have my money. Thank you

  Hi TrevorAdams,

  Welcome to the Microsoft Community, the best place for all your windows related queries.

  Looks like you are not able to play the videos and audios on your computer. I can assure you that you have not made a mistake by buying windows 8. We're here to help.

  I would like you to answer a few questions to solve the problem.

  1. What is the brand and model of your card graphic and sound card?

  2. do you have any error messages related to the audio and sound card when you ran Upgrade Wizard tool to level of Windows?

  3. What is the brand and model of your computer?

  I suggest you to check the status of your sound and graphic card and answer us.

  Check the status of the sound card in Device Manager.

  a. press Windows key + X , and then select Device Manager.

  b. search for sound, video and game controllers and expand it.

  c. right-click on the driver and click Properties.

  d. Select the general tab and look in the device status box to identify the problem with the sound card.

  Check the status of the graphics card in Device Manager.

  a. press Windows key + X , and then select Device Manager.

  b. search for graphics cards and expand.

  e. right click on the driver and click Properties.

  c. Select the general tab and look in the device status box to identify the problem with the graphics card.

  Your answers are important to us. Come back with answers.

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• When I unplug my headphones the sound does not go to my regular speakers and also the reverse happened... logitech headphones... HELP Please

  When I unplug my headphones the sound does not go to my regular speakers and also the reverse happened... logitech headphones... HELP Please

  Hi MaryLitrel,

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  How to update a sound card driver in Windows Vista and Windows XP

  http://support.Microsoft.com/kb/166774

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.