Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.
Original title: All of a sudden internet backgammon works not
Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server. Someone knows what's the problem? What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?
Hello
1. what browser do you use?
2 are you facing the same issue with other games like asset stings on the internet?
I suggest you follow these methods and check.
Method 1: You can check if the problem appears in a clean boot state.
Refer to this link: http://support.microsoft.com/kb/929135
If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.
Method 2: Temporarily disable the security software and check if the game works very well.
Refer to this link: turn off the antivirus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.
Refer to this link: turn enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
I hope this helps!
Tags: Windows
Similar Questions
-
I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.
Actually, no, the answer in the links were also less than helpful... suggested this, that. Things that I had already done b4 posting my question.
More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again. Coincidence? No doubt, but still... -
An error occurred during communication with the server
After Update to 1.1.3 will result in a message
An error occurred during communication with the server. Could not test the compatibility of the Folio Builder and server. Please check your network connection and try logging in the Panel again
I always can not connect to FOLIO BUILDER.
In countries where I am support for Digital editing Suite cannot be smooth .
I hope that I have learn you to Difficulty easy .
Windows 7, people who use InDesign 5.0, le 1.1.3 update and are problemslike me.
Windows 7 InDesign 5.0, 1.1.3, haven't seen anyone who uses un good .
I doubt this question is a known issue . Information associate at this place et watched them in the Forum for solve the the same eopeotdeongeot .
Je do not have speak good English .
Sorry to write only sentence is clumsy .
Come on, J’ai hope the problem is solved .
Progress of the project is order .Hello
Please refer to this topic in the forum http://forums.adobe.com/message/3880336#3880336. If you have any other questions, feel free to contact me.
Thank you
Michael
-
HP5520 - an error occurred during communication with the scanner
A HP5520 for a few months and all were working well. But today does not scan wireless.
I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:
"HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »
If I try to connect through system preferences printers and Scanners it throws up to the following error:
"Year error occurred while communicating with the analytical engine."
Any ideas?
Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.
-
F2480 An error occurred during communication with the HP imaging device
I've been troubleshooting for hours, the solutions provided by HP do not fix the issue. I get the following scanner twain, preview is loaded and crashes for no apparent reason, then after a few minutes, the error is displayed.
I have Windows 8.1 Pro 64-bit. I have been using this device with previous versions of Windows without any problem whatsoever. I have been using Windows 8 with no problems whatsoever. This problem however makes me crazy. And apparently I'm not the only one... Without the help of HP in sight, I'm about to go get a replacement no HP.
I'm sorry to say this weekend that I unplugged the unit, I uninstalled all the drivers and software HP and I am now using a new device from another manufacturer. I think it was simply a problem of compatibility between software and drivers and Windows 8.1, and given the age of the unit, I was expecting HP to solve.
Thanks for the trouble, if.
-
This message box appears quite a bit. All I have to do to solve it? Thanks for any solid help. MW
Hi Mary,
Please contact the Microsoft Community forums.
It seems that you are unable to send or receive messages on behalf of Verizon.
He would be grateful if you could answer a few questions to refine the question.
1. What mail client do you use? What is customer e-mail based on the web or Microsoft Outlook client?
2. are you aware of changes to the computer before the show?
3. do you use Internet Explorer to access e-mail? If so, what is the version installed on the computer?
This question seems a temporary problem with the server and you can consult again later.
If you use Internet Explorer, you can perform the steps described in the article.
The problems of access to webmail using Internet Explorer
http://support.Microsoft.com/kb/2483955
Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
If you use the Microsoft Outlook client, you can post the question here.
http://answers.Microsoft.com/en-us/Office
If you use Windows Live, you can post the question here.
http://answers.Microsoft.com/en-us/windowsliveHope this information helps. Get back to us if you have more queries about Windows.
-
Error during communication with the remote host when you create the new virtual machine
I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine
on the vcenter Server
At the end of 30-35 minutes, it gives an error
"Error during communication with the remote host"
The existing machines are working well... I tried to create virtual machines to other ESX servers as well
but the same question. I also tried to make the clone of existing machines, but without success
Can anyone help?
You rescan the LUNS once?
You've restarted the management agent?
You've restarted the vpxa?
If this isn't the case, please perform the step above and check out them.
-
Activation.
My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server
How to activate Windows XP
http://support.Microsoft.com/kb/307890/en-usSee the section titled: "how to activate Windows XP by phone.
Also, make sure that you do not confuse the product key numbers and letters
(number 8 for the letter B, etc.)How to contact a Microsoft Product Activation Center:
http://support.Microsoft.com/default.aspx/KB/950929/en=usMicrosoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxOnce Windows activated / Genuine Advantage Notifications:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
(This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)J W Stuart: Http://www.pagestart.com
-
Hi my community developers estimated!
I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.
However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:
QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.
Thank you very much!
Please see from the log of the errors below:
Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain2014 BuildDefaultDomain2.py - 07-04 18:00:03
cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
Process began
WLST > error occurred during initialization of VM
WLST > could not reserve enough space for lots of things
WLST > error: could not create the Virtual Machine Java.
WLST > error: a fatal error has occurred. Program ends.
Elapsed time: 437 msThanks James, I changed the memory allocation in the WLST script and I no longer get the VM error
-
An error occurred during registration of the IBR WinNativeConverter component
Manager components-> BOVINE infectious rhinotraecheitis select WinNativeConverter, update, restart IBR.
When I logged in IBR, after the error message displayed.
I think that the ActiveX control cannot register, please let me know if there is a solution.
[Error Messages] ==============================================================
The conversion of 'Outside In Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
WinNative system error Converter: the conversion of 'OutsideIn Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
System HTMLConverter error: conversion of 'OutsideIn Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
========================================================================
OS: Windows 2003 R2 Enterprise, 64-bit
University Complutense of MADRID: 11 GR 1 material PS5 (11.1.1.6.0)
[Detailed error messages] =.
! csPdfOIXError2, did not correct path.
< br >! syExceptionType, java.lang.Throwable
java.lang.Throwable
to pdfconverter. PDFCInstaller.postErrorNotice (PDFCInstaller.java:189)
to pdfconverter. PDFCInstaller.configureOIX (PDFCInstaller.java:126)
to pdfconverter. PDFCInstaller.configureWindows (PDFCInstaller.java:81)
to pdfconverter. PDFCInstaller.doFilter (PDFCInstaller.java:63)
at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
at docrefinery.server.RefSystemLoader.executeFilter(RefSystemLoader.java:321)
at docrefinery.server.RefSystemLoader.doFilter(RefSystemLoader.java:197)
at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
at intradoc.server.IdcExtendedLoader.executeFilter(IdcExtendedLoader.java:462)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:211)
at docrefinery.server.RefServerManager.init(RefServerManager.java:67)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:625)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:456)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:102)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1273)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:547)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
========================================================================If I had to guess (part of the stack is not present trace) and this configuration under Windows, I would say something was installed in a path with spaces.
-Maybe the Java runtime was installed at something like "C:/Program Files/Java.
-Maybe the House of Middleware has a space in the path.A less likely scenario is that the user account running the IBR process has insufficient permissions to install the OCX, or to read the path where the OCX has been installed by another user. This might occur if you install the software using the Windows "Administrator" account, without using the server of the infectious BOVINE as "MyServiceAccount rhinotraecheitis."
I think maybe this tidbit in the installation documentation, but for the IBR on Windows, it is imperative that the same account user will be used to install all software components. It may be less important in this case because the ILO is used, but it is still a solid strategy. (I saw in the struggle of people for days trying to understand issues IBR on Windows because they used several users to install the individual pieces - IBR, a printer, Ghostscript, office. They have always had to reinstall using a single user).
-
Hello
I install BIAPPS 11.1.1.8.1. I finished the configuration of BIAPPS and finally come to upgrade weblogic 10.3.5. to 10.3.6.
I stop all BI services and restart the server. After a reboot, I stopped the Oracle WebLogic NodeManager
at the time of the upgrade of the 1.3.5 weblogic server. to 10.3.6. I got the following error:
"Fatal error encountered during the installation of the file. The willingness of cleanup now install and get out! D:\Middleware\wlserver_10.3\server\win\x64\wlfileio3.dll(the process Cannot access the file because it is being used by another process)'.
Could you tell me please even if I stopped all services why I have this error and to overcome this problem what steps I must follow.
Thank you.
Hello
I got the answer that we must stop services databases oracle as well. We must stop DBConsole, NodeManager, TNS Listener and Oracle service and then start the 10.3.6 weblogic upgrade...
Do all this, then upgrade will be smooth.
Thank you
-
error occurred during installation urm on content server
"" We are trying to install version urm ' 10.1.3.5.0 (Build 07_06_2009) "on the content server ' 10.1.3.3.3 (080807).
the error occurs with the output of the server log:
helperservice: exception in INDEXERSTATE service. INITIALIZE_SUB loadFieldInfoFromMetadata [11]-32-32 cannot run the service (null) and function loadFieldInfoFromMetadata.
(System error: there is no such thing as the "dDecimalScale" column in this table.) The 'dDecimalScale' column does not exist in this table. [Details]
An error has occurred. The stack trace below shows more information.
! $helperservice: exception in INDEXERSTATE service. INITIALIZE_SUB loadFieldInfoFromMetadata [11]-32-32! csServiceDataException, loadFieldInfoFromMetadata (null)! $! csSystemError,! syColumnDoesNotExist\, dDecimalScale! syColumnDoesNotExist, dDecimalScale
intradoc.common.ServiceException:! csServiceDataException, loadFieldInfoFromMetadata (null)! $! csSystemError,! syColumnDoesNotExist\, dDecimalScale
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1739)
at intradoc.server.Service.buildServiceException(Service.java:1999)
at intradoc.server.Service.createServiceExceptionEx(Service.java:1993)
at intradoc.server.Service.createServiceException(Service.java:1988)
at intradoc.server.ServiceRequestImplementor.handleActionException(ServiceRequestImplementor.java:1450)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1417)
Can you find for me if there is a patch that will address this issue? »
Thank you very muchHello
This error occurs because you are trying to install URM 10.1.3.5 on UCM 10.1.3.3.3 and the error mentions "dDecimalScale". This new value has been introduced UCM 10.1.3.5.0 and for this you will have to download the latest patches from metalink 6907073 group and install and activate the same on CS.
Then restart the CS and quite sure that you will not hit this problem. This issue has developed due to version incompatibility.
Let me know the results.
Srinath
-
Have not received e-mails more than today. Went to e-mail settings to check what is on the rise and has received the above message. Sent an email from my BB to me and he did not, although my BB said he sent. I tried to restart and battery caps-alt-delete. The same problem. Internet browser works very well. I have not installed or removed all apps or anything like that. Any ideas what's happening?
BlackBerry Tour 9630 on U.S. Cellular
V OS 5.0.0.48 4 (Platform 4.2.0.214)
There is a delay spotty e-mail anywhere in America to the North this afternoon and tonight, covering several carriers (Verzion, Sprint, ATT, etc.). RIM said fixes are underway, but it could last more than a few hours.
-
I tried to restore my system 3 times because something is wrong and I wanted to get back to normal... but it keeps saying
Hi, Doris.
An analysis of the system by using the System File Checker
Start > type CMD
If you are using Windows Vista and Windows 7, right click on the CMD window and select run as administrator
If you use Windows XP, press ENTER to open the command prompt window
Type SFC/scannow
Press enter
Note: There is a space between sfc and / scannow
How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228.------
If it is missing or damaged you will be asked for your Windows Recovery CD/DVD files so please with it.
You can also view the solutions proposed in these discussions:
-
I tried to uninstall the faulty data filter & reinstall download (KB911895). all attempts fail & downloads auto continues trying to install "ad noursium". How can I solve this problem please someone? Brian
Hello
Step 1: Follow these steps and then try to install the update.
1. go to the location: c:\windows\system\drivers\
2. search for and rename the file wdf01000.sys wdf01000.old
3. restart the computer.Step 2:
Reset windows update components
http://support.Microsoft.com/kb/971058
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Pavilion P6520f desktop computer: Pavilion P6520f Desktop will not be upgraded to Windows 10
Assistant Windows 10 upgrade keeps telling me that my system is not ready, because they work with partners and inform me. This system has no changes or software changes. It is in this State for Windows 10 has been released.
-
disable the system code (66733095) error
-
Re: Bios Update Flash of NB200 NB205 series posted by download
For those of you who are interested, the flash of the bios can be downloaded and installed. Download, extract the files and read the readme file to find out how to install the flash update. Here is the link: http://www.csd.toshiba.com/cgi-bin/tais/su
-
Qosmio G30 display flickering and cannot connect to Windows
I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.Now, it's ev
-
I recently bought 7plus Tablet and it conect WiFi great but when I turn it off and turn it back on I need to set the password for WiFi again. My wife has the same kind of Tablet, but has not this problem isn't there something I can do. Thank you