Internet connection down.

When I turn on my laptop and it tries to connect to my wireless network, he knocks out the internet connection for my office wired and other wireless pc. To cycle power to the router and often it does not solve the problem. Using Linksys wrt110. Have disabled security and firewalls to ensure that it is not the problem. Any suggestions?

You need to reset your router hard... Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

Tags: Linksys Routers

Similar Questions

  • Internet connection down, windows 8, reset wireless network adapter

    I am running windows 8 on a computer laptop dv6 HP Envy and my internet connection keeps falling every few minutes.  This is due to the wireless network card and I have to reset the connection manually each time.  Even plugged into my modem, the connection drops.  I had my ISP reset the modem, tested and it works fine.  My connection is still down because of my network card.  Help, please.

    If you run the dism.exe / online/cleanup-image /restorehealth it may very well be able to fix the corrupted files. If necessary reruns sfc / scannow.  Hope this helps and if you need another post to help and we will be happy to help you.

    The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir.

    If you have one foot in the past, one foot in the future, you're pissing on today
  • Pavilion 15 - ab219tx: Internet slows down after connecting the mobile to WiFi.

    Previously, I had a problem where internet connection slowed down painfully when cell phone charges. I tried to reset the power settings. Now I can connect to the laptop... However, now the problem is that if connect you to WiFi via the laptop, regardless of if its loading or not, the internet becomes ridiculously slow. And if the wifi is turned off, it returns to normal. Help, please.

    . Hi @ARD09,

    Thanks for your reply. I review the post. I understand that drivers are a bit old. I first want to eliminate hardware issues with the computer's wireless card by performing all the steps which are associated software.

    I understand perfectly that WiFi and wired Ethernet connection both seem to be slow.

    A few steps to try:

    I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. I'm always here for you help. Please reach out at any time.

    Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

    Now carefully and have a wonderful week ahead.

  • Connection WiFi to internet goes down

    Hello

    I have a problem with access to the internet. After a few minutes, the WiFi connection to the internet goes down, and I'm not able to access internet again unless I restart the computer.

    I appreciate your help.
    JoPa

    Hello

    It will be interesting to know which laptop mode and wireless network card you have. Now I can just recommend to install the latest driver for WLAN card. If you have the Intel card inside it please visit http://support.intel.com/support/wireless/
    Good bye

  • WRT54G2 slows down the internet connection

    Hello.

    Somehow, my WRT54G2 router slows down my internet connection. My PC is connected by cable and I cannot watch youtube videos and gave to wait fo 20 seconds for gmail to load up. If I connect the PC to the modem directly then everything works fine. Reset to the default router configuration solves the problem for a few weeks, but this solution is quite annoying. Is there another way to solve this problem once and for all?

    Thnx.

    In the latest version of firmware notes, it is written:

    -updated with the patch to solve the problems of ping

    I'll try to update my routers firmware now, if this will fix my problem, I probably won't respond to this thread more.

    Router support page:

    http://homesupport.Cisco.com/en-us/wireless/LBC/WRT54G2

    Firmware release notes:

    http://homedownloads.Cisco.com/downloads/WRT54G2V1.5_1.5.01.013_FwReleaseNotes.txt

  • Internet connection problem, error: status WAN down.

    Hello. We have a Windows 7 and a Motorola 2247-N8 wireless modem/router. Recently, our internet connection has dropped. I was able to reboot the router, but on the main login page, it says "Status WAN" is declining and the PPP username and password are empty. These two things are related? Can I do to solve this problem? Thank you.

    Thanks for the information.  Your observation of the Westell modem/router is in line with what your ISP says you: your modem is assigned an IP address by a DHCP server at your ISP.

    Your two pieces of equipment have in fact several parties.   Both of them have modems, which is the interface between you and your ISP.  Both of them have routers.  A router is required between the two networks; in your case, this is the Internet on one side and your local area network (LAN) on the other side.  Unit integrated Motorola also a wireless access point.

    You only need one of each part: a modem, a router, and a wireless access point.

    Normally, you should be able to use the Motorola device and renounce the Westell unit.  However, the unit modem Motorola seems to have a problem to connect to your ISP.  According to the User Guide, that I found for him, this unit of Motorola doesn't seem to be able to connect to the type of system used by your ISP.

    You can use parts of two devices: the modem and router Westell unit and wireless point from the Motorola unit.

    I'm going to assume that this is the User Guide for the your Motorola device--> http://www.arrisi.com/modems/datasheet/2247-n8/2247_user_manual.pdf

    Connect an Ethernet cable between your computer and one of 4 yellow Ethernet ports on the unit of Motorola.  Open a web browser and type http://192.168.1.254 in the address bar and press enter (see page 13 operating Guide).  You may or may not assign a password for the configuration utility (you should end this) as described in step 4.  Skip steps 5 to 7.

    Click the "Configure" (page 16), then click on "DHCP server".  Uncheck the box "Enable DHCP server", and then click "apply changes".  You want to disable the DHCP server in the Motorola unit because you plan to use the DHCP server in the Westell unit.

    If you already haven't, go back to the configuration menu and click 'Wireless' and set "of basic wireless settings" (p. 21), you want wireless to be activated, you want the 'Standard' to be compatible with your laptop and other wireless devices (B/G/N is the most flexible; use G or N-only if you know that all your wireless devices use the same wireless standard).  I recommend uncheck Wireless Protected Setup.  "Channel" should be 1, 6 or 11 (you may or may not need to change the channel; in general, this is necessary if you live in an area where there are many nearby wireless networks, as a residential building).

    In the "Wireless security" (p. 23) article Choose WPA2 if all your wireless devices support this standard. Otherwise, use WPA.  Don't use WEP or anything.  Do not 'hide the SSID' or "Block Wireless Bridging."  If you wish, enter a new name SSID (p. 24). If you do this, do not use your name or address in the SSID name.

    Make sure you click on "Apply changes" once you make a configuration change.

    At this point, you can exit the utility of configuration of the Motorola.

    Disconnect all connected to DSL entered the Motorola phone.

    Plug the phone cable between your wall socket and the entrance of LILY on the Westell unit.

    Connect an Ethernet cable between the port of 'Data' at the back of the Westell unit and one of the yellow Ethernet ports on the unit of Motorola.

    At this point, you should be able to access the Internet using any device connected by wifi to the Motorola unit or (b) any device connected to one of the 3 Ethernet ports yellow on the unit from Motorola which is not used to connect to the Westell unit.

    Last words:

    If you created a password to access the device configuration utility (and you should), write it down on a sheet of paper and the paper to the tape drive.

    The IP address, you need to use in order to access the configuration of the Westell unit unit is 192.168.1.1.  Write this on the same sheet of adhesive paper such as password and the Westell Westell unit.

    The IP address, you need to use in order to access the Motorola unit configuration utility is 192.168.1.254.  Write this down on the same sheet of paper as the Motorola password and stick it to the Motorola unit.

    The DHCP server in the Westell unit by default local IP addresses assignment between 192.168.1.15 and 192.168.1.47.  This should be more than enough.  You can check the IP address local to any computer by opening a command prompt window and typing in Windows

    ipconfig/all (press on enter)

    This will show you the IP addresses assigned to all NICs (wired and wireless).  You need only be concerned with IPv4 (not IPv6) addresses.

    Note that if you open a web browser and go to a site such as http://www.whatismyip.com/ , you will be able to see the IP address public attributed to your Westell modem by your ISP's DHCP server.  In this case, "public" means that all users can see at this address.  However, router Westell "cache" local to your devices IP addresses so they are not visible on the Internet.

  • My laptop is down the internet connection several times daily.

    Internet connection

    My laptop is down the internet connection several times daily. I can usually restore the connection to solve the problem. It restores the connection for a while but always says the same thing. «A network cable connected correctly isnot or can be broken and also problem with wireless adapter access point.» I live with 3 other people and we all use the same router and they have no problems.

    Also, my computer has some weird pink points at the top of the home screen. So sometimes when I pull up to early or a photo or something there are pink lines on the photos. No idea why this is happening and how to fix it?

    I discovered that I had the same problem of the abandonment of the Internet with HP envy. I went on the Intel site and found that they had a fix for the problem I do not know the wireless card you have that I go to your site of NIC and check and see if they have a patch for your network card. After I installed the patch for my NIC my problem disappeared. HP sent me an email with the appropriate also fix.

  • Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

    Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

    Please let me know how to start.

    Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • No internet connection, but I'm online? CAN´t activate my ps 13 items. STIs of firewall already down...

    No internet connection, but I'm online? CAN´t activate my ps 13 items. STIs of firewall already down...

    Go crazy with this - please help me...

    Thank you very much

    Thomas

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

    https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

    After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  • Does anyone know of an excellerator I can down load to speed up my internet connection. I have dial up windstream, I live in the middle of no - where, KY and have no access to broadband intewrnet here, Please HELP.

    My internet connection is very slow dial up thru windstream and they do not offer high speed here where I live and or not anyone but Hughes Net, but they are way expensive. Not an option for me at this time. I used to have switched to the southeast of the phone and they gave me an excellerator which speeds everything up.

    Did you ask to Windstream regarding the availability of an accelerator?

    "Accélération" a dial-up connection connection is much more than an add-on or plugin of a web browser. There is a "backend" to popular content from the cache, a method of "compression" of images, caching of the original image and deliver the image "compressed" to the browser. Basically, if your ISP does not offer this feature, you can not add it with a single "Accelerator".

  • Equium A100-147: Internet connection shuts down when idle

    I had a problem with my computer since I bought it, that my Internet connection is cut on me, apparently after I let the computer idle for a short period of time.

    Currently, with a direct cable connection, I can get the connection up and running again by disconnecting and then reconnecting the cable, but sometimes that doesn't work and I have to restart my internet box to raise the connection again.

    When I use the wireless, the same thing is happening, although I always reload the internet zone to re-establish the connection. It seems to be a problem of time, but I can't work on how to solve this problem. Any suggestions?

    Hello

    This sounds like a problem in the router settings (internet box)!
    My router supports an option that seems very similar to you time-out problem!

    If this option is enabled router disconnect after several minutes (this depends on the settings) if the internet connection is no longer necessary!

    I think you should check the router options!

    Good luck

  • WRVS4400N slowing down my internet connection of 100 MB

    Hello

    I have a Cisco WRVS4400N on the latest firmware and I just had my Virgin internet connection set to level to the 100 MB. Once I thought it was put at level I checked with a broadband speed test and she is back in the download 15 MB and 5 MB download. Before I rang Virgin I thought I would check with a direct link to my pc directly to the modem. Ran the speed test and it came back in the download of 100 MB and 5 MB download. I thought that the best thing to do is to restore my settings back to the factory and its still the same. I was wondering if anyone can help?

    Thank you

    Andy

    Hello.

    These products are processed by the Cisco Small Business Support Community.

    * If my post answered your question, please mark it as "acceptable Solution".

    Thank you!

  • "" My internet connection is constantly down and back on the error "negotiating IPsec year failure prevents the connection.

    Original title: The IPsec negotiation failure prevents the connection

    My internet connection is constantly visitor drop-off and restarted, and when I troubleshoot I get this message "the IPsec negotiation failure prevents the connection." I don't use VPN or anything so I have no idea what it means. I restarted the router several times. Any other ideas?

    Hello

    1. you are using a wired or a wireless connection?

    2. If it works well before?

    3 did you changes to the computer before the show?

    Method 1: Reset the router and see if that helps.

    Note: To help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

    Method 2: Uninstall and reinstall the NIC drivers and see if that helps.

    See the following steps:

    (a) click Start, right click on computer.

    (b) click on properties, click on Device Manager

    (c) expand the network card, right-click the wireless adapter option

    (d) click on uninstall

    (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

    Reference:

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Internet connection no longer works unless I have disconnect and reconnect the wifi regularly

    I find that after a time random, maybe twenty minutes a half an hour or so, my internet connection breaks down and it can only be fixed by disconnecting and reconnecting to my wifi network.

    It is a problem on my iMac of retina 2014 running El Capitan and 2011 MacBook Air my wife running Mountain Lion (but not on my MacBook Air of 2011 which takes place in Yosemite).

    It does not seem to be triggered by almost anything, but it's maddening to have to do all the time. It's a router NetGear btw, less than a year.

    If anyone has a solution I'd love to hear it!

    Greetings, peederjigson!

    Welcome to the communities of Apple Support! It seems you have some problems to stay connected to the Wi - Fi on some of your devices. This is not how it is supposed to work so I'll be happy to help you.

    Use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - even with a new router, the firmware may need to be updated. But this article can go a long way to point out where it is.

    The potential of Wi-Fi and Bluetooth interference sources - because this is not the case with all your devices, it could be other things blocking the signal. Here are a few potential sources.

    Recommended settings for the WiFi routers and access points - because your router is "-ish" make sure that the settings are correct.

    Have a great day!

Maybe you are looking for