Internet - connection drops with my Toshibha laptop/internet connectivity issues arrives and stops randomly

Original title: Internet connectivity

my computer toshiba laptop windows 7 just started to fall sharply internet all in a show that is to connect to the internet all my other devices all always online - internet comes back randomly and goes off randomly - tried all settings to make sure that everything looks good.

Hello

Welcome to the Microsoft community.

I understand that you have a problem with internet connectivity. We apologize for the inconvenience caused to you. We also indicate the steps you did.

I would like to know the details below to help you better.

  1. What is the model number of the laptop you are using?
  2. Do you have a code error message when connecting to internet?
  3. You did changes to the computer before the show?
  4. You are connected to an internet connection wired or wireless?

I ask you to run the Network Troubleshooter utility first to see if it can help diagnose and solve your problem. Open the utility of network troubleshooter by right-clicking the network icon in the notification area, and then click troubleshoot.

You can also run the troubleshooter of Internet connections by:

  1. By clicking on the Start button, and then clicking Control Panel.
  2. In the search box, type Troubleshooting, and then click Troubleshooting.
  3. Under network and Internet, click connect to the Internet.

If the problem persists, try to perform the steps of troubleshooting mentioned below in Microsoft Help article and check if that helps.

Why can't I connect to the Internet?

http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

Keep us updated on the issue to help you better.

Tags: Windows

Similar Questions

  • cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

    Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name

    Hello

     
    • What operating system is installed on the computer?
    • Have you tried with another name?
    Go to network and sharing settings and check the name of the previously defined network.
     
    Try the following steps to do the same thing:
    a. right click on the Network icon located on the bar spots.
    b. click on open network and sharing Center.
    c. under view your information network base and installation connections check information (network name).
    d. try another name in order to set up a network.
     
    Reference:
     
     
    I hope this helps!
     
  • After worsening in the last month that I finally drop with Firefox - 2 hours trying to get today and still not satisfactory - what happens?

    It is impossible for me to put in operation these days and get an instant response. The faster this last month has been an hour - after will disappear and return at intervals. It seems to go better after 08:00 but that it no good for one early don't like me - I should be able to connect at any time, but I can't. As I'm not technically mind I pay someone to come and fix this - and they seem to do it but then it would be when they visit later in the day - but as soon as they are out of the door he's back. I was recommended to use Firefox as it is no longer compatible for my use and served for three years, but now I'm going back to what I've already used on the need, of despair and frustration. Shockwave flash may be busy... plugins does not respond. I am happy to see the back of all this, but such a shame really.

    You seem to be using a very old Firefox profile folder.

    For example, your system details list shows security.enable_ssl2: True and SSL2 did not had been in charge for a while now (Firefox 8 +), so it might be a good reason (opportunity) to start with a fresh profile, through a refresh or through the Profile Manager.

    Reset is not too difficult and requires to open help > troubleshooting information page.
    This page has a reset button to reset Firefox and create a new profile.

    Another possibility is to hold down the SHIFT key pressed when Firefox starts with a double click on the shortcut on the desktop.

    This gives the Safe Boot Mode dialog box that also has a button Reset Firefox.

    When you reset Firefox and a new profile is created and some personal data (bookmarks, history, cookies, passwords, data form) are automatically imported and the current profile folder will be moved on the desktop to a folder "Old data Firefox".

    Installed extensions and other customizations (toolbars, Pref.) that you have made are lost and must be redone.

    It is possible to recover more data from the old profile, but be always careful not to copy the files corrupted to avoid transporting on the problem.

  • Set up connection VI start and stop without losing or deleting data

    Hello

    I currently use a PCI-6280 M-series and a card PCI-6601 of counter measurements on Labview 2010.

    I have 3 tasks implemented, 2 tasks of linear encoder on the 6601 counter and 1 analog input task with 4 inputs x on my 6280.  All of these are timed with a counter on the 6601 through a RTSI line.

    All of these tasks, I have a similar setup as the picture in http://zone.ni.com/devzone/cda/tut/p/id/9574 except that they are all set up as only "Log" and "create/replace" for the logging.vi configuration file.

    Because I want to have the encoders permanently locate my position, I never "stop" the tasks of meter.  However, I need to use the data acquired after each trip along the way to get and process location and subsequent analogue input data points I have.  What I did, I would be 'stop.vi' my clock on the counter sample, and then open the PDM file, read the file PDM, get the table from there, close the PDM file, then "run.vi" the clock on the counter sample.  However, I found when I stop the sample clock, not ALL data points have been listened to in the file.

    For example, say I move my cart to 100mm to the right during recording, then stop the sample clock, get the PDM file table, find the size of this table called 'X' for future use.  Then I get the ramasseherbe on the origin WITHOUT restarting the clock.  THEN I start the sample clock and move from 100mm to the left.  After that, I once again, stop the sample clock and get data from my file tdms starting at the offset of reading on "X + 1".  I EXPECT that this table SHOULD start at 0 then go to the 100 mm to the left.  However, what it does, is that I see the data begin at 100mm from the right for a few data points, then GOES to 0, then moves to the left as planned.

    I propose this means that when I stop the sample clock, data from meters (stamp?) not all were listened to the tdms file yet, and when I start the clock, the rest becomes she dumped.  Here, I'm confused because I thought that 'configure logging.vi' stream directly in the file without a buffer.

    I was wondering if I'm doing something wrong, wait bad things, and if there is a way to apply what I want.  As in, is there a way to dump data remaning in the "buffer" (I tried the tdms vi flower, but that didn't work and I didn't think it was relevant) after I stop the clock or something like that, or is my implementation to offshore competely.

    Thanks for reading,

    Lester

    PS. have a way to read the most recent point counters would be great also.  However, whenever I put the offset or relative to the most recent, it is said that I can't do during indexing, even if I saw a community post saying that it works with analog inputs.  This is perhaps off topic, but yes, now I'm just trying to get the tables of PDM works, thank YOU!


  • A17 Bios Update laptop frozen when update completed and stop the habit

    I ran the detected BIOS A06 updated from A00, and the AFUWINGUI utility updated all the blocks and shows

    Stadium: Done on the screen and

    Address: FFFFFFFFh on-screen

    But the utility AFUWINGUI itself is the status of Windows (not responding) displayed in the upper part of the application and all the fans run at full speed, and the keyboard/trackpad do not react

    I can't make it appear taskmanger, and the power button does not respond so I can't stop it

    She completed the update, but nobody knows how to impose a stop/restart?

    You can unplug the unit and remove the battery.  Press and hold the button for 5 seconds should work to force shut down the computer, even if it's a block of material.

  • Internet with the new portable computer connection issues...

    I just bought a new laptop with Windows 7 and I constantly have problems connecting to the internet - and when I do connect his at a very slow speed.  I didn't have this problem with my old laptop which has Vista.  What should I do?

    Hello

    1. do you have a cable or a wireless connection?

    Step 1:

    Update of your network card drivers and check if it helps.

    Step 2:
    Uninstall and reinstall the network card.
    Follow the steps below to uninstall and reinstall the network card.

     
    a. click on start
    b. in the type of search box of start of "devmgmt.msc" and press enter
    (c) in Device Manager, expand network adapters
    d. right-click on the network adapter and uninstall.
    e. restart the computer, and then reinstall the network card.
     
    When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.
  • I want to increase the frequency with which my laptop computer's clock is set automatically by contacting an internet time server.

    I want to increase the frequency with which my laptop clock is set automatically by contacting an internet time server. In XP, there is a registry setting for the number of seconds between contacts with a time server. Where is this setting in Vista Home Premium 64-bit?

    Hello

    I'm in Seattle and generally use time of Microsoft servers

    This is a list of time - stratum servers 1 and 2 levels.

    A list of time servers Simple Network Time Protocol (SNTP) that are available on the Internet
    http://support.Microsoft.com/kb/262680

    World time server
    http://www.WorldTimeServer.com/

    World time server - Seattle (online)
    http://www.WorldTimeServer.com/current_time_in_US-WA.aspx?city=Seattle

    The State of Washington
    http://www.WorldTimeServer.com/current_time_in_US-WA.aspx

    The naval Observatory time
    http://www.usno.Navy.mil/USNO/time

    This list, the phone number for time to Naval Observatory, CO - + 1 719 567-6742 (Colorado Springs)
    and there is more information and links.
    http://Wapedia.mobi/en/United_States_Naval_Observatory

    Sorry, no info on the atomic clock at the phone number. Maybe try your favorite search engine.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my provider internet-how can I change my password now?

    original title: Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my internet provider. I want to change my password now. How can I do this or do I need to contact my provider to do this? __

    Hi, I have wireless internet in my house and I gave my password system so that others in my home with laptops can use my internet provider.  I want to change my password now.  How can I do that or do I need to contact my provider?

    Normally, you must have set a wireless router with a password to the wireless network using the wireless network that you have set up in your home.

    If above is the case, read the information that came with your router, or search for it on their website on how to change the settings in it.

    See you soon.

    Mick Murphy - Microsoft partner

  • With the help of a PIX501 to secure and share an internet connection by cable

    Hi all

    I bought a PIX501 to secure my home cable modem connection and share it around my house. The PIX will act as a DHCP client (my ISP uses dynamic IP addressing) and use nat and DHCP break with my small number of inside customers.

    The default setting (set using the set up of PIX) seems ok - but I did a little "do-it-yourself" after some negative PIX customers I've read here in the United Kingdom.

    Specifically, I: -.

    -A refused requests incoming icmp (to make the "invisible" PIX to the outside world)

    -Created an access list to allow answers to my outgoing ping (something every geek network must be able to do)

    -The value "string fragment 1 outside" to drop incoming fragmented packets

    -Limit the number of connections to 200 and embroyonic at 50

    -Activated floodguard (although I don't think this should be necessary on such a lightly loaded network)

    -Compatible console logging so I have at least a bit of history of all attacks

    -Reduced some of the delays of the connection of their default values

    As I have a relatively new to this kind of thing anyone have specific advice or tips for a pix used this way?

    Thanks in advance,

    Andrew.

    When you work with ICMP, remember that [icmp] command to assign ICMP messages for the pix as the host, while the [access-list] command is used to assign ICMP messages that pass through the Pix.

    If you are using IPSec tunnels through the Pix, you can consider letting in string fragment of 2 sizes. IPSec creates broad enough to cause a lot of packets to be fragmented. Path MTU discovery would prevent, but many networks prevent incoming requests that allow the discovery to work. For this same reason, you can also consider allowing the Pix to get unreachable inside your host name if you the Pix end VPN tunnels. [icmp outside any unreachable towing]

    Floodguard is enabled by default and does not need to be enabled. It should not be necessary on a little loaded network, but it would be necessary at the time of a DoS attack if you are Pix does authentication "uauth" of traffic entering or leaving the network.

    If you are interested, the Pix can authenticate users inside before allowing the traffic leaving using RADIUS. This is useful in situations like a web server inside is attacked from outside. By the application of authentication for other traffic to leave for offending guests options are very limited. A timeout is used to trigger authentication again after some time. The [floodguard] is used to protect this feature "uauth' of the Pix.

    The Pix has signatures VERY BASIC integrated IDS that you can activate by using the set of commands [assessment of intellectual property].

    Enable SSH for authentication and encryption by generating an RSA key and saving it to Flash. [AC product key 1024 rsa] and [ca save all] disable telnet by removing all orders [telnet] and replace them with [ssh]. [http] should also be limited as much as possible for the administration.

  • Connection drops with my Nighthawk D7000?

    I use my new D7000 since around Christmas and receive drops occasional in internet, mainly on wireless devices (phone and laptop), but also sometimes my main PC, which is connected via homeplugs!

    I didn't have any problems with my previous router (a TP Link W9800) I noticed but every now and again the Nighthawk seems give up connection and then reconnect in 30 seconds about!

    As far as I can see there is no real 'internet' fall but rather the camera itself suffers the disconnection of the router - I had a quick glance in newspapers and at the time of the drops, it fits the following:

    [IP DHCP: (192.168.0.2)] MAC address [MAC laptop] Friday, January 15,2016 19:48:50

    I reserved IP addresses for all my devices so I'm surprised that it seems to be their reallocation of an IP address!

    I did not upgraded to the latest firmware just because I read that some people have problems with it - we think it might solve my problem? My only other option is to go back to the retailer for a replacement I guess?

    Thanks for the pointers to find guys to the question...

    2 nights with no drops perceptible on the laptop or on my laptop!

    I'll say quietly just in case, but I think that would have solved my problem!

    Thank you to everyone who chipped in - finger crossed it is sorted!

  • Satellite C660-258 - Internet connection issues

    Recently, my laptop started to suffer serious problems when you try to connect to the internet.
    My download and upload slow to a crawl (only for laptop)

    Usually (according to speedtest.net) I get around a download about 4 but on my laptop it reaches maximum 0.09 dl.

    Whenever I restart my laptop it works kind of during about 10 minutes (I get about a 1 download), but then it slows down to a crawl.

    I confess that I am not the most tech savvy people so I only did the basics (turn it on and try again, other connections, reset the router, connect through a cable) but none of this has worked.

    Any help you could provide would be most welcome.

    Oh btw, my laptop is a
    Satellite C660-258

    Hello

    To be honest I don t understand your problem you have a problem with the internet connection is slow?

    Usually, this is not a problem or computer in the system but the problem with the connection provided by the internet provider (ISP).

    However, you compared the speed using LAN and WLan?
    Did you check the internet connection by using other WLan hotspots or other WiFi network?

    Do this!

  • Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

    Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

    What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

  • Need help to repair the internet connection; Airport extreme and microsoft xp pro

    I have the internet service of Rogers, a Dell laptop with microsoft xp professional and Apple airport extreme. I can't connect to the internet. I tried Apple, Rogers and Microsoft and no one can solve the problem. This has happened once before and Rogers has solved the problem by changing something on the WPA or WPA2 but I don't remember the details and they don't seem to help. We rebooted the router and my pc. I deleted and readded the connection; not good. Someone at - it ideas?

    Hi Julie,.

    1. do you receive an error message or error code?

    2 have you made changes on the computer before this problem?

    WPA authenticates users to ensure that only authorized people can access the network. There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards.

    This problem can occur because settings of Internet connection or drivers, try the following methods and check if it helps.

    Method 1:

    How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

    Method 2:

    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

    To disable authentication IEEE 802. 1 X, follow these steps:

    a. Click Start, type ncpa.cpl, and then press ENTER.

    b. right click on your wireless network connection, then click Properties.

    c. click the wireless networks tab.

    d. under preferred networks, click your wireless network, and then click Properties.

    e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

    Refer to the steps in the following Microsoft article.

    Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Keep us updated on the status of the issue.

  • Loss of internet connection after sleep and the computer will not be closed.

    I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

    Hi bobert1953,

    This problem can occur when the power management profile turns off your network adapter.

    Method 1: To disable power management feature ent of network cards

    a. click on start

    b. right click on computer

    c. click on manage the

    d. click on Device Manager in the left pane of the window

    e. expand your network card.

    f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

    g. go to the power management tab.

    h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

    i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

    Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

    After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

    http://support.Microsoft.com/kb/937477

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My laptop is connected to a Modem wireless with full signal but the modem is having "of connectivity issues.

    I tried the usual unplug the Modem and rebooting. However, all other computers in the House are connected to the same modem and all is well and they are connecting to the internet with no problems. Solutions?

    Thanks, looking a bit around and found that many people had the same problem due to an update to McAfee four days ago. So I restored just the laptop to before this date, and the back, everything works well.

Maybe you are looking for

  • Pls help with Apple TV 3!

    Hello everyone! I have a big problem with my Apple TV 3 (model MD199LL/A). I need your help... I watched my Apple TV yesterday and it started to reboot. Light - thinking 3 min and restar... I connected Apple TV for iMac and did restore from iTunes. N

  • How to limit time to receive calls?

    Hello! Is it possible to put a time limit to receive Skype calls? For example, from 10 to 14 h. If so, how? Thanks in any case!

  • El Capitan degrades the OS functionality

    I installed El Capitan 10.11.2. Update went well, no problem. Since then, however... Scanner CanoScan 4400f is no longer supported. Canon 5 d mk3 camera is no longer recognized and Photos usurps my favorite Adobe Bridge and Adobe Downloader. Office 2

  • MPrint spooler does not not on my Windows XP

    My print spooler does not work on my windows xp. I tried to restart on the way to the print spooler service and click Start, I get an error 1068, when I try to run the software for my Office jet 5780, which he continues to stop the print spooler does

  • How to connect automatically

    Tired of sign every time. What should I do if I do not sign whenever I want to visit my e mail or a Web site?  Thank you