Internet connection sharing does not work anymore

Similar Questions

• ICS - Internet connection sharing does not

  I build two computers with Win7 Ultimate and need to share a modem on a wired network connection. I have got the file sharing to work between the two machines and followed all the instructions concerning the ICS, but still not get the no host machine to connect to the Internet. I chose the option on the host computer to allow machines on the network to control the connection, and of course, when I plug the cord of connection linking the two, the host dials upward. However no program on the computer no host can actually communicate.

  You are in the right place.  The host of cable connecting network address IPv4 is not what it should be, which indicates that ICS is not configured correctly.

  While remaining in 'Control network and Internet\Network connections', right click on the connection dial-up, and then click Properties > sharing .  If Internet connection sharing is checked, uncheck it and click OK.  Then go back and put a check mark in this box to re-enable Internet connection sharing.  If a box appears asking you to select a private network connection, select the connection of cable system in the menu.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• internet connection wifi does not work after entering safe mode

  It works when I connect it to the router with cable, I had this problem before & there was a command typed in cmd that solved but I can't remember it, any help?

  Interesting... If you have booted without failure then you restarted in normal mode and your wireless settings no longer work?

  UH... Well the first thing I would do is to disable and reactivate my wireless card.  The second thing I would do is check I get an IP address on my wireless network, this is done in the command line (cmd) by typing "ipconfig".  If you get an IP address then you know that your router works on the dhcp protocol, but to confirm I would ping the router, which will be your entry door, which is usually something like "ping 192.168.1.1".  If you do not have an IP address, you should try to renew and see if you can buy a... "ipconfig / renew".

  In addition, you will need to check that you are actually connected to a wireless network, it should appear in your software wireless windows, or you proprietary wireless NETWORK card software.

• Internet connection suddenly does not work

  My computer suddenly stopped being able to connect to the internet.

  I use a Belkin Surf & share Wireless... Dongle USB and never had any problems before.
  The router works fine, I connect to it on my roommates Mac here where I am writing this question.
  If I can connect to the router and system tray icon says I'm connected. But when I open Chrome or Opera or try and connect to a FTP server (which I need to do for work!) I can't make the connection and the sys tray icon changes from normal to problem with yellow exclamation sign. When I run a diagnosis it is no problem, and when I look at the details, he said "it can be a problem. The funny thing is that sometimes this translates the sys tray connection status icon back to normal and very occasionally, I am able to load a web page, but then the connection breaks again.
  Here is the ipconfig/all command Info:
  Windows IP configuration
  HostName: Windows7-PC
  Primary DNS suffix: -.
  Node type: hybrid
  Active IP routing: no
  WINS proxy enabled: no
  Wireless Network Connection 10 wireless LAN adapter:
  State of the media: Media disconnected
  The connection-specific DNS suffix:
  Description: Microsoft Virtual WiFi Miniport Adapter [hash] 5
  Physical address: 94-44-52-DA-8B-FC
  DHCP enabled: Yes
  Autoconfiguration enabled: Yes
  Wireless Network Connection 9 wireless LAN adapter:
  The connection-specific DNS suffix:
  Physical address: 94-44-52-DA-8B-FC
  DHCP enabled: Yes
  Autoconfiguration enabled: Yes
  Link-local IPv6 address: fe80::c15f:f4be:4165:1f8a % 52 (Preferred)
  IPv4 address: 192.168.1.29 (Preferred)
  Subnet mask: 255.255.255.0
  Lease obtained: June 12, 2013 09:39:40
  End of the lease: 12 June 2013 11:09:47
  Default gateway: 192.168.1.1
  DHCP server: 192.168.1.1
  DHCPv6 IOOKING: 915686482
  DHCPv6 DUID client: 00-01-00-01-15-B7-8A-65-00-25-22-B2-47-29
  DNS servers: 89.101.160.5 / 89.101.160.4
  NetBIOS over TCP/IP: enabled
  Then, there's stuff on tunnel adapters
  I really need to make it work for my work, ideas, what could be the problem?
  Thank you
  D3

  Hello

  To provide the proper resolution, I would need more information on your side.

  1. deal with any issue while using Internet Explorer?

  2. is the specific issue while trying to open the FTP server?

  3. deal with any issue while accessing other Web site?

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  Method 2:
  If the problem persists, I suggest you try to reset TCP/IP. Check if it helps.

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
  • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• Canvio connect II does not work on Mac

  I have a canvio connect II and I had to format it because Windows 7 does not recognize, I did said Toshiba, for formatting so that the hard disk has unit. I formatted with NTFS and my problem is when I connect my Mac hard drive, I can't save anything, I can't make a backup... Then my canvio connect II does not work in my Mac.
  How can I put all the software that had my hard drive? Where can I download them? How to install?

  Thank you!
  Alberto.

  I saw in the toshiba tutorial this hard drive driver "Tuxera NTFS for Mac" it allows to read and write data in Mac and Windows, how can I get this driver?

• Option Internet PCI card does not work

  Last week I had format my Satellite and I had installed Windows 7, 64-bit, but now the Internet PCI card does not work.

  It says that my Radio power is off, even if in reality is not.

  I had the same card for Windows 7 Version, but unfortunately Internet update for nothing.

  Please can you help me.

  Thanks in advance

  Can you please tell us which model of laptop you have exactly?

• Automatic update does not work anymore

  My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

  Is enyone knows how to get around this problem.
  The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

  I am running Vista sp1

  Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

  It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  net start cryptsvc

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  regsvr32 c:\windows\system32\wuapi.dll

  regsvr32 c:\windows\system32\wuaueng.dll

  regsvr32 c:\windows\system32\wucltux.dll

  regsvr32 wups2.dll

  regsvr32 c:\windows\system32\wups.dll

  regsvr32 c:\windows\system32\wuwebv.dll

  net start bits

  net start wuauserv

  net start Eventlog

  1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
  2. By pressing CTRL + V on your keyboard to paste the content in your response.
  3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Logitech Internet Pro mouse does not work well.

  I have a Logitech Internet Pro muse and his does not work well since last month. Maybe I should clean a tell me please to open this optical mouse to clean or may be a virus is there or Spring does not work. The model information is on the http://reviews.cnet.com/keyboards/logitech-internet-pro-desktop/1707-3134_7-31228942.html link. I don't him is not connected with a USB port THANK U. PLEASE HELP ME!

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Yes, you can open the mouse and clean it to remove any dirt inside.

  Method 2: you can download and install the drivers for the mouse on the manufacturer's Web site and see if the problem is resolved.

  Hope this information helps.

• My wired connection TV does not work.

  I have a Sony Bravia 46 EX720. I tried today to get on netflix, but it says my wired connection failure. I use a router that works properly. When I went to connect to another device, it works fine. However, my TV is not able to use the connection.

  Hi there my name is jeff.i'm having the same problem too .i linked the refresh of internet content but his does not work cos my tv will not let me connect to my internet.

• Internet connection sharing everything just works. Problem really very annoying. Help.

  I have an Internet connection sharing situation. It worked perfectly until I got a little virus. Then, with the CORRECT settings, when I try to turn it on in Vista "allow the other network users to connect through this computer's Internet connection", I get an error message stating "unable to enable shared access. Error 0 x 80004005: unspecified error. "I checked and overchecked. The settings are OK, it's just my computer that has the problem, the other OS I installed (Windows 7) he shares perfectly. It is not material, it's just because of VISTA. What can I do? I searched on the Internet for 5 days and nothing. People seem to encounter this problem, but no answers, or nobody gives one any solution. Can I reinstall just the ICS service? Is this possible? To correct it, a key "reg", a patch, no matter WHAT? It is really really important. I removed all viruses from my computer. Internet works fine on my computer. What can I do? Please, please help me... Please, I beg you.

  Dear engineers,

  I have computer (A) where I use Vista Home edition and I have internet connected with the Ethernet adapter, and I have an another Computer (B) when I want to use internet. I did an adhoc network and connected two computers via wireless adapters, but computer B can not use internet b/c on computer A, I can't start Internet - ICS connection Service. whenever I try to start the service it gives following error;

  "Service ICS (ICS) on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"
  
  Can you please suggest a solution for this.
  Waiting for your response.

  Concerning

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP color laser jet cm1312 mfp sharing does not work

  Hello, I have a problem.
  The this printer to connect to the server (windows 7 32 bit, latest driver).
  Other users (network) may not print, but after restart server, everything works...
  What is my problem? Help, please.

  Hello

  To understand the issue correctly, try the following:

  1. If all the shared PC are not able to print, check if you are able to print from the server PC.

  If print server as PC still work, there will be some communication issue betn the server and the other computer on the network.

  2. If printing from computer Sever also does not work unless you restart the server PC, it might be a problem with the spooler on the server or the printer driver. You can try to reinstall the printer driver and the reshare to PC network and check.

  3. this question could also arise from the printer itself. Tray to update the Firmware of the printer to the latest version and check.

  4. If the driver on the server is offline, try now to turn off the SNMP state:

  From the Windows desktop, select Start, settings, and then click Printers. The icon of the pilot series HP LaserJet XXX, right-click and select the Ports tab, check if the correct network (IP address of the printer) port is enabled in the list of ports, click on the button Configure the Port, in the Port Settings window, uncheck the box next to the option "SNMP status enabled" (disable), click OK to save the settings , click on apply and then click OK to exit the properties of the driver.

  See you soon,.

  Manjit

• photo sharing does not work as it should in the Sierra of the BONE

  I took 11 pictures yesterday, and I want to share only 3 of them. I highlight the 3 photos, click on sharing of arrow, and pictures of 11 highlighted.

  Are your 11 photos recently imported into an album, and id you select in an albumen?

  There has been some reports, selection of photos to change the batch does not work well, when photos were selected anywhere, but in the tab 'Photos' smuggled to the full album can be selected, even if not all photos are highlighted.

  Try, if you can select the photos in a moment to share your photos select only.

• JavaScript in Internet Explorer still does not work

  I followed all the steps of http://community.skype.com/t5/Windows-desktop-client/Solution-for-empty-blank-login-screen/td-p/1008... but still javascript does not work on Internet Explorer 11 (Windows 7, 64-bit, with or without the module running). I even reinstalled Internet Explorer.
  I also added skype.com to trust sites and everything, that must be enabled to allow working active javascript.

  I did the LoginCleanup and it says "System cannot find the path given." and twice "system does not have the given file". (translated from the German by myself, I guess than its counterparts in English)
  
  Well I think that regsvr32 jscript.dll and regsvr32 jscript9.dll worked well in c:\windows\syswow64 and c:\windows\System32, files can be broken (perhaps other software changed). How can I fix this problem without having to download the files of the suspiscous websites?

  Thank you

  Scripts can be disabled by your anti-virus application.

  Now try IE11 uninstalling and reinstalling IE9.

  In order to uninstall IE11 you should go to the Windows Control Panel-> program and features-> view installed updates-> Microsoft Windows-> Internet Explorer 11.

  http://techdows.com/2012/11/how-to-downgrade-from-IE10-to-IE9-or-IE8-Windows-7.html