Internet connection suddenly does not work

Similar Questions

• Internet connection sharing does not work anymore

  I have used Windows Vista Home Premium for 2 years now on my laptop. Internet connection sharing enabled to connect to the internet via my wireless adapter and allowed me to share my internet connection through the ethernet port. He worked for more than a year. All of a sudden 4 months ago Windows Vista doesn't let me share the internet connection more. When I go to networking and sharing Center, click on "Manage network connections" and it shows that my "Wireless Network Connection" is always set to share. So after reading several forums, I clicked on wireless network connections and click right properties. Then I clicked on the sharing tab, to make sure that "Allow other network users to connect through this computer's Internet connection" has been verified and that it is. After that, Windows Vista will not always share the internet. Someone suggested that I double check the IP version 4 and 6 on the wireless and Ethernet connection were defined on IP addresses obtain automatically, and they are. The computer still will not share the internet connection! I even took the manufacturer in the view of portable and made sure my cable modem Simulator wasn't bad. I took it to a computer store and we checked the crossover cable. Everything is fine! What else can I try?

  Obtain an IP address automatically is the wrong setting on the Ethernet connection.  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  DNS server: no
    
  Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• internet connection wifi does not work after entering safe mode

  It works when I connect it to the router with cable, I had this problem before & there was a command typed in cmd that solved but I can't remember it, any help?

  Interesting... If you have booted without failure then you restarted in normal mode and your wireless settings no longer work?

  UH... Well the first thing I would do is to disable and reactivate my wireless card.  The second thing I would do is check I get an IP address on my wireless network, this is done in the command line (cmd) by typing "ipconfig".  If you get an IP address then you know that your router works on the dhcp protocol, but to confirm I would ping the router, which will be your entry door, which is usually something like "ping 192.168.1.1".  If you do not have an IP address, you should try to renew and see if you can buy a... "ipconfig / renew".

  In addition, you will need to check that you are actually connected to a wireless network, it should appear in your software wireless windows, or you proprietary wireless NETWORK card software.

• Canvio connect II does not work on Mac

  I have a canvio connect II and I had to format it because Windows 7 does not recognize, I did said Toshiba, for formatting so that the hard disk has unit. I formatted with NTFS and my problem is when I connect my Mac hard drive, I can't save anything, I can't make a backup... Then my canvio connect II does not work in my Mac.
  How can I put all the software that had my hard drive? Where can I download them? How to install?

  Thank you!
  Alberto.

  I saw in the toshiba tutorial this hard drive driver "Tuxera NTFS for Mac" it allows to read and write data in Mac and Windows, how can I get this driver?

• Option Internet PCI card does not work

  Last week I had format my Satellite and I had installed Windows 7, 64-bit, but now the Internet PCI card does not work.

  It says that my Radio power is off, even if in reality is not.

  I had the same card for Windows 7 Version, but unfortunately Internet update for nothing.

  Please can you help me.

  Thanks in advance

  Can you please tell us which model of laptop you have exactly?

• BlackBerry AutoText on Q5 Q5 suddenly does not work

  I have a problem on autotext @ my Q5. He is suddenly does not work. All the words that I recorded on my word substitution will not appear on my BBM. My OS: 10.1.0.4181.

  Can any body give a solution? Thank you

  No, my word substitution list is not empty, where is full. I already solved it by myself. It seems that we can only put Word Limited. So after that I deleted some of my word, inserts rerun. I think it is a bug for the Q5. Maybe we can only place max 80 words.

• Logitech Internet Pro mouse does not work well.

  I have a Logitech Internet Pro muse and his does not work well since last month. Maybe I should clean a tell me please to open this optical mouse to clean or may be a virus is there or Spring does not work. The model information is on the http://reviews.cnet.com/keyboards/logitech-internet-pro-desktop/1707-3134_7-31228942.html link. I don't him is not connected with a USB port THANK U. PLEASE HELP ME!

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Yes, you can open the mouse and clean it to remove any dirt inside.

  Method 2: you can download and install the drivers for the mouse on the manufacturer's Web site and see if the problem is resolved.

  Hope this information helps.

• My wired connection TV does not work.

  I have a Sony Bravia 46 EX720. I tried today to get on netflix, but it says my wired connection failure. I use a router that works properly. When I went to connect to another device, it works fine. However, my TV is not able to use the connection.

  Hi there my name is jeff.i'm having the same problem too .i linked the refresh of internet content but his does not work cos my tv will not let me connect to my internet.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• JavaScript in Internet Explorer still does not work

  I followed all the steps of http://community.skype.com/t5/Windows-desktop-client/Solution-for-empty-blank-login-screen/td-p/1008... but still javascript does not work on Internet Explorer 11 (Windows 7, 64-bit, with or without the module running). I even reinstalled Internet Explorer.
  I also added skype.com to trust sites and everything, that must be enabled to allow working active javascript.

  I did the LoginCleanup and it says "System cannot find the path given." and twice "system does not have the given file". (translated from the German by myself, I guess than its counterparts in English)
  
  Well I think that regsvr32 jscript.dll and regsvr32 jscript9.dll worked well in c:\windows\syswow64 and c:\windows\System32, files can be broken (perhaps other software changed). How can I fix this problem without having to download the files of the suspiscous websites?

  Thank you

  Scripts can be disabled by your anti-virus application.

  Now try IE11 uninstalling and reinstalling IE9.

  In order to uninstall IE11 you should go to the Windows Control Panel-> program and features-> view installed updates-> Microsoft Windows-> Internet Explorer 11.

  http://techdows.com/2012/11/how-to-downgrade-from-IE10-to-IE9-or-IE8-Windows-7.html

• iPhone 6s and carplay connected but does not work

  It has worked before and now does not. I deleted the system carplay phone and indicated above. The iPhone says bluetooth is connected to carplay and carplay indicates it is connected to the iPhone, but it does not work properly. I can't get or receive calls. I hear the phone ring on incoming calls by speakers in the system several times and when I touch the phone button my steering wheel to answer does not work, or it shows the phone number entering on the radio screen. When I try to make a call, the iPhone does not, I call say they have heard their phones ring but could not hear me speak, phones sounds dead on both ends. I have to disconnect carplay to make and receive calls.

  As side note my iPhone and carplay work with audio for listening to music, but who also has been removed from carplay so that I can put in place the phone carplay only system.

  Any suggestion would be appreciated.

  Concerning

  Steve

  Nevermind, I figured it. I completely turned off the iPhone and he turned his back, and then just followed the car game voice instructions to synchronize.

• Config Free - Connectivity Doctor does not work correctly

  Hi all

  yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...

  The details are
  AppName: cfmain.exe AppVer: 5.0.0.119 ModName: venapi.dll
  ModVer: 5.0.0.3 Offset: 000034df

  Thank you very much for your support

  I found this:
  cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.

  Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility

• Tecra M2 suddenly does not work with power supply

  Hello

  Suddenly my laptop does not work with power... (with the battery, that it works very well)

  The power supply works fine.

  Someone at - it an idea for this error?

  Winni

  Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

• Touchpad suddenly does not work

  I have a Compaq Presario CQ56-202 and suddenly while making a comment in a thread on FB one (very briefly) saw a flash symbol... something with a red on X. It is so short that I didn't have a chance to really see what it was. Have never seen him before. Then I noticed a small red light on the touchpad, and now the touchpad does not work. The mouse works fine.

  Someone at - he a clue as to what happened? What can I do to get it working again?

  Number 1 in this photo shows the area of tap to toggle the touchpad on some models. Have you this?

  http://support.HP.com/us-en/document/c01983909

• Printer now installed Internet Explorer 9 does not work error in script line 2107

  I installed Internet Explorer 9, now my printer does not work on the internet.  I get a message saying the following:

  "An error has occurred in the sript on this page."

  Line: 2107

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dill/preview.js

  Help, please!

  TammyRobbins,

  Try to read...

  You cannot print or preview before printing a Web page in Internet Explorer 9

  Rick