Internet connection Windows xp missing device manager local of system restore won't work

Similar Questions

• System Restore won't work, drives available: HP (C :) (Missing)?) Left click on the mouse also stops randomly works, works fine in safe mode.

  My computer is upward, slow-running and my mouse will just randomly stop left click. I can switch the service so click right not left click function, but then cannot do the right click function. I had created a restore point before installing a program called Cain and Abel on my computer and it was just a couple of days.

  When I tried to do a restore, I got a message saying I needed turn the system restore. Then my computer froze so I restarted it and selected "System Recovery" and tried to do a restore to the point that I had created before that Cain has been installed. I got a message saying that the restoration has failed then I restarted mode without failure. When I restarted in safe mode, both left and right click was working again but I got a message saying that something has been altered (I didn't write it down so you do not know what it was). He says to run CHKDSK, which I did and then the computer seemed to work again.

  This is temporary, I lost my left click again and now have swung it for do the right click, left click is supposed to do, but really need to be able to do both types of clicks.

  I go in to the restoration of the system, and it says I need to turn it on. When I go into system properties to turn on, the disc I want to activate to says "HP (C :) (Missing)) ' what this means and how do I do the restore point I have created 2 days ago from work?

  Hi kar fam.

  The question you posted seems to be hardware related. Unfortunately, we are unable to help with changes to the hardware. For more assistance, contact your computer manufacturer.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• Question: How to avoid the pop-up "Welcome to the Windows Live (tm) Device Manager download"?

  I also use many Office Communicator 2007 and Live Messenger and Live Photo Gallery. My PC (Win XP SP2) office also has a LX-3000 headset and a webcam VX-6000, both are for use with Office Communicator.
  Since a recent update, whenever I connect a device, a "Welcome to the Windows Live (tm) Device Manager download" window asking me to download Windows Live Device Manager.
  However, on this desktop PC, I don't want that to be installed. Also, since the shape a previous download, I learned that this device manager does not recognize Office Communicator; It assumes that Live Messenger.
  How can I stop this pop up on my desktop PC?

  Hello Wytze_,

  Thank you for your message.  Let's try turning off the pop-up.
  If you have Windows Live Messenger 2009:

  1. click on tools, select Options

  2. click on the connection tab

  3. uncheck the show Windows Live today after I connect to mailbox

  For older versions:

  1. click on tools, select Options

  2. click on the general tab

  3. uncheck the show Windows Live today after I connect to mailbox

  There were a few discussions where people indicated that they downloaded Device Manager but then turned off to avoid the messages.  As seen HERE.

  If none of these suggestions help to solve the problem, you can visit the Windows Live related forum HERE.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Internet connectivity icon is missing from the system tray.

  I run Vista Home Premium SP2. My internet connectivity icon is missing from the system tray. How can I restore it? Thank you.

  Hello

  This should help you.

  If method 1 is not available to you, use method 3:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  See you soon.

• System Restore does not work in windows 7? not even in administrator mode

  WINDOWS 7 IS MY OS. AM NOT ABLE TO RUN THE SYSTEM RESTORE. HE IS THERE A NO RESPONSE AFTER I SELECTED THE SYSTEM RESTORE SEVERAL TIMES.

  Sushant salvation,

  To help you better, please answer these questions.

  1 you get a specific error message?

  2. you try to restore the computer to an earlier time?

  3. you try to create a restore point?

  4 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Try to perform a system restore, safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to perform the system restore in safe mode, I suggest you perform the clean boot and check that there could be some third-party application that may be causing the problem.

  Step 2:

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 of the link to start the computer to a Normal startup mode.

  Important: If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point, if any.

  Undo system restore

  http://Windows.Microsoft.com/en-in/Windows7/undo-system-restore

  Method 2

  You can also try temporarily disabling computer security software and check if it makes a difference. If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, perform the restore from Winre system.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help you.

• Envy of HP dv7-7332ea - System Restore does not work on windows 8

  Hey there,

  I recently bought this machine about a month ago. I used the Windows 8 System Restore feature to restore my pc to a previous state.

  However, after running it, I got a message saying: it failed and to ensure my anti virus is disabled. Accordingly, I have disabled Norton and tried again but it still does not work.

  Previously, the only problem I had with the pc was that he locked himself completely and therefore I turned off the machine that I have been unable to close.

  When I rebooted, HP Support Assistant could not run and so I uninstalled and then reinstalled from website theHP. It is now resolved. The thing is I'm a little scared that something is wrong with the machine that is the reason why I think that the system restore does not work.

  I'm a newbie on the computers here. Could you please give me some advice to diagnose if there is nothing wrong with my machine and fix the system restore?

  See you soon,.

  Damon

  Hi Damon,

  Norton is a component called 'Tamper Protection' that should be disabled before a system restore can be performed - for more details on this topic, see the following link.

  Disable self-protection.

  Kind regards

  DP - K

• System Restore does not work on my Windows 7 computer

  System Restore does not work for me on Windows 7 pro, he returns with a cancellation but does not either.  I have load a movie in movie maker and all the trouble started.  I couldn't finish the loading of the movie at that point, I started to have problems with the operation of windows.  End result, I tried restoring the system without success...

  Hello

  1 are you getting any error code or error message?

  2. have you successfullyperform before system restore?

  3. have you made any change before this problem?

  I would suggest trying the following steps and check if it helps.

  Step 1: search for errors in the event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 2: check if you are able to save the clean boot.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Step 3: security software temporarily disable and check if it helps.

  Disable the anti-virus software in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: After reviewing the matter, must reactivate the security on your computer program

  Also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Sebastian M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is the warranty of my internet connection Windows 7 undermined by having my local network Windows XP connected with off ICS?

  My Windows 7 connects to internet via my Android phone - sometimes using WiFi Hotspot of the phone and sometimes by direct USB connection between them.

  My Windows XP is often connected to my Windows 7 in a LAN network two computers [no router involved] or the Ad Hoc WiFi connection.  Internet connection sharing is off in Windows 7 so that Windows XP can not connect via the internet.

  Currently, I disconnect the two computers when the Windows 7 to go on internet.  Am I being too conservative?  Could I just leave the two computers when Windows 7 is on the internet, given that ICS is off?

  [modified to improve clarity 23 Sep 2014]

  Hello

  Sorry for the late reply. I wish to inform you that hackers cannot attack your computer if Internet connection sharing is disabled on the computer. No one can access your computer while you are connected to an active internet connection.

  Please post back if you have problems related to Windows and we will be happy to help you further.

• A Wi - Fi (Wireless LAN) connection is disabled in Device Manager

  The laptop is HP Pavilion G4 running Windows 7 Ultimate (64 bit).

  I just re - install my laptop Windows 7 Home Premium (64-bit) for Windows 7 Ultimate (64 bit).

  But I just realized that there is no "HP Connection Manager", so I downloaded it from the internet.

  When I turned on the wifi of "HP Connection Manager", he says "Wi - Fi (Wireless LAN) is disabled by the Device Manager".

  What should I do next?

  Thank you!

  Hello:

  You will probably need to install the driver for the wireless card there.

  If you see a device network controller listed in the Manager of devices, then you certainly need to install the driver for the wireless card model that your laptop uses wireless.

• Content window display/reduce Device Manager

  I thinnk I messed up my husband's computer.  It is an ACER Aspire one.  I didn't know what I was doing when I chose "install MTP driver" I don't have a device connected.  The material of the bubble disappear, but Device Manager is the cause of problems.  When I open the Device Manager, the content appears, but when I move in the window choose an element, the list collapses (not window).  It continues if the cursor is inside or outside the window.  It seems to be rhythmic in the calendar.  I can't click on anything.  I'm trying to figure out what to do.  Help!

  This is a great time to try a system restore to before you install the driver "PSG". Start > programs > Accessories > system tools > system restore. Follow the instructions in the wizard. MS - MVP - Elephant Boy computers - don't panic!

• Director of office of blackBerry Smartphones no connection BB recognition despite Device Manager recognizing the BB!

  I'm turning crazy connection.

  I installed desktop manager 4.6 provided on the CD, as the user guide says. I connected the cable between my BB 8220 pearl.

  The BB asks me if I want to turn Mode mass storage and I clicked 'YES '.

  Explorer Windows allows me to view the contents of the phone.

  BB Device Manager tells me that "" USB - PIN: xxxx is connected ".

  YET in the Desktop Manager software on the upper left corner, it says 'Disconnect' and on the lower left corner, it says: "Device Connected (PIN): No.

  Does anyone know why the BB device manager says the BB is connected by software office says the opposite?

  I have tried everything to uninstall for re - install desktop Manager and also pass the phone power on and off.

  Help, please! Someone!

  Hi and welcome to the Forums!

  See this KB for assistance troubleshooting:

  • KB02640 Troubleshooting USB connections
    KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    KB00019 PIN code not displayed in BlackBerry Desktop Redirector

  I hope that something will be useful.

• I can connect to the router but no internet connect windows 8

  I took each of boredom that my NEW HP envy provides however I still get a no internet connect error.  If I reset my router and checked that it is acceptable.  I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!

  Hello

  Check with HP Support, their online documentation and drivers, diagnostics,
  and ask questions in the forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===============================================

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite 1100 - DVD disc in the missing device manager

  My DVD Rom drive seems to have disappeared from my device manager. System will not read or write any DVD/CD.

  How to restore the disc without using the recovery disk? (That won't work because the drive does not work)

  Hello

  First of all, you should check if the BIOS can recognize the CD/DVD drive.
  If the BIOS does not recognize the drive maybe the pin connection is loose or the disk is damaged.
  If you have experience in laptop computers, you can check the connection of the PIN. Try to remove the disc and then start Notepad. After close connect the player again in the Bay and start the unit.

  Check again if the drive appears in Device Manager. If he doesn t appear I guess that it s a hardware malfunction, and you need a new.

• Custom development of modules CompactRIO - Embedded window of "missing" project manager

  Hello!

  The scenario:

  I am currently working on a custom CompactRIO Module. The material is made for the most part, I installed CompactRIO MDK 1.0 and I want to configure my CompactRIO system and develop the driver VI for my module.

  The steps required to configure the cRIO system before you start developing the pilot VI is the following (as mentioned in the documentation of MDK):

  1. launch LabView and select as an execution target FPGA devices. The Embedded project manager window will appear.

  2. Select the file-> New and create a project (LEP) LabView Embedded file.

  3. ...

  Used equipment:

  -LabView 2011, a Student Edition license

  -LabView FPGA and real-time modules

  -NIRIO 4.0

  OR-CRIO9024 controller with 8-slot chassis

  The problem:

  After the launch of LabView and selecting FPGA as a target (see figure), even by pressing the "Go" button next to the slide in the menu window of Embedded project manager will not appear.

  I also tried searching in other menus, without success.

  Issues related to the:

  1. where can I find the Embedded project manager?

  2 is it possible, that I can't find the window of Embedded project manager because I have a student licensed LabView?

  3. How can I create a LEP file in this case?

  4. can I use (and if so, how?) the option "create a pilot instrument? (see the attached figure)

  Waiting for answers,

  Levi

  Hello!

  After some research, I managed to create the link between my custom cRIO module and LabView.

  The complete solution (with LabView 2011):

  -Add the line "cRIO_FavoriteBrand = generic ' in the file LabView.INI"

  -Launch LabView

  -creation of a vacuum of the project and select FPGA execution target, click OK

  -Select 'CompactRIO Reconfigurable Embedded System' as the project type, click Next

  -the next step is the detection of the chassis / modules, followed by the creation of the new FPGA project

  -Add the custom module: click right on the target FPGA-> New-> C Series-> new target Modules or peripheral-> series C Module-> OK

  -Enter the name, select 'generic' module type, enter the location

  Hope it helps someone someday.

  Levi