Internet Explorer and games does not start; no error message.

Hi, I had a lot of problems with my computer lately, and it's the last that I have not been able to solve.  I'm running the 64 bit version of Windows 7 Home Premium in a computer, I implemented last summer (the motherboard is an ASUS P5N - D for details).  I recently decided to bathe my HDD Seagate on fire right through a "boot and nuke" program, hoping to relieve a massive corruption of Windows file.  I had a few difficulties, reinstallation of Windows through my installation disc - is now on his third relocation, because I found myself in the limbo of the repair to start due to corrupted registry errors the first two times (although Windows went perfectly fine as a first step, the problem is presented when you restart).  On the last installation, I could run long enough to reacquire all my drivers through the internet, and I even managed to install and play a game for a while.

When I turned off my computer had 53 updates to Windows Installer.  Let them install and when I started it this morning, Windows wouldn't start.  I used the system restore, Windows and then stop again updates give a chance more (I think that they have perhaps been interrupted the first time).  Now, Windows starts correctly, but I can't run my game.  More worrying is that I can't run internet explore.  I tried MS Paint and Windows Media Player and both of these applications are running.  But in the two aforementioned applications, the pointer changes to indicate they're loading a moment and then returns to its normal appearance without loading anything or provide an unique error message.  I opened the Task Manager and watched list applications that I began them - both appear in the handler for a fraction of a second before disappearing without warning.  I have no idea what is the cause and would be very grateful some advice thereon before yielding to frustration and buy a new hard drive.  Thank you.

Go, I found to open the newspaper is to copy on your desktop (for this, you will need the Admin password) then right click to copy file and 'open with '. Use an editor, I think that the default value in the list is Notepad. Uncheck "always use" that you can't always open these log files in Notepad.

The problem is that they are not so easy to decipher.

Have a read of http://support.microsoft.com/kb/929833, this http://support.microsoft.com/kb/928228 (for Vista but should give an idea) and http://www.sevenforums.com/general-discussion/56234-make-cbs-log-useable.html to give an idea.

The "SFC / verifyonly" does what it says, it does and just detects and reports errors through the newspaper. You can run the command to actually verify and repair errors, but to be honest, I don't know enough about the in's and out of it. I guess it must fix the errors it finds, but I am not sure if there are disadvantages to it. Experts from the SFC SC around?

I don't think that an information event is usually nothing to worry about, its errors and warnings that can give advice to any potential problems. If you open the error/warning message there is sometimes a link goes to MS who occasionally provides assistance on what to do next. Then click on one of the errors and look for the 'more information' link.

Have you tried 3, 5, 6 of my first post, & Esp 5. It is possible that your user account is 'pickled :-) ". "rather than the whole system and creating a new test user all might be fine." It is not certain or guaranteed, but shouldn't take long to check.

It seems that something is damaged somewhere, so maybe try something else is a check disk scan. Open Explorer, right-click your HDs (one at a time), tools, and then click "error checking".

EDIT - one think more away, you have an AV Checker updated running? Start in safe mode with networking, the errors still occur then (i.e. can you open IE now)? Once in safe mode, see if you can update your AV checker and run a full scan.

Tags: Windows

Similar Questions

  • Firefox does not start, no error message, only works in the background

    I click on Firefox it does not start
    no error message it does not start
    It works in the background in 32-bit
    I have re installed it but nothing changes

    It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • Lightroom does not start. no error message. Task Manager indicates it gets up to about 75 k and disappears.

    My lightroom does not start. dies just before the banner.

    Please visit: http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/the-program-cant-start-because-msvcr110dll-is/f052d325-3af9-4ae5-990b-b080799724db

    Kind regards

    Mohit

  • After the upgrade to firefox 9.0 does not start. Error message says mozcrt19.dll is missing.

    Runnng Windows 7 Firefox anf 6. Updated to 9.0. Error message says try to reinstall to fix the problem. Have tried without success. Uninstalled all the programs Firefox and installed a cleaning with the same error message that appears when I tried to start.

    I had finally fixed it by uninstalling firefox and closing of my alarm box antivirus program, and then do a clean install.

  • I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

    I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

    Hello

    1. what happens when you try to start the game?
    2. do you have messages or error codes?

    Follow the steps in the article mentioned below and check if this solves the problem.

    Known graphics issues in Rise of Nations
    http://support.Microsoft.com/kb/820089

  • Windows 7 build in windows game does not start

    Windows 7 build in windows game does not start

    Hello

    ·         What happens when you try to start the game?

    ·         You get the error message?

    Try this:

    a. go to start and in the search type 'Turn Windows has or not'.

    b. click on "Turn Windows features on or off".

    c. find the games and place a check in the option of games. Click OK

    d. restart the computer

    For more information, see the article below:

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Connected to the Internet, but Internet Explorer and Firefox do not work.

    So this happened for a few days now and I have no idea what to do.  My internet explorer and firefox do not work, but I don't know that I'm connected to the internet.  I have reset the router, tried to use internet explore (no add-on) and still nothing works.  My girlfriends computer connects to firefox, but mine does not.  Any advice will be otherwise I give up on the building of the internet.

    Hello, Harrison

    Do you have any other security software installed previously?

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Automatic update failed, and Windows does not start

    I am running Windows 7 and it does not start. Automatic update started as soon as my computer is awakened from his sleep. It closed several programs. The update had completed 30% when he stopped to restart the computer. As windows began, I got a blue screen message telling me that it didn't start. I tried to restore the system at two different times, but both failed. I'm not sure that I can do.

    How do access you the system restore?
    If through the repair of this selection of the computer in the Safe Mode menu - have you tried to use the Safe Mode?  If so, what happened?

    While waiting for a response, please try these free diagnostics, bootable: http://www.carrona.org/initdiag.html

  • My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

    Hello

    Looks like a hardware failure.

    Try to reinstall the operating system:

    It comes to the use of the Asus restore procedure.

    http://www.ASUS.com/support/FAQ/1006133/

    See you soon.

  • Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

    Hello

    I still have the "system error 1068. The dependency service or group was able to start.

    "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

    I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

    I tried "restart the spooler to print the title of the services, it does not, with the error message above.

    I have check the dependencies and it say HTTP and RPC

    I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

    I went to regedit and found the keys as follows I don't know if its correct:

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

    'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

    "Group"="SpoolerGroup."

    "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

    74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

    00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

    'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

    "LocalSystem ObjectName"=""

    "ErrorControl" = DWORD: 00000001

    "Start" =: 00000002

    'Type' = dword:00000110

    "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

    70,00,00,00,00,00

    "ServiceSidType" = DWORD: 00000001

    "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

    00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

    72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

    00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

    72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

    00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

    69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

    00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

    6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

    00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

    50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

    "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

    00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00


    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

    "Close" ="PerfClose."

    "Collect"="PerfCollect."

    "Collect Timeout" = dword:000007 d 0

    "Library"="winspool.drv".

    "Object list"="1450".

    "Open" = "PerfOpen."

    "Open Timeout" = dword:00000fa0


    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

    "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

    00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

    00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

    05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

    20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

    01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

    I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

    Any other advice would be greatly appreciated...

    Hello yan_dao69,

    I suggest that you try the methods below to solve the problem.

    Method 1:

    I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Ideally, this would set the print spooler service issues.

    Method 2:

    I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

    http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

    Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

    Method 3:

    Check the dependency of the spooler services in the registry.

    a. Click Start, type regedit in the search box and press ENTER.

    b. look for, and then click the following registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

    c. right-click on spooler, click Export, save a backup file on your desktop.

    NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

    d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

    e. in the value data box, delete the other keys and then click OK.

    f. exit the registry editor.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Computer Dell laptop, OS preinstalled Windows 7 does not start. Error: PXE - E61

    Original title: Failure to Boot to

    Computer laptop Dell, OS of Windows 7 pre-installed. No disc restoration/reformat/install for 7. (This is bullcrap if you ask me). Does not start. Error: PXE - E61: Media test failure, check cable PXE - M0F: out Broadcom PXE - ROM

    What should I do here?

    See if there is a solution here: http://hubpages.com/hub/How-to-Solve-PXE-E61-Media-test-failure-Check-cable-Error

    J W Stuart: http://www.pagestart.com

  • cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

    cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

    I just replaced my 9.5 Raw camera with Camera Raw 9.4, from this page:

    Camera Raw installation of Adobe Photoshop CC and CS6 program

    It worked, now I'm back in business!

    PS. along the way, I installed Camera Raw 8.3 (manual drag-and - déposer), in response to advice on a pretty old thread, and that worked as well.

  • 6 Lightroom will not create a catalog and therefore does not start

    Installed 6 Lightroom on a Windows 8.1 System. Provided with a serial number, but he complained that I need Internet access. Internet worked very well, so I chose to connect later. That is at least 8 times. Now when I try to run, the icon appears on the taskbar but it stalls. When I hover over the icon it shows a thumbnail of the screen to create a new catalog, but it will never develop the screen. The only option I have is to close the small window with a right-click. Then I start again and it's the same - no possibility to start Lightroom even after a reboot, then a re - install! Can not yet return to the fake my serial number validation attempt.

    I decided on a variation of your suggestion. I uninstalled and then download the latest version of Adobe's CC. However, the same problem persists. So, it was now time for some lateral thinking! Since the start-up became not even the creation of Catalog screen, I thought something was wrong there. So I grabbed a laptop, installed Lightroom and then copied the file Pictures\Lightroom on my desktop PC. It worked! Now Lightroom works well. I have to do is enter my serial number and it does not look back

  • I get this error message and Firefox does not start... EXC in ev handl: error: error definition property on NPObject!

    Firefox does not start and this message keeps coming back... I uninstalled and reinstalled... but nothing helped...

    EXC in ev handl: error: error definition property on NPObject!

    Disable the extension "McAfee Site Advisor" who has just updated 3.4.0 that probably out of block of addons list.

    • 'Ctrl + Shift + A' > find McAfee Site Advisor and use 'Disable', and then restart Firefox.
    • Do a Google search without problem
    • It seems that if you re - enable new Site Advisor and restart Firefox you agree. At least you know where to look if you get the error again, or research on Google to slow down.
  • Portege M800 - noise and HWSetup does not start

    Hello

    I use a Portege M800-116 under XP - SP3.

    Problem 1:
    Connection Line-Out to a stereo system and play music with Winamp or WinMediaPlayer works fine on battery.
    As soon as I connect the power adapter, a whistle loud high frequency and UM static disrupts the experience.

    Problem 2:
    Files WAV or MP3 recording with internal or external microphone produce mediocre results.
    The resulting files include a high level of high frequency noise and hum static.
    Connect the power supply increases the problem.

    Comparing the quality of the recording and playback with my old confidence Portege M100:
    My M800 is one not only of poor quality - it's plain unusable.

    Problem 3:
    Toshiba HWSetup does not start from the control panel.
    Have you tried the ONU - and re - installing nothing helps.

    Thank you for guiding me towards a solution.

    Concerning
    T

    Hi, fly,

    I m not Portege M800 owner so I can t he test for you, but I think that if the problem occurs only when the AC adapter is connected, it s a grounding problem

    You have 3-pin or 2-pin AC/DC adapter?
    As far as I know in this case you need 3-pin AC/DC adapter and power cord.

    You should ask an ASP in your country. Guys can order a new AC/DC adapter and check your laptop to what the problem is exactly.

Maybe you are looking for