Internet Explorer does not open on the computer running Vista

Similar Questions

• Internet Explorer does not open on my computer

  Hello
  Internet Explorer will not open on my computer.
  Everything is ok with my internet service and the resolution of problems, says everything is good.
  What can I do?

  Hello

  1. what happens when you open Internet Explorer?

  2. you get any error message?

  3. were there any changes made to the computer before the show?

  If you cannot open Internet Explorer or if it opens briefly and then closes, the problem may be caused by lack of memory or corrupt or missing system files. Restart the computer to clear the memory and then open Internet Explorer.

  Please follow the steps from the link and check that it works very well.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-problems-with-Internet-Explorer

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Internet Explorer does not open in the metro interface

  My IE does not open in the metro interface. This is my default browser & I disabled all add-ons. What can I do now?

   

  Hi Wendy,.

  I understand that you can access the modern user, Internet Explorer interface, but desktop Internet Explorer works fine. To better understand the question, please answer the following questions:

  (1) what exactly happens when you try to open Internet Explorer to the modern user interface?

  (2) has received no message/error code?

  (3) what are the changes to the system prior to the question?

  (4) you are able to access other applications for the splash screen?
   
  (5) you are able to launch the desktop Internet explore?
   
   
   

  Method: Please delete the following registry key

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.

  (a) go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_DLLs

  (b) delete the value: (C:\PROGRA~2\WI3C8A~1\Datamngr\datamngr.dll C:\PROGRA~2\WI3C8A~1\Datamngr\x64\IEBHO.dll)

  (c) reboot and retry launch browser IE10 Immersive

  Important: Serious problems can occur if you modify the registry incorrectly. For added protection, back up the registry before you edit it.

  Back up the registry:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
   
   
   

  Hope it solves the problem, if you have other questions about Windows, feel free to post.

• The homepage of Internet Explore does not open on my pc.

  Original post: the homepage of Internet Explore does not open on my pc. Please do what shouldi?

  When I open internet explore it displays the message: internet explore cannot display the Web page. If I type however in another web application example for my mail or any site at all, this will be displayed. But once I finished the task and retirement to IE, confronted again im the ugly message. Olease what I do?

  You can set the page Internet Explorer opens with for what you want and it looks like you can have inadvertently set it to a page that does not exist or is no longer valid.  You can navigate to any page you want to be your home page, then use the following instructions for the "Current use" layout: http://windows.microsoft.com/en-US/windows7/Change-your-Internet-Explorer-9-home-page

• Internet Explorer does not open

  I got an eMachine who was 'slow' that my client wanted cleaned and accelerated. It is Vista Home Basic (without Service Pack yet) and has two users, an administrator and a Standard. Antivirus is Norton. The reason why it has been slow is that she only had installed 512 MB of Ram and a part of which was used by the video. The only spy/advertising software he had was about 250 cases of MyWebSearch which I cleaned. I added just an another 512 MB of ram and has greatly improved the speed. The only problem I have now is that Internet Explorer does not open in a user account. It appears in the Task Manager. If I try to run again, it will show a second instance in Task Manager. He just will not come to the top. The customer has Firefox installed and works well. I called her and she confirmed that IE had not worked. What should I look for?

  Service Pack 2 cured it. I think that SP 2 updated IE 7 to 8. I never could see what was originally in it because it does not open. But it's IE 8 now.

• Computer is slow, Internet Explore does not open pages.

  Original title: let a friend use computer, now runs slowly, lock up web pages or does not load?

  As stated previously, I took my computer to my friend. Now, it is extremely slow at startup and Internet Explorer will not open pages, or if not that they lock up Afterwords. I installed Avira, but removed, now have Avast and Advanced System Care. After analyses of them they tell me, found no virus. I even tried to re - load Windows Service Pack 2 for Windows Vista Home, but she wouldn't because she is already mounted. Help, please! I am in desperate need of having this problem is resolved.

  Hello
   
  What version of Internet Explore do you use?
   
  See the methods mentioned below and check if that helps.
   
  Method 1:
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/
   
  Method 2:
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance
   
  Method 3:
  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
  Method 4:
  How to optimize Internet Explorer
  http://support.Microsoft.com/kb/936213/ro
  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
  Hope this information helps.

• By clicking on the icon of Internet Explorer does not open that is to say, don't copy icon on the desktop. No other icon has this problem.

  I had to repair Windows XP after the failure of my diet.  After you install the updates, the icon of IE on the desktop looks different (a kind of a blue thing behind him) and when I double click on it, it does not open the program, it copies the icon again on the desktop.  Double click the icon of any functioning normally by opening the associated program.

  Download from here and start installation

  http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx

• Re: Satellite L500 - Internet Explorer does not open

  Hello

  I have a Satellite L500, which is new with Windows 7 home premium configured.

  When I connected for the first time, everything worked perfectly and I was able to browse the internet. After closing, the next day I tried to connect and I tried to open IE, I wasn't able to open IE. IE does not open. In addition, Windows media player will also not open.

  I got once more Windows 7. But the foregoing happens again.

  Someone help me please as soon as POSSIBLE.

  Kind regards
  Anoop

  Hello

  You get an error message if you try to open Internet Explorer or nothing happens to you?

  Have you also tried another browser like Firefox? Check this box!

  Normally with the settings everything should work properly. Have you installed a software after Windows 7 recovery?
  Did you use HARD drive recovery, or how exactly to get Windows 7?

• Internet Explorer does not allow my program to run.

  I have the Foscam wireless camera setup to display on my computer.  I now watch on a Mac.  I just bought the HP Pavilion Entertainment PC.   When I try to run Internet Explorer will not allow him to start.  It has something to do with the certificates of the program. He was down to install activeX.  I click on install and the program still does not work.   What I would do.   I use dyndns.org as the host of the show.

  Thank you.

  PS: If I use Firefox I can view a camera at a time.  With IE, I should be able to view both.  I use IE at work, and it works.  Some thing on this PC it blocks and I can't understand it.

  Thanks again.

  I finally have success.   I searched online and found the following.   It is in fact of Foscam.   A simple click on the Advanced tab and it worked.    Thank you for leading me to search online for details of Foscam.  I hope that if someone is having the same problem that they check here.   Before I was just checking the custom section.  But it's the Advanced tab.

  You have been very helpful.  I appreciate your time spent on it.

  Thank you

  If your using Internet Explorer 8 or 9, follow these steps:
  
  1. open Internet Explorer 9-> click Tools-> Internet Options
  
  2. click on the Advanced tab-> find the Security section
  
  3 activate (check) allow software to run or install even if the signature is not valid

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• When I open a web page that has a PDF file a pop up appears saying that Internet Explorer does not work.

  When I open a web page that has a PDF file a pop up appears saying: internet Explorer does not work. I use to open the web page before and was able to look at the PDF file. What can I do to solve this problem.

  original title: PDF files

  Go to http://www.adobe.com and download the Acrobat reader software.  If you still have problems, you can use the Firefox browser which you can download from http://mozilla.org .

  Good luck.

• Internet Explorer does not then that kept idle for awhile... How to fix?

  Original title:

  IE 8 sometimes does not open to the internet

  When I leave internet and try to open ie 8 there are times that the only way I can come back on is to restart my computer and then IE 8 works fine. I have mozilla firefox but my printer doesn't and lt said my ip address iwrong and will not be printed. I really just want to use ie 8 without these problems! Help!

  Thank you

  Sheldon

  Hello

  1. have there been recent changes to the system before the show?

  Method 1:

  Follow the link below, perform the steps and check if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the link below, perform the steps and check if it helps.

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Important Before you follow the steps in the "Reset the Winsock protocol" section, we recommend that you use the System Restore tool in Windows Vista to create a restore point on the computer. This will allow you to roll back the computer to the point in time before that all changes have been made in the event that these changes create new problems.

  For reference:

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Let us know if it helps.

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Help, INternet explorer does not work after windows update

  One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
   
  After installation, my INternet explorer does not work.

  It reads:

  Windows could not access 'ie.redirect.hp.com '.
  Windows received an HTTP error message: 403 (refused).
  -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

  Then I click ok, and then try to go on 'www.google.com '.
  It still does not work, so I click on diagnose connection problems
  This time, it reads:

  Windows not found no problem with the network connection on this computer.

  You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
  Send information

  But when I send, I can not because I have Canon go online on my Internet Explore.
  When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

  I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

  I tried everything, but I can not do it by myself, so help please!

  @ceda only: See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft