Internet has been disconnected by Wi - Fi

Similar Questions

• Updated Firefox to update automatically so that the internet has been disconnected, and now it's showing I updated Firefox. What should I do?

  I started Firefox even if the internet has been disconnected. But before opening, Firefox updated automatically, not advising me that I was disconnected. It shows now that I have the newest version of Firefox. What should I do?
  Operating system: Windows XP Professional Service Pack 2.

  He's going to have downloaded the update while you were connected and the next time you start Firefox, it will have installed upgrading if you were connected or not.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• the device has been disconnected or is not available

  I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

  Help, please!

  Currently, my version of the MacBook has been OS X 1 10.11.4

  its MacBook Pro OS X 10.11.4

• HEX 0x8BBB0011 as the connection to the server has been disconnected

  Hello

  I use a shared variable of the network to control a loop in FPGA in cRIO 9073. 1 for a month, the program was runing without any problem, but suddenly, the VI is thrwoing an error

  "HEX 0x8BBB0011 connection to the server has been disconnected.

  The error or warning occureed while writing the following shared variable

  \\NW-cRio\NW Library\NW_Force_cal

  \\169.254.106.130\NW Library\NW_Force_cal ".

  A screenshot of VI is fixed, the NW_Force_cal is highlighted.

  After the VI has been shut down and restart the VI took over running without problems. This kind of unpredictable behavior is very difficult to manage, I lost data in real time during 12 hours of recording because of this problem.

  Please suggest a solution for this problem.

  Thank you

  Guilhem

  The error has explained the issue.  The network had problems that led to the server being offline.  How to solve this problem is to understand what is meant by "real time".  It's just another way to describe a deterministic calculation.  In other words, the program ensures that everything will happen within a predetermined period.  Order things to be deterministic, they must be controllable.  The most obvious way to break the determinism is to prompt the user for entry.  As we cannot guarantee clearly not the user will respond within a given period, can no longer call the deterministic program.  In this case, we have a more subtle break of determinism.  Relying only on a network will break determinism.  It is not simply a way to ensure that the network is not getting hit harder than usual.  In this case, the network was down for a period of time long enough to raise an error.

  Here's where we get to fix things.  Once the error has been generated, the code to do with it?  The wire of the error is not used for anything else.  I expect to raise an error and stop the program.  Clearly this isn't the desired behavior.  So, why we do not use the wire for an error handling?  In case of error, you can connect the data locally.  When you cover the network, you can clear the log to the host PC that you usually use to collect your data.  This command removes the dependency of your network for the code works.  With the help of a more robust code solves the problem with the relatively easy error management.  Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.

• Photosmart 5510: my version of windows is replaced by windows 10 and my hp printer has been disconnected.

  My version of windows is replaced by windows 10 and my hp printer has been disconnected. Please help me to connect without disc

  The problem is not yet ressolved. The printer cannot connect to the wireless router.

  Test report says wireless network name (SSID) found "Fail".

• Your history file drive has been disconnected for too long. Pour garder keep save copies of your files, reconnect your player, then run a backup.

  Original title: plug your drive (Important)

  Reconnect your player (Important)

  Your history file drive has been disconnected for too long.

  To keep save copies of your files,.

  Reconnect your player, then run a backup.

  Recently installed window 8.

  Upgrade Windows 7 clean boot.

  Inspiron 580 s 1 TB

  Windows 8.1

  After TWO YEARS, someone should be able to give us a step by step, to "reconnect" an external, USB hard drive!  I unplugged and then plugged it, several times, without success.  I seem to have this problem with one of my disks USB, a Toshiba.  Access the drive through files Explorerer, seems to work, even if it is "disconnected". Historical files only has problems. Strange! Could it be the drive itself, or it is plugged in to the USB port?

  I had the same issue this morning and found a solution that worked for me.

  This post helped: Windows - historic community of 8 files windows does not recognize my drive hard iomega

  NOTE:

  -make a backup copy of the files you delete first! (just in case)

  -J' had deleted my old historical records from the files on the ext. HDD, so I lost no data. I can't guarantee that the ancient history of the file will be there if you remove the configuration files, as described below. In my opinion, it shouldn't happen, but since I have not tried, I can't guarantee that.

  After checking my disk for drive errors (none) and update the drivers (not not mandatory), I went to this location of records:

  C:\Users\your user folder\AppData\Local\Microsoft\Windows\FileHistory\Configuration

  and remove the four files that were on it. Because they determine the configuration of the file history, when I ran the service once again, I could set up my drive as if it had never been used before. I started historic files, and it lets me choose my hard drive and run the backup as it should.

• Try to reconnect the file history and then try to restart it, it says has been disconnected.

  Original title: Ihave even question rereconnecting windows player 8

  I tried to re connect my history of file player from what I've read, will reconnect the file history.  you try to restart it, it says has been disconnected. How can I reconnect it them. has the red x on the icon

  Hi Larry,

  1. What is the full error message that you receive?

  2. you try to connect an external USB driver for backup?

  You may receive this error message if the external hard drive is not properly detected.

  You can consult the section "Reconnect your drive" article and check:

  What happens if something is wrong in the history of the files?

  For more information, see the articles:

  Restore files or folders by using the history file

  Set up a drive to history file

  Protect the user with history of files files

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• vSphere Client Web - console has been disconnected...

  Just installed 6 ESXi and vCenter 6.  I try to open a console to a virtual machine from the Web Client vSphere.  I click on action-> open Console - > new Web page opens and which is completely block it displays this error message at the top.   Any ideas?

  The console has been disconnected. Close this window and restart the console to reconnect.

  
  

  
  

  
  

  restart the virtual machines seems to have solved this problem.

• The session has been disconnected

  Hi all

  I'm building one laboratory view 5.2 in my office... Because this is a laboratory environment, I could not use router company (I'm not the router admin), so I put an another Juniper 5GT as audit router...

  then I put 2 servers esxi 5.1 and 5.2 venter/view

  then I clone an ent as view desktop VM win7... then I use my ipad to connect to the server and then connect it this VM Win7... I received a message below

  "Desktop load attention".

  Your desktop is loading too slowly. You may need to activate your VPN to connect.

  Click on 'OK' " "

  then he continues to run... and I also check the Web Client to view events... I see that the user account has log on to view & this VM Win7...

  After customer view fill the bar running, it shows

  
  

  "The Session has been disconnected.

  Lost connection to server. "

  value this juniper IP route default of the machine I need?

  Thank you!!

  wyldkao

  Almost certainly a problem of remote access configuration PCoIP. Just follow the 3 steps here setting up remote access with a view PCoIP 4.6 and newer , and it'll work.

  If you still can not configure it correctly, watch the video that goes through him more in detail.

  Let us know what it was.

  Mark

• My expansion drive has been disconnected, and all the files that have been renamed on Premier Pro are missing!  Help!

  I use Adobe first Pro CS5.  I'm working on a project for a month and this morning, I realized that there is a problem with it.  To make sure that I don't junk my computer upwards, I have always to leave the files I'm working with my expansion drive and I work from there.  I have autosave all the time, etc, but apparently, at some recent point, my disk expansion has been disconnected, and Premiere Pro tells me that all my files are offline.  My biggest problem is that I've renamed all my video files in Premiere Pro, but I not rename them on my drive for expansion.  Thus, for them find would probably take me as long, if not more, of my original work.  Is it possible in the world that I can record these files and the long hours that I've already spent editing this video?  If you have an idea regarding what I can do, I would be eternally grateful.   Note: I work with AVCHD clips.

  Please, I beg you.  Whatever that is would be helpful at this stage.

  Make sure that Premiere Pro is closed, and reconnect the drive.  Everything should be good when you reopen the project.

  The exceptions are two.  Bill has raised the first.  The second is that if you have already saved the project with offline files.  Once you do that, you're done.

• My Dell computer has been disconnected for more than a year, and now Vista updates will not be installed.

  I have a Dell Inspiron 1501 which has been offline for over a year and now will not update Vista install. The security updates, 90% will be installed, but all others fail. Contact Dell or Microsoft?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• "the unit has stopped responding or has been disconnected", the hell?

  I see that this has happened after the update of the firmware. to slow firstthough, the files copied to the sansa fuze.

  now on xp and a fuze Black 8 GB, I can't copy my files - what is starts, SLOWLY.it jumps about 30% (ive bene, try to copy the same * beep * file for the last hour) and then crashes. Sometimes it gives me the message in the title of the topic, sometimes it freezes and does not just care.

  Occasionally the sansa gets "reconnected" because I see the normal windows login window popping up. (you... want to read the files, open the folder, do nothing, etc.)

  It's VERY exasperating. Asking for help, a hotfix, or something accursed. It's my first week and I received it through my mandate after the last one (2 GB) broke down.

  Update; I tried to copy the files small, about 1 to 4 MB each and they seem to work well. This one, that I am trying to copy is about 30. its as it limits the size of the file. the file is now stuck on 46%. It's like with every attempt, he adds in another percent or more. (randomly)

  always well, I prefer NOT having to wait half of my day for a single file to be copied. see you soon

  This is not a typical problem. It usually works, or it doesn't.

  It is possible that your firmware update change the USB setting. Go to Settings/System Settings/USB Mode and change it to MSC and try the copy...

  He is also anything could possibly live that you have a bad power cord. If there is only an intermittent connection inside the cable, you could get disconnects.

  Finally, it is possible that you reach a limit on the use of memory in your computer for the file. Windows may be trying to put it in a temporary cache before sending it to the course, and this cache is not complete with a small file, but with a larger.

  Just for the experience, disconnect from the internet and then turn off your antivirus program, which can monopolize lots of memory and try to copy. Obviously you have antivirus, so this isn't a permanent solution.

  But if this can help, it means that you have too many things running in the background. You can watch all the pressing CTRL-ALT-DEL once to bring up the Task Manager. Look at the Applications and look at processes, which shows you everything works. Look under the memory usage to see if there is anything that is gobbling up memory.

• Section of remote desktop connection has been disconnected due to the protocol error

  I used Windows 7.

  I first run the Windows Firewall with advanced security. Then I run Remote Desktop connection. He began to load (as many times before) and then all of a sudden has generated a message from remote desktop connection "because of a protocol error, this section will be disconnected. Please try again from the remote computer"

  However, try as I might I was unable to connect more.

  I tried first in order to run the Windows Firewall with advanced security, then VNC Server nun, then on connection desktop remotely, but it does not work. Sometimes, I get a message that the remote desktop connection was busy. I turned off my PC, but did anyway.

  I'm doing something wrong? Could you please give me a hand? Thank you in advance.

  Irina

  Hi Irina,.

  Please contact Microsoft Community. The query you posted here would be better suited in the TechNet forum because the question is about Remote Desktop connection. You can post using the link below.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• I lost the icons of Favorites after that my internet has been closed and then brought back to the top.

  My internet was arrested by chance by Comcast. When they corrected it and he turned his back, my favorites icons have disappeared. The texts are always there, but without icons. It is very useful to have the icons.

  Hi westie04,

  You should take a look at this article which discusses some of the problems with the latest version of Firefox.

  There is some information here that should help you solve your problem. Fortunately, this is a very easy solution.

  Hope this helps!