Internet, printers, and other devices does not work after recent windows upgrade
After a recent windows update automatic, I can't get online, print or use other network devices. The unit of the internet connects very well and both Mozilla and Internet Explorer from fine, but cannot 'find' network. The printer driver is installed, but the programs can not find the driver.
Hello
1. have you made changes on the computer recently?
Method 1.
If you use a connection please check the internet connection by cable if you face the same problem when working in mode safe mode with networking.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to boot mode safe mode of Windows Vistsa with networking.
e. when Windows starts, use check and Internet explore if the problem persists.
For more information, see the articles below.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Troubleshooting in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
Method 2.
Also I would ask you to put all the drivers of material from the manufacturer's Web site and check.
For more information, see the articles below.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
Automatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
I hope this helps.
Tags: Windows
Similar Questions
-
Windows Sidebar does not work after recent windows update
Because windows update ran a few days ago my gadgets has not completely loaded, they were "snack" and had no functionality. I tried tons of suggested corrections, but none works.
System 32-bit vista Home premium, desktop pc with a quad core something or other.processor
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
Method 2:
Try creating a new user account and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountIf it works fine in the new user account, then it is possible that your user account is corrupted.
So, try following the steps in the link below and try to resolve the user account corrupted:
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileIt will be useful.
-
The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English
This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.
Thanx
Hi rui2010,Place your machine in a clean boot State to see if another application is in conflict with the modem.If this fails, I recommend you reach out to the community Hauwei for assistance:Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Hello!
I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?
Thank you!
Hello
You must get the drivers latset for m computer support site.
Delete the "false: entry in Device Manager and install the new drivers."
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one. Are these drivers or another file that I could use DL?
Hi JasonBedgood,
1. Once you get the error message?
2. did you of recent changes on the computer?This error occurs if the required driver is not installed or the driver is damaged.
I suggest that you update the driver for the device and check.
How can I update the driver for network card on the computer
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on network adapters to expand.
4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
5. click on Update driver software.
6. follow the Wizard update software driver to update the driver for NICs .Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIf the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello buddies, how to solve this problem (code 31)
USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).
How can I solve this problem?
In addition, you can check the following registry key? :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)
Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?
If so, what is 'Data' for these names?
-
As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0
This may be caused by the Tab Mix Plus extension
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do not click on the reset button on the start safe mode window or make changes.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can try to install the latest Dev version of Tab Mix more if you use this extension.
See the sticky on the forum of Tab Mix Plus:
-
I work in the field environment.Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).but it runs on the Windows XP computer.For example:-Inventory.exe (work), Sales.exe (does not work)Help, please.
Hello
I suggest you to ask your question at the following link.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/
I would also ask you to contact your IT Department for further explanations.
-
I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.
I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8) -
Context menu (including all the other menus) does not work after a while.
I use ubuntu 12.04 LTS, 33.0 firefox (thunderbird also same problem).
Context menu and all menus are not works after a while (maybe 30 min)?
I have to close all firefox windows to make the menus work (make an another new firefox windows does not solve problem)
The problem this menu would not be displayed (menu popup and also normal menus) have not been reproduced approximately 2 days.
I have not try your solution because I had planned to try your solution after I encounter the problem again.
Only difference when I got problems with menu meets it is that I ran firefox from terminal invites no task bar of the unit...
(I expect to capture some bad newspapers of the terminal prompt when I encounterd new menu problem)Maybe it takes other hours or days before I met the new problem or there is a possibility that I could not this problem again until I do some changes (restart firefox from unity...)
-
Satellite U400-17R - audio device does not work after installing XP
Hello
I bought a model U400-17R with Vista Home. I formatted and installed Windows XP Professional download drivers XP Toshiba site.
Everything works, but my Sound Device does not work. When I check in the Manager of devices the Sound Drivers are there and it says working properly.
I'm lost... Can someone please help?
Hello
I think you have the same problem like me a few months ago.
I installed Win XP SP2The t is not his work because I didn't install the patches MS; KB835221 & KB888111
The patches must be installed as a first step, before the audio driver is installed.
If you have already installed the audio driver, then you must remove (uninstall) before install you the patches Ms.PS: The MS patches are part of the SP3
-
Wireless device does not work after downgrading from Windows 7 to Windows Vista.
Original title: wireless device does not.
recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?
If your computer manufacturer does not have Windows Vista drivers available, you're probably out of luck. Without drivers for these devices will not work.
'spyc' wrote in the new message: * e-mail address is removed from the privacy... *
recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?
Maybe you are looking for
-
How can I change a default contact number to send messages
Some of my contacts have more than 1 number of cells. In the new IOS, the first time I click on the "Send message" icon, he asked me what number I want to send your message. Next time, it will automatically use the number I chose. But if I chose the
-
I need to access a site that takes only supported firefox 27 or 30 and Mozilla automatically by default 37.where can I get a download on Mozilla?
-
English installed W2K and the Spanish XP upgrade compatibility issues
Bought the package upgrade XP here in Spain. Impossible to install on the PC with installed English Windows 2000. No indication on the box or elsewhere in the package that the upgrade is specific to a Spanish version of W2K. Error message saying inco
-
Schedule of NAPs blackBerry Smartphones
Is it possible to repeat each calendar item for a different time period (you can with options of 2 weeks of MS OUtlook - 5 minutes - I think) Without it, everything shuts at least every 30 minutes - which makes it unusable (IMO) Newbie, who got my BB
-
IOS WEBVPN problem: only the LAN access
Hi, I have a problem with the WEBVPN configuration, the client can connect to the gateway, but it cannot reach the Internet. My camera is C877 with c870-advipservicesk9 - mz.151 - 3.T2 This is my setup: version 15.1 no service button horodateurs serv