Internet to my windows media center tv did not work after that I just watched several shows on that and then all of a sudden it says no supported region or country.

Similar Questions

• Windows Media Center visualizations will not work

  My Windows Media Center visualizations will not work for some reason any. its been like that for a while.
  When I listen to music and want to see my office shows that the program is still underway
  I thought it has something to do with the visualizations I instaled on Windows Media player
  (like ribbons and Upcube)
  I tried to remove them, they either come back or he will constantly ask me to go to it

  my system is portable

  • Windows Vista Edition home premium
    • Intel core 2 DUO

    32-bit operating system
    2.00 GB

  I missed a CD command before the directory (since corrected) so orders would be as follows:

  CD C:\program files\windows media player\visualizations\
  
  DIR

  You'll see the DLLs listed here, they are visualizations that have been installed (if the author decided to use directory default visualizations) NOTE: there may also be cases where the author badly spelled directory visualizations and used something like "visualizations".

  regsvr32.exe - u nom_fichier.dll  (use only the indicated file name that you want to remove)

  repeat if necessary.

• Xbox 360 Windows Media Center Extender does not connect after upgrade to Windows 7

  Xbox 360 Extender worked fine on Vista Home Premium (32 bit). After the upgrade Windows 7 Home Premium (32 bit) on-site, when I turn on Xbox and the attempt to connect to Windows Media Center, you get an error saying unable to connect.

  Back on the Windows 7 PC, I see the mcx1 file it under the users folder. But when I got to the tools, it says no set Extender in place.

  Someone at - it suggestions on how to change settings in Windows 7 while the Xbox can connect?

  Just in case someone encounters this problem, here is what I did:

  1. reboot the Xbox until Windows Media Center connects.
  2. back to the PC. Start Windows Media Center.
  3. go into tasks > settings > Extender
  4. Select Xbox 360 Media Center, then delete.
  5 PC removes the old mcx1 folder used to use with Vista.
  6. start the Xbox, go to Windows Media Center
  7 write down the code on Xbox's 8-digit ' display
  8. on the PC, you will be prompted to set up the Xbox extender
  9 follow the instructions to enter 8 digit code
  10. new file will be created, mcx1-PCNAME.

  You're all set on 7.

• The Windows Media Center Guide data - channels Incorrect after that provider changes Lineup

  8/1, Cox left HD and SD of The BigTen Network 263/1263 channels for their new channels 109/1109 in the Fairfax area (22307). Zap2it again (24 days later) on their old channels.

  WMC is based exclusively on Zap2it lists of channel in order to settle and watch the channels for CableCard card systems, indicating that there is no way to change/add channels manually. For this reason, we have no way to view the right channels until Zap2it updates the range.

  I tried to contact Zap2it directly, but got no response. It is just 2 channels I know immediately, there are more than likely others also. If Zap2it change their lineups accordingly, is a way to manually manipulate the data updates and Zap2it block? If this isn't the case, Microsoft do anything to this topic?

  Hello Brad,

  Thanks for the reply and we update on the State of the question. I'm sorry for the delay in response. I understand that this question is related to a bad configuration parameter between Media Center and Zap2it.

  Microsoft works with suppliers of different channel to make sure that Windows Media Center is running, but in rare scenarios in one or the other setting may not work as expected.

  I would like to inform you that you can provide your comments to the Microsoft Connect Web site. Your thoughts are valuable for us.

  The Microsoft Connect Web site is a portal to submit questions and comments regarding our Electronic Program Guide (EPG), lack of channels, misaligned, wrong time for shows, lack of network head in Windows Media Center.

  Microsoft Connect Feedback for Windows Media Center

  You can also report this problem to Microsoft online technical Support. The calls support team will be able to provide one on support for this issue.

  Microsoft Support contact us

  Feel free to post on the Microsoft Community, in case you have problems when you are working on Windows. We will be happy to guide you.

• The product key for the Windows Media Center 8 does not work!

  I tried 3 or 4 times to use the product key for the Windows Media Center 8, that you sent. But it keeps saying "this key will not work. Check it or use a different key. "I tried too communicate with someone who could help me and now I am very displeased with Windows. I tried several times.

  You are running Windows 8 or Windows 8 Pro? Media Center requires that you run Windows 8 Pro and your installation must be enabled.

  http://techingiteasy.WordPress.com/2012/11/29/how-to-get-your-free-Windows-Media-Center-key-for-Windows-8-Pro/

  Add the feature does not

  To work around this problem, disable the Nalpeiron Licensing Service until you try to install the feature. To do this, follow these steps:1.Swipe from the right edge of the screen, and then click search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on search.

  2. type services.msc, and then press or click on Services in the results of research.

  3. press on or double-click Nalpeiron Licensing Service or NLS.

  4 tap or startup type-click and select disabled.

  5. press or click OK.

  6. restart the computer.

  7 install the feature and then restart the computer.

  8. Repeat step 1 to step 3, and then change the startup type for the licensing of Nalpeiron or NLS on automatic Service.

  9. click OK and restart the computer.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• Windows Media Player 12 does not work after you choose the initial settings

  Hello
  I tried to use windows media player 12 on my computer laptop windows 7 and it won't work. It worked the first time and I chose my settings, but it would not open the player itself. I tried to do it on the guest account, but it's the same thing. Does anyone know how to fix this? -Chris

  My post was actually in response to JRTLOVER:

  Why we cannot uninstall and reinstall from the CD just Media Player... or is there a way to fix this?

  I have seen that it was already proposed earlier in this topic, my apologies.

  Regarding your problem, have you tried to launch directly executable WMP? To do this, click Start, type wmplayer.exe in the search box and press ENTER.

  You should also check if WMP is already running: start the task (Ctrl + Alt + Delete) Manager, look for one or more elements called wmplayer.exe on the process tab, select each item and then click end process , then try to start WMP again.

  Tim Baets
  http://www.BM-productions.TK

• Why is internet TV on Windows Media Center

  Why is internet TV on Windows Media Center

  Microsoft abandoned Internet TV on 20/09/2012.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• How to watch Internet TV for Windows Media Center to the Japan?

  Hello

  Is it possible to watch Internet TV for Windows Media Center to the Japan or watch television show or movies without TV tuner and cable?

  I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.

  My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.

  I still believe that Internet TV is supported in the Japan.

  You have an idea for this troubleshooting?

  Please help me.

  Thank you

  Monday, December 29, 2014 08:36 + 0000, avocado0227 wrote:
   
  > Can we watch Internet TV for Windows Media Center to the Japan or watching television or movies without TV tuner and cable show?
  >>
  >>
  >>
  > I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.
  >>
  >>
  >>
  > My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.
  >>
  >>
  >>
  > I still think that Internet TV is supported in the Japan.
   
   
  Microsoft has removed completely support Internet TV in September 2012.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• DOWNLOAD internet Tv pour windows media center version 4.2.2.0

  Download the file installation internet Tv pour windows media center version 4.2.2.0 for Media Center

  Microsoft abandoned Internet TV on 9/20.
   
  | Download the installation file for windows media center Internet TV media
  Center for Version 4.2.2.0
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Windows Media Center Receiver Service stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Started getting the error Windows Media Center feared about 3 weeks ago.  I have tried the MS fix, reflected on the web for solutions, have run sfc/scannow (no violation of integrity) and nothing works.  Cannot restore system it's been 3 weeks.
  System was working fine 1 day and then bam... error messages began to appear.  I can always go into Media Center and listen to music or watch recorded shows.  I just can't watch TV or record something again.   I checked the Device Manager - material and everything works fine. Need help please...   Thank you.

  I guess that's the article that you are referring to?

  Error message when you start a Windows Vista-based computer: "Windows Media Center Receiver Service stopped working and was closed".
  http://support.Microsoft.com/default.aspx/KB/936229

  This site has some good ideas for you to try.

  How to fix the Windows Vista registry entries and files Media Center
  http://blogs.msdn.com/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  "Windows Media Center Receiver Service... "Error
  http://thegreenbutton.com/forums/p/50233/223005.aspx

  http://www.Google.com/search?q=Windows%20Media%20Center%20Receiver%20Service%20stopped%20working&hl=en&RLS=com.Microsoft:-AU & output = search & TBS = rcnt:1 & tbo = 1

  See if the System File Checker can help you?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  See if you can isolate some processes of third party as the culprit?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• Button 'Back' on the Windows Media Center remote is not recognized by Windows 7

  I am currently using the Windows 7 RC.  I have been for awhile now.  Recently, while trying to use the Hulu app, I noticed that the 'back button ' on my Windows Media Center Remote no longer worked to switch from the full video on the menu.  I contacted the support of Hulu and they guided me to an online tool that shows the output of a button on the remote control.  All other keys work fine, but the 'Back' button doesn't produce any output.  This means that Windows itself is not recognize the key.

  The button works in Windows Media Center, itself, but it does not work when I am in Windows.  It worked fine for the last few months and I had not used for about a month (and reinstalled the RC) and now it no longer works.

  The receiver displays in the form of "eHome Infrared Receiver" Device Manager and when I try to update the drivers it says I have the latest version.  Something seems to be wrong with either the driver or there is a problem in Windows 7 itself which is the cause of not recognizing this key more.

  Well, I tried using the key on the keyboard and which worked to switch between menus.  I accidentally hit the ESC key on the keyboard, which worked to switch between the menu and the video as well.  Out of curosity, I tried a few other buttons on the remote control then and the 'Clear' button, which is down by the pad on the remote works!

  Thanks a lot for your help mark! :-)

• The Windows media player 11 does not work correctly

  My windows media player 11 does not work properly

  whenever I go to open a video with it, it appears on the taskbar, you can here the sound, but the player himself does not appear on the destop

  I tried to reinstall the drive, and I get the same thing.

  If I go to roll back the player, add remove programs say it has been restored, but the media runtime in Add Remove programs won't disappear because it says that windows media player 11 is always there.

  Help

  Hello rockys_rod,

  To fix it, simply remove your old library files. Then have Windows Media Player find your new files. It will not destroy your music files.

  How to get WMP to re - index your music:

  1. close Microsoft Media Player.
  2. click on Start and then run
  3. in the box, type the following:
  [list] %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player

  4. click on OK and a folder containing your library files will be displayed
  5. delete all files ending with .wmdb
  6. open Microsoft Media Player
  7. press F3
  8. Select the addresses of your music files
  9 WMP will re-index your music.

  If this does not help, try the FixIt in the article below:
  KB Article ID: 947541 -Windows Media Player stops responding after you install a third-party product that registers its own version of the Wmp.dll file

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect.

  Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect. What should I do? I have new Id and worked, but not with my phone.

  I live in Slovakia and I bought this iphone in Florida USA

  Thank you, Maria Nagy

  Any ideas?