interpolate table 1, D with a square

Similar Questions

• Table 1 d with rejection of the two consecutive points

  Hello

  I have table 1 d with 10 measuring points. I treat points in pairs and according to the difference between two consecutive points, I have decision weather the two points must remain in the table or should be rejected. For example, my 1 d table looks like this: 10, 20, 30, 35, 40, 44, 50, 51, 60, 69. I calculate the difference between consecutive points by pairs: 20-10 = 10, 35-30 = 5, 44-40 = 4, 51-50 = 1, 69-60 = 9. I would like to reject the table points with the value of the gap less than 2. In my case, the points are 50, 51 and the table after the rejection should have 8 items and look like this: 10, 20, 30, 35, 40, 44, 60, 69. What is the most elegant way to do it? I'm in LabVIEW 8.6.

  Thanks in advance!

  Review your original message and your example to better understand your stated requirements.

  "I treat the couple points."

  You have to take into account only the pair of 1st and 2nd point, then don't take into account the point of 3rd and 4th pair so on and so forth.

  Never consider the 2nd to 3rd or her never consider the 4th to the 5th, so on and so forth?

  What is your table? If it is very large (1000000 points), you may need to consider other options for the use of memory and speed.

• Unable to draw the table 1 d with a cluster of 2 items on a XY Chart

  I am unable to draw a table 1 d with a cluster of 2 items on a XY Chart. The data displayed at the entrance in the graph, but nothing is drawn. I'm trying to draw a line connecting each point generated.

  You need a registry change on the inside of loops as well.

  But beyond that, you create too complicated a structure.  You create several plots of 1 point and not a single multipoint parcel.

  See attachment for the change that works.

• Why my photos blocked, the faces are covered with white squares

  photos from facebook etc. have the faces covered with white squares, sometimes whole image is empty

  Hello

  1. what operating system is installed on the computer?

  2. what browser you use on the computer?

  3. the problem only occurs for pictures on Facebook?

  If you are having problems with Facebook, I suggest you send the link for support:

  www.Facebook.com/help

  If you have problems with other sites too, please provide more information to help you best.

• When you use Excel or my Peachtree Accounting program, entered digital as "$152(32 in the accounting package or the same number with a square symbol as the decimal point in Excel.)". No idea what I should check first?

  When you use Excel or my Peachtree Accounting program, entered digital as "$152(32 in the accounting package or the same number with a square symbol as the decimal point in Excel.)".  No idea what I should check first?

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Office Excel and would be better suited to the office community. Please visit the link below to find a community that will support what ask you

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?d=1

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Mr President.

  How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Concerning

  Normally at the height of the table control you need property autoheightRows -1 and then set height in the table like this inlinestyle

  height: 300px;

• creating table of partition with null values

  Hello
  
  I have a table with 20 GB of data. I changed this table in the table to partition with partition of the range
  the column with which I took for range (date), holding the values null
  
  can I have a partition for null values?

  Hello

  CREATE TABLE ICBS. KNET_STMT_EXTRACT_NEW_P
  (
  SRVC_TYPE VARCHAR2 (200 BYTE),
  FILLER_1 VARCHAR2 (200 BYTE),
  RTE_STAT VARCHAR2 (200 BYTE),
  TRAN_DATE VARCHAR2 (200 BYTE),
  TRAN_TIME VARCHAR2 (200 BYTE),
  POST_DATE VARCHAR2 (200 BYTE),
  DATE OF REC_INSERT_DT,
  DATE OF PROCESSED_DATE,
  KNET_RECON_RESSON VARCHAR2 (100 BYTE),
  NEW_TRAN_DATE VARCHAR2 (10 BYTE),
  REASON VARCHAR2 (200 BYTE)
  REASON_IND NUMBER (5),
  NODE_ID VARCHAR2 (8 BYTE),
  PROGRAM_ID VARCHAR2 (8 BYTE),
  USER_ID VARCHAR2 (8 BYTE),
  TIME_STAMP DATE
  )
  ICBS TABLESPACE
  PCTUSED 0
  PCTFREE 10
  INITRANS 1
  MAXTRANS 255
  STORAGE)
  64K INITIALS
  MINEXTENTS 1
  MAXEXTENTS UNLIMITED
  PCTINCREASE 0
  DEFAULT USER_TABLES
  )
  LOGGING
  PARTITION BY RANGE (REC_INSERT_DT)
  (

  KNET_STMT_EXTRACT_NEW_P_DEC11 PARTITION VALUES LESS THAN (TO_DATE (' 2012-01-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))
  LOGGING
  NOCOMPRESS
  ICBS TABLESPACE
  PCTFREE 10
  INITRANS 1
  MAXTRANS 255
  STORAGE)
  INITIAL 1 M
  MINEXTENTS 1
  MAXEXTENTS UNLIMITED
  DEFAULT USER_TABLES
  ),
  KNET_STMT_EXTRACT_NEW_P_JAN12 PARTITION VALUES LESS THAN (TO_DATE (' 2012-02-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))
  LOGGING
  NOCOMPRESS
  ICBS TABLESPACE
  PCTFREE 10
  INITRANS 1
  MAXTRANS 255
  STORAGE)
  INITIAL 1 M
  MINEXTENTS 1
  MAXEXTENTS UNLIMITED
  DEFAULT USER_TABLES
  ),
  PARTITION KNET_STMT_EXTRACT_NEW_P_MVAL VALUES LESS THAN (MAXVALUE)
  LOGGING
  NOCOMPRESS
  TABLESPACE TBL_MAXVALUE
  PCTFREE 10
  INITRANS 1
  MAXTRANS 255
  STORAGE)
  INITIAL 1 M
  MINEXTENTS 1
  MAXEXTENTS UNLIMITED
  DEFAULT USER_TABLES
  )
  NOCOMPRESS
  NOCACHE
  NOPARALLEL
  MONITORING
  ALLOW THE MOVEMENT OF THE LINE;

  Published by: hitgon on April 30, 2012 10:56

  Published by: hitgon on April 30, 2012 10:58

  Published by: hitgon on April 30, 2012 10:59

• You can create a table of contents with page numbers using bookmarks?

  You can create a table of contents with page numbers using bookmarks?

  Sometimes a long article has bookmarks to help navigate, it but has no real TOC (table of contents) on the first page. In such a situation, I think that it would facilitate the reading of the paper version if you can somehow create a table of contents with page based on hierarchical bookmarks in the document numbers.

  If this is not possible from Acrobat, is there a third party app?

  Indeed you have created a script for this - sorry that I missed it. I should have...

  Acrobat - Create TOC bookmarks

• Question on the implementation of the tables of choice with the arbitrary clues

  First some background: I calibrated a pyrometer each 25 c from 350 up to 1000.  I placed the values in two tab delimited text files tables (two lines of output different pyrometer).  In the program, I wrote, a level of arbitrary temperature between 350 and 1000 can be entered in, and equals to a fractional index for one of the two tables.  Linear interpolation is used, and a current level is output.  It works just fine.

  The problem is that it is a very long process to calibrate a pyrometer for specific temperature levels.  It would be much easier to calibrate for specific current levels and get readings of arbitrary temperature of these currents.  I wonder how to implement this with lookup tables.  I tried just to put all the values that I had to the number of line corresponding to their level of temperature.  IE, 500 it's current level would have the 500 index (in fact it would be 500-350, given that the spreadsheet won't save blank lines before the first value).  It works fine until you enter a temperature level that has a current value.  The problem is that the linear interpolation function no longer works, because it does the interpolation between two adjacent index values.  I need something that will interpolate between two values of arbitrary index, as between 500 and 525 (or maybe 522 and 573, for example, in the future).

  Any ideas or suggestions would be greatly appreciated.

  
  

• receive emails with no squares only added to e-mail photos with attatchments vacuum

  When my nephew sent me an email that contains a series of images all the that are described to get square with the image number.jpg list and all jpg files of the attatched pictures to the bottom of the email.
  It uses Incredimail
  can help you with this problem
  Your John W

  I would say that your nephew gets a real email client. IncrediMail is far from clever for its own good and made terrible emails that work in some email clients, from time to time.

• How to organize a table like 'move with the text' and 'around and underneath "? For now, my only option in the menu drop-down is "in line with text.

  Hello. I am trying to format a table, so that when I hit it, it moves to the bottom of the page and the bumps any text underneath down as well (that is if you can see the whole table and all text at any time)

  .

  However, the only options I seem to have are moving with the text > inline with the text. The first part is what I want, but having the means of inline with the text of table than all text below it floats UNDER the table, and you can't read it.

  PIC 1 - My only option when "move with the text" is selected. As you can see all the other features are also grayed out.

  

  Photo 2 - I want now, select above and below, but when I select something other that in line with the text...

  

  PIC 3... it jumps to stay on the Page option is not what I want.

  

  Any ideas?

  You can have a floating table in v4.3 Pages ' 09 that moves before the text typed before it, but this feature has not been added to any release of v5 Pages. Simply set the table in the Wrap Pages ' 09 Inline with the text Inspector, and object causes the film if you wish.

• What should I do with the square firefox orange now that I just installed firefox on the desktop?

  I just installed Firefox because I had trouble with my Safari browser and Fixfox has been recommended. I have an apple computer, it's a macbook pro. I downloaded the app and it put in the application and put the fox icon and the world down on the dock on my screen. I just discovered a square orange button that looks like an external drive that is located on the right side of my desktop. I don't know what to do with the orange button and I don't see any information in this respect. Thanks a lot for your help. I look forward to all the cool things I read on the use of this product.

  If this icon shows once again then make sure you install Firefox properly and once done, drag the Firefox icon to the trash.

• Problem using applescript to put data into the table of numbers with column heads

  I have extracted the data from certain Web pages and want to place the data items in a table of numbers.  I wrote the applescript to extract pairs of data into two lists, but encountered a problem when you try to put the data items in a table of numbers.

  I hope I've isolated the problem eventually reduce version of the data table and writing.

  Calendar_Month	Alvarez	Laundry	Linen	Products
  March-2014
  April 2014
  May-2014
  Totals:	0.00	0.00	0.00	0.00

  Define theLabels to {"Alvarez", "Flax", "Laundry", "Products"}

  the nominative value {11, 22, 33, 44}

  Tell application "Numbers."

  say table 1 on sheet 1 of 1

  rowIndex Set of 3

  q Set of 2

  say the line rowIndex

  colHead theLabels point q value

  the columnIndex value address column colHead

  tell the cell (columnIndex)

  value defined in point q of the nominative case

  tell the end

  tell the end

  tell the end

  tell the end

  I arbitrarily chose to line 3 of the table to demonstrate the problem.

  Each data item is associated, due to its position in the list, with a label that determines the column of the data table, where it should be placed.

  The illustrated script pitches the 2nd data element in the list in the column headed "Lin".  This seems to work ok.  But if q is set to 1 the script fails with

  get address of column "Alvarez" in line 3 of table 1 to sheet 1 of the document 1

  -> error number - 1728 column "Alvarez" in line 3 of table 1 of sheet 1 of document 1

  It fails also with q the value 3 or 4.

  I probably did something really stupid, but I can't understand this behavior.  Advice please?

  Under: Numbers v.3.6.1 Script Editor 2.7 2.4 OS X 10.5.5 Applescript

  Two questions.

  (1) the order of the text in theLabels = {"Alvarez", "Flax", "Laundry", "Products"} and differ from the order of the text in the header row. Is this correct?

  (2) you are putting the value 22 (point 2 of nominative) in cell D3, where column heading of D = "Flax", which is article 2 of the theLabels?

  Respect,

  H

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• Tables of Images with different heights, causing the removal of Menu

  OK, I posted this issue in the Council of LabVIEW before I realized that it was associated with Vision.  I made some progress, narrowing of the cause, so I thought it would be best to start a new post here.  Here is the original post:

  http://forums.NI.com/T5/LabVIEW/blank-pop-up-menus/m-p/3281194#M958610

  I'm running into a problem with all of my menus of LabVIEW to shutter when I create arrays of images where the heights do not match.  I have attached a vi I created to illustrate the issue.  In this document, I take a starting image and then extract subsets of it.  Because I don't know how much I'll have to check out until the moment of execution, I'm subpictures in an array.  What I've discovered, is that if the heights of subpictures don't match, I get a weird bug that causes all the menus in LabVIEW empty.  This includes all right click pop up in the façade, block, or Project Explorer diagram and drop-down selections as for enums and ring controls.  It also includes the file menu at the top of the window.

  Rerun this vi with subpictures equivalent height or no subpictures corrects hidden menus.  In addition, running IMAQ Dispose (with Boolean true of images) corrects the problem.

  I'm relatively new to the Vision, so I don't know if I'm missing something basic, but please let me know what you think.  Is there a better way to do this?

  Thank you

  Tim

  Hi Tim,.

  Thanks for reporting this problem. I have reported as a bug.

  I recommend using a Cluster or the KING for manual zoom toolbar. If you want to use an array, each element of the array must maintain the same amount of zoom. (Similar to each LED in a table must have the same color.)

  Sorry you came across this bug.

  Kind regards