Interrupted sleep function

You just press sleep and closing the lid on the MBP Mid 2014 sleep is interrupted.

System:

MacBook Pro (retina, 15 inches, mi 2014)

2.5 GHz Intel Core i7

16 GB 1600 MHz DDR3

Intel Pro Iris 1536 MB

NVIDIA GeForce GT 750M

Hello rintin78,

Thank you for using communities of Apple Support.

I understand your post this sleep after selection and close the lid of your MacBook Pro that sleep is interrupted. I know how it is important for your Mac go in "standby mode" correctly. I recommend following the steps listed in the following article to help solve this type of problem:

If your Mac does not sleep or wake up when expected

Best regards

Tags: Notebooks

Similar Questions

  • With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

    With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

    (It sleeps)

  • Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

    I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

    Hello

    All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

    Order of the facilities is as follows:
    -Windows XP
    -Display driver
    -Audio driver
    Toshiba - common modules
    -SD Card host driver
    -SD Card Driver
    -BlueTooth Stack
    BlueTooth - Easy Connect
    -Mouse driver
    -Modem driver
    -LAN driver included with Windows XP
    -Infrared driver
    -Toshiba Power Saver
    Utilities - Toshiba
    Toshiba - post Mobile
    -Toshiba Console worm.
    -Toshiba Hotkey for display devices

    I hope that you will be able to install Windows XP Home edition successfully.

    Good luck!

  • Sleep function and passing binary icon updated

    Hello

    I'm new to LabWindows/CVI and I have a question which might be very simple to answer.

    When a sleep function is used within a binary switch, how can I get the icon on the main table to update as soon as I click on the switch, rather than change the status that the sleep function is complete?

    In other words, if I have a switch to which I have applied a delay of x seconds (via the sleep function), when I run the program and click on the switch, its status changes after x seconds. Instead, I'd like to change it immediately, and then wait x seconds before the action of the switch to take place...

    I appreciate all help. Thank you!

    Just before calling sleep, add: ProcessDrawEvents();

    JR

  • How to activate the Sleep function to put the computer to sleep if a program is open?

    I have Windows Vista basic on a desktop Dell 530.  I found that if I have a program or application running (such as I-tunes or windows media player) then the Sleep function will not put the computer to sleep.  How to activate the Sleep function to replace these programs and put the computer to sleep?

    Note: This is how it was with windows XP, the Sleep function would put the computer to sleep no matter what was running, he was reliable, if you left the computer and I forgot that you had something running.

    Thanks for your help.

    Hi kevino4130,

    If you disable sharing on your computer (not only the power settings) of media, it should allow him to enter the mode 'sleep'.

    See if that does not solve your problem and let us know.

    Dave D

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Sleep function does not

    Sleep function does not

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

    Read the info on sleep disorders in the tutorial above.

    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Also read this tutorial; as well as the 'related links' at the bottom of the links above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Activate the Sleep function on menu

    Original title: ACTIVATION FUNCTION SLEEP

    How can I activate the sleep function under options of closing on Windows 7 Ultimate? It remains disabled. Activate Windows after a clean installation allows in general with her. Unfortunately, this time it remains disabled causing inconvenience.

    Hello

    You can not enter the correct command. There is a space between powercfg and -a. Make sure that the command has been entered correctly.

    Also, make sure that you have downloaded the latest display driver for Windows 7 Toshiba Web site activate sleep under power menu.

    Here is an article explained the reasons underlying the "sleep mode" disabled under power options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/why-isn ' t-sleep-available

    Please keep us informed.

  • Windows 7 auto sleep function does not

    I put the sleep on the night feature on my desk and the next morning, when I go to use, the computer is turned on.   How can I make the computer sleep?

    Original title: Windows 7 using the Sleep function.

    Hello James,.

    Thanks for posting your query in Microsoft Community.

    1. What have been the recent changes made on the computer prior to the question?
    2. If it works much earlier?

    This problem may occur as a result of changes in power settings.

    You can try the following methods and check if this is useful:

    Method 1: I suggest you to perform troubleshooting of power utility to set the power of your computer settings and check if it works properly.
    Open the troubleshooter of power

    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    Method 2:

    Windows 7 is not going to sleep
    http://support.Microsoft.com/kb/976877

    Additional information:

    Sleep and extended: frequently asked questions See(why doesn't my computer go to standby or hibernate as expected, or why it suddenly wake? )

    I hope this helps. Please let us know the results. Feel free to write us again for any help.

  • BlackBerry Smartphones SLEEP FUNCTION QUESTION

    I have a Pearl 8130 (Verizon).

    I'm if ask about the 'sleep' function that happens when you buy a case with a magnet flipper.  Is it just dim the screen immediately?  Or does do something else?  I'm curious because I bought a case of Pinball that I am not satisfied and basically only he wanted for this function - is it REALLY save battery?  What is necessary.  Thank you!

    No it isn't the same thing as the sleeper magnet puts the BB sleep otherwise, then in the case. The backlight to 80% of gradation is a good battery saving tip as well, but is not the same thing that put the BB sleep in the case.

  • Sleep function works is not in the business of Window7

    Hello

    I just upgraded from XP to Win7 Enterprise version.

    The sleep function has stopped working on my T61. No matter what I do - close the cover, press the key etc. of sleep - sleep light turns on for a few seconds and then returns to the ready state.

    Help, please.

    Thank you

    Zaidih

    Do you have the Win XP to 7 upgrade installation or own 7? Furthermore, have you installed all lenovo drivers after installing Win 7? Win 7 has recent updates from MS?

    For me, this looks like a device connected to your T61 not allowing him to go to sleep, I suggest you check the properties of the power management of any external devices, look at how to do on the next page (5th tip):- http://windows.microsoft.com/en-US/windows7/Sleep-and-hibernation-frequently-asked-questions

    More details about your configuration, better we will be able to help.

  • Sleep function

    I'm new on iMac and Mac on a whole. If I place my iMac in mode 'sleep', but I still want to download data (synchronization of mettle for my iMac items) during the night, would this work?

    To put it simply, sometimes I put something to download, and with Windows, I would simply turn the monitor off while continuing to treat the download overnight. This is slightly different with an iMac, where the question on mode 'sleep'.

    This article can help you, take a look how Power Nap works on your Mac - Apple Support

  • increase the time settings for the 60 minutes to 2 hours sleep function

    MODE 'SLEEP' 60 MINUTES, MY COMPUTER TURNS ON, WANT TO CLUTCH TIME TO 2 HOURS. HOW TO DO THIS.

    Hello

    Control Panel - Power Options

    These show you how:

    How to change the power Plan settings in Windows 7
    http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

    How do I change the sleep settings in Windows 7
    http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

    I hope this helps.

  • SLEEP function does NOT work!

    Hi, all of a sudden my sleep buttons do not work!  When I click on 'Sleep', the monitor stops and the PC begins to close down, but then reason that the PC (and monitor) will be provided in works immediately...  Someone has an idea?  :)

    Thank you
    Mark

    Hello

    If sleep used to work, you can try a system restore to when it worked. The cause could be
    an update of Windows - especially a update driver then check Control Panel - Windows updates - if you need to
    Remove on look in the lower left - installed updates and uninstall - then you can right click on an update
    and so it will not install to HIDE it. Following the publication of the update could solve your problem and have probablt is the
    best way to take 1st.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    -------------------------------------------

    More if necessary:

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows 7 power options, auto sleep function not working not

    Original title: cannot set option sleep

    Twice the pwer savor sleep option has failed.  I could correct once. on Windows 7 Ultimate but now I can not reset it.  My desktop pc runs every day now when a decision is made on pc.  Why this keep happening?

    Sincerely,

    Frank

    P.S. I have been always a registered user and you refer to my friends.  If not solved this will end the references that I give.

    Hello

    ·         What were the changes made before that happened?

    ·         If it works much earlier?

    I suggest you follow the below link that can help you solve this problem:

    Windows 7 is not going to sleep

    http://support.Microsoft.com/kb/976877

    It will be useful. Let us know for help.

    Regrads,

    Ramata Thakur

  • change the vista sleep button to stop the function

    I use win vista and I want to change the button to stop the sleep function

    Please help me in this matter.

    Thanks to you all

    I use win vista and I want to change the button to stop the sleep function

    Please help me in this matter.

    Thanks to you all

    They are 2 different applications. You do not change them. Just add what you don't have.
    Here is the tutorial to show you how to add the option stop. Use method 2. It is easier.
    http://www.Vistax64.com/tutorials/105003-shutdown-options-start-menu.html

    t-4-2

Maybe you are looking for