Interruption of the external connection USB - C display after sleep

Similar Questions

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• USB loses the external connection with hardrive

  Hello

  I have a new HP pavilion touchsmart 15 notebook PC 15 - n058ed with some problems on USB 3.0 in combibation with the Toshiba external hard drive.

  Sometimes, the connection is lost. So backup refuses to go. The message to reformat the drive to use it again.

  The hard drive is still powered. The laptop does not work. Turn off at night.

  Nobody knows what is happening.

  Best regards Jan

  Hello new probably,

  I'm sorry that the solution I linked you was too difficult to understand. I can certainly understand that as the site is not exactly easy to use. I'll give you a few steps to try until find us a solution that works for you. Please, try the steps what I am stating to you below:

  Step 1. In the tile Menu type 'Control Panel'

  Step 2. Click on Control Panel

  Step 3. Click Security / Power Options

  Step 4. Click on change power settings

  Step 5. Click on change advanced power settings

  Step 6. Scroll USB settings and disable the USB selective suspend setting

  This will prevent your system to put the USB drive in mode 'sleep' and should solve your problem. Please if the problem persists re-post and we can try additional steps. Thanks for posting this topic on the Forums of HP. Have a great day!

• Vista will not recognize the projector connected for multiple display

  I'm under a system dual boot with Windows XP and Vista.  When running under XP, I doesn't hurt to connect a projector to my laptop and extend the desktop on the projector for meetings and others.

  When I am running Vista, it does not even recognize that the projector is connected.  However, once I have connected the projector, if I reboot the system, it will then display on the projector.  If I disconnect the projector, the screen does not reappear on the screen of the laptop, I have to restart, with the projector removed for office reappear on the screen of the laptop.  I'm hoping to get multiple monitors to work with Vista, as it does in my XP boot.

  For the purpose of the next presentation running in XP is not an option.

  Hi cptrigeek

  Try these steps and check if that helps:

  Method 1: We can try to perform a power cycle of the projector.

  Remove the cable from the power of the projector and this continues for 5-10 minutes. Also do the same for the laptop, Dungeon, it off. Then put back in place and start the projector. Now, start the laptop as well. Connect now. Now, you will need to install the driver for it (if there is one). After which, you need to configure the settings of the laptop.

  Method 2: Check the following steps:

  1. connect the projector to your Windows PC. NOTE: the following steps apply if you use your PC in MIRROR mode only.

  2. on the screen of the computer, right CLICK on the desktop and select Properties.

  3. click on the SETTINGS tab. If you want that your displays in mirror (what you see on laptop, it's what the public sees) you must make sure that the box "extend my desktop to this monitor" is DISABLED. If you see a box of "mirroring", remember to check it out.

  4. drag the slider to 1024 x 768 screen. As a general rule, the external monitor may limit this parameter. If your screen is higher, it might not display on the projector, then you want to test this until you're ready to take the floor. Drag the color to highest (32 bit) if available or medium (16 bit) quality if the first is not available.

  5. now select FN and press the function key. This key is usually given by a small screen icon, the CRT/LCDtext and is usually found on F8 or F5 even. Press the appropriate operation button ONCE and wait. After a few seconds, the second screen should light up. Be patient, it may take up to 5 seconds. On the projector, it may take up to 10 seconds for the projector to detect your system and switch. Note: a second press of this function (in general) will switch to monitor EXTERNAL only. A third press stop INTERNAL onlyand the circle for each push after that. Also note that some laptops can do this sequence in a different order, so learn your system so that you can quickly to the desired mode.

  6. click on the ADVANCED button. If 'apply the new settings to display without restarting' is not selected, select it. Under screen refresh rate, select 60 Hz. click APPLY and CONFIRM the choice. Click OK to close the ADVANCED options dialog. Close the display properties dialog box. You should now see a mirroring of your monitor on the second monitor.

  7. test: A test, disconnect the second monitor. put your mobile PC to sleep. He wakes up and let it fully come (login if necessary), and then reconnect the external monitor. On some machines, he needs to quickly display the screen in the last known state (you may need to wait up to 10 seconds). If it is not correctly displayed, press the switch function, ONCE. Yet once, note that it can take up to 10 seconds to view, so be patient. If only the projector display now, some pressure on the function switch key should provide for both screens again. If you can't get the projector to display, check all your connections and settings above.

  8 Note that when you use the projector, after pressing the function for changing the monitor button, it may take up to 10 seconds for the monitor find and block on your machine. Just wait. Pressing on the keys new fkey can simply ruin your settings or turn off the projector.

  9. not all laptops work the same way. Please make sure you learn how your work before you get to your presentation.

  (Not mirrored)

  1. If you do NOT want mirrored poster (display of different internal and external), CHECK the box next to the line that reads "extend my Windows desktop to this monitor." This SHOULD result in the external monitor display an image which is an EXTENSION of the current desktop.

  2. in the settings dialog box, the internal monitor appears as a '1' and externally as a '2 '. Click ONCE on the '2 '.

  3. with '2' selected, drag the Screen Resolution slider to the left or to the right until the resolution reads "1024 x 768". Also affect the quality of the highest (32-bit color) if available or average (16 bit) if the first is not available.

  4. click on the ADVANCED button. If 'apply the new display settings without restarting' is not selected, select it.

  5. Select the MONITOR tab. Under screen refresh rate, select 60 Hz. click APPLY and CONFIRM the choice. Click OK to close the ADVANCED dialog box. Your system is now set for an extended desktop. When it is connected to the screen, you may need to use the function switch key to turn once more on this option, but on systems that I tested, the extended desktop comes just when the monitor is connected. Yet once, I suggested some tests with this mode of knowing how your laptop will perform when connected to an external monitor before coming to speak.

  6. notes that, in this mode, items moved to the extended desktop can be "lost" it if the external monitor is disconnected because they live on the extended desktop is no longer available. Also note that if the extended desktop is turned on, this part of funds 'second' can continue to live, which means that the cursor and the object can be moved off the screen in this sector and not be visible on a single internal monitor. To resolve this problem, do a right-click on the desktop, select Properties, select settings, click on the '2' box and UNCHECK the extend option. Items left on the extended desktop should now align the right edge of the internal display.

  See also: http://windowshelp.microsoft.com/Windows/en-US/Help/16152337-a45c-4a1a-b302-cfd95399ce071033.mspx#EQB

  Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors

  Set up multiple monitors: http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Multiple monitor issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Interruption of the Internet connection

  Original title: I lost the internet connection of mt and I want to know why? and what I can do about it?

  I lost my internet connection and I want to know why and what I can do about it?

  Hello

  1. What is the operating system installed on your computer?

  2. which web browser you are using?

  3. you get any error message?

  4. is it wired or wireless?

  5. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  In the meantime, follow the steps in the below link.

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• Interruption of the internet connection. Says "network can not find proxy address.

  

   
  

  0
  I am connected directly to internet DSL.  Did a system restore and lost my internet.  When I got to the computer it connected to the internet without problem.  Now nothing I try works.  I'm so frustrated... any ideas?  It finds no network and won't let me set up a broadband access.
  Help!      I tried to undo the restoration and, of course, windows cannot do due to a missing file

  Hi TopHatter,

  ·         You try to connect to a Wired or wireless network?
  ·         Recent changes to the computer before the show took place?

  First of all, make sure that explore the Internet proxy settings are not enabled. Follow the steps for this control.

  1. launch Internet Explorer.
  2. click on Tools , then click Internet Options.
  3. click on connections tab and click LAN settings.
  4. make sure that under Proxy Server , none of these options are checked. If something is activated, please the box.

  I suggest you to see if you are able to connect to internet wired to the router.

  If your computer has problems to connect to the Internet or to other computers on a network, try to use one of the network troubleshooting utilities to solve the problem.

  Open the convenience store network by double-clicking the network icon in the tray and then clicking on solving of problems

  Open the Internet connections convenience store by clicking on the Start, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under network and Internet, click connect to the Internet.

  Follow the steps from the link below that may help you solve the problem: Open convenience stores of networking: http://windows.microsoft.com/en-US/windows7/Open-networking-troubleshooters

  using the utility in Windows 7 Network Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If you are unable to connect to your wireless network, and then follow the steps from the link below:

  How can I solve the problems of network card?: http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Interruption of the wireless connection

  I accidentally disabled my wireless internet connection. The message windows cannot configure this wireless connection and a list of connections is no longer displayed. Any suggestions?

  Hi Alex1028

  Assuming you're on Windows Xp, can I suggest that you try the following steps.
  Open network connections by clicking the Start button, click Control Panel, click Network and Internet, and then click on network connections. You can see your network connect listed here. Right-click on it and select on.
  If you use Windows Vista use this link.
  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-a-network-adapter
  For Windows 7, try this.
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  I hope this helps.

• interruption of the wireless connection with the computer laptop and printer

  We have a printer HP6500 we lost the connection Wireless to our Dell laptop.  Whenever we need to print to bring the laptop to the floor and connect it with a cable to print.  I tried to close the printer downstairs next to the laptop and the router but it would not print wireless.  Any other suggestions?  Thank you. CK

  Hello

  Check with HP, their drivers support and online documentation and ask in their forums on any
  known issues. As OEM HP is responsible for the good operation of the printer and provided them with
  drivers.

  More than one 6500 printer
  http://WWW8.HP.com/us/en/support-drivers.html

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Try resetting the printer with the latest drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Interruption of the internet connection with WRT54G

  Have had the WRT54G Router for a few years now and has worked perfectly with a cable modem. Went on vacation for 2 weeks and off the modem router and cable. When I came back this week and through the back on I can no longer connect to the internet from one of my laptops via a wireless router. Can get local access from the laptop to the router but not to the internet. Can connect OK from the laptop to the internet via a direct cable modem. Have tried many things, including the upgrade of firmware, automatic reset installation etc, but cannot establish why it suddenly stopped working.

  Any ideas or suggestions would be welcome.

  Do not use the easy set-up.  You need a wired connection between your router and your computer.  Connect to the router using 192.168.1.1 in Internet Explorer.  Leave the username blank and use admin password.  You may need to clone the mac address.

  Set up your wireless connection.  Change the name of the Linksys network to something else.  Go to wireless security and configure wpa encryption. Write down the settings.  You must enter these settings in your wireless connection.

• Interruption of the internet connection, after reset.

  When I run the diagnostic tool it says that it cannot find the default gateway.

  I'm looking for someone to help me through this

  Hello

  Please answer a few questions to refine the question.

  1. When you say "Refresh", do you mean factory restore? Why exactly did you reset?

  2. What is the brand and model of the computer?

  3. have you recently installed a new hardware before the show?

  4. which antivirus program is installed on the computer?

  Try to manually assign IP addresses as indicated by "V Badji replied on May 7, 2013" in the material provided.

  WiFi access limited, error: "the default gateway is not available.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/wifi-limited-access-ErrorThe-default-gateway-is/d1d72d67-b0bb-405b-b386-52e096c45978

  Hope this information helps. Provide more information so that we can help you.

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Satellite A500: problem with the driver of sound and display after update!

  A500 Windows 7-64 bit

  I download the latest driver (6.0.1.6048) sound and display driver (8.16.11.8973) and I have a few problems.
  The colors are too bright and the sound is too deep (as the middle are too low).

  Hello

  Then why you n t go back to earlier versions of the driver?
  In your case, I would recommend setting the operating system at the point of time at first, until you have updated the drivers.
  Usually, this should help to recover the old drivers again.

  Welcome them

• the WAN connection becomes too slow after you have configured the VPN (Site Site)

  Hello

  I have two branches connected via WAN (MPLS) connection using two 2921 routers.the connection is 2 M.

  I set up a VPN between these two sites, but after the connection has become very slow.

  y at - it something I can do to speed up the speed of connection.

  VPN proposals are:

  Proposals of the phase 1: 3DES, pre-shared,.

  Phase 2 proposals: esp-3des esp-sha-hmac

  I don't think that lower levels of security proposals will add a lot to the speed...

  Hi Marc,

  one thing you should definitely is a hardware encryption go if you do not already tht, it also reduces the load on your cpu

  You can try other things is play with mtu, according to your line mtu and what applications are mainly used. try setting the mtu of at least 60 odd bytes lower than the mtu and also sometimes server line recommended mtu settings like server many have obligation to mtu to 1300 or 1400, if that's not it can cause a lot of re transmissions, you can also try fragmentation before encryption

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/VSPA/configuration/guide/ivmvpnb.PDF