Interruption of the internet connection, after reset.

When I run the diagnostic tool it says that it cannot find the default gateway.

I'm looking for someone to help me through this

Hello

Please answer a few questions to refine the question.

1. When you say "Refresh", do you mean factory restore? Why exactly did you reset?

2. What is the brand and model of the computer?

3. have you recently installed a new hardware before the show?

4. which antivirus program is installed on the computer?

Try to manually assign IP addresses as indicated by "V Badji replied on May 7, 2013" in the material provided.

WiFi access limited, error: "the default gateway is not available.

http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/wifi-limited-access-ErrorThe-default-gateway-is/d1d72d67-b0bb-405b-b386-52e096c45978

Hope this information helps. Provide more information so that we can help you.

Tags: Windows

Similar Questions

  • interruption of the internet connection after installing vista sp2, only a local network

    Hello
    Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
    The internet works occasionally for a short time and when I start in safe mode.
    Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
    I would be grateful for a quick solution, without formatting ;)

    I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
    in the registry, I saw WHAT TCP/IPv6 is already disabled

    my internet actually works, but I don't know why
    I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
    but I do not know why :)
    I hope that my internet is still functional

    Thank you for your support
    concerning

  • I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

    I lost the internet connection after acceptance of your latest updates. How can I cancel the updates?

    Debbie

    How do you know that the loss of your internet connection has nothing to do with the Windows updates? You must find the reason for the loss of the connection.

    How do you connect? Is a wired or wireless with a modem or a router? If a router is the router shared with another computer and this computer can connect to the internet? You need to determine if the problem is a fault on your computer or a failure to connect to your internet access provider?

    What error messages are reported?

    Event Viewer reports

    1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

    2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

    3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

    4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

    5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

    6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

    7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  • Vista 32 bit loses the internet connection after about 10-15 minutes.

    I lose my internet connection after 10-15 minutes.

    The message says local access only.

    The only way to reconnect is to restart the computer.

    I use a devolo home plug network system. It is connected to a 210 of BT router travel.

    I also have a new computer recently bought and installed Windows 7. There is no problem with that.

    Maybe it's a coincidence, but the problem started only since the installation of the new model.


    Hello Cody C.

    Thanks for your reply. I tried this. It is said that the drivers are up to date.

    I go into the settings of power network and checked the box "turn off network card to save energy.

    Since that seems to be OK. Only time will tell if.

    Thanks a lot for all the replies. EXTED

  • Interruption of the Internet connection

    Original title: I lost the internet connection of mt and I want to know why? and what I can do about it?

    I lost my internet connection and I want to know why and what I can do about it?

    Hello

    1. What is the operating system installed on your computer?

    2. which web browser you are using?

    3. you get any error message?

    4. is it wired or wireless?

    5. don't you make changes to the computer before the show?

    Please provide us with more information on this issue to help you best.

    In the meantime, follow the steps in the below link.

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

  • Interruption of the internet connection. Says "network can not find proxy address.

     

    0
    I am connected directly to internet DSL.  Did a system restore and lost my internet.  When I got to the computer it connected to the internet without problem.  Now nothing I try works.  I'm so frustrated... any ideas?  It finds no network and won't let me set up a broadband access.
    Help!      I tried to undo the restoration and, of course, windows cannot do due to a missing file

    Hi TopHatter,

    ·         You try to connect to a Wired or wireless network?
    ·         Recent changes to the computer before the show took place?

    First of all, make sure that explore the Internet proxy settings are not enabled. Follow the steps for this control.

    1. launch Internet Explorer.
    2. click on Tools , then click Internet Options.
    3. click on connections tab and click LAN settings.
    4. make sure that under Proxy Server , none of these options are checked. If something is activated, please the box.

    I suggest you to see if you are able to connect to internet wired to the router.

    If your computer has problems to connect to the Internet or to other computers on a network, try to use one of the network troubleshooting utilities to solve the problem.

    Open the convenience store network by double-clicking the network icon in the tray and then clicking on solving of problems

    Open the Internet connections convenience store by clicking on the Start, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under network and Internet, click connect to the Internet.

    Follow the steps from the link below that may help you solve the problem: Open convenience stores of networking: http://windows.microsoft.com/en-US/windows7/Open-networking-troubleshooters

    using the utility in Windows 7 Network Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    If you are unable to connect to your wireless network, and then follow the steps from the link below:

    How can I solve the problems of network card?: http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • no internet connection after resetting to factory settings

    I have a laptop HP HPG71-449WM.  He has screwed up and wouldn't let me not restore to an earlier point at all so I reset to factory settings.  I don't have a return to the top because there was nothing that I wanted to save.  I can't connect to the internet now, wireless or by connecting an ethernet cable.   It gets an error while going through the initial report put in place where you set your password for the pc, time, etc.  When he arrived at the place to connect to the internet, it gets an error, freezing.  I turn it off and turn it on and it just loads as a normal computer, but impossible to connect to the internet no matter what.  I have reset the settings to factory on 5 times in the last 3 days and get the same problem each time.  I have no recovery disk or whatever it is.

    Hello

    You can use any computer to download EXE files then copy on a USB and then install on your Windows 7 machine.

    Kind regards.

  • Interruption of the internet connection with WRT54G

    Have had the WRT54G Router for a few years now and has worked perfectly with a cable modem. Went on vacation for 2 weeks and off the modem router and cable. When I came back this week and through the back on I can no longer connect to the internet from one of my laptops via a wireless router. Can get local access from the laptop to the router but not to the internet. Can connect OK from the laptop to the internet via a direct cable modem. Have tried many things, including the upgrade of firmware, automatic reset installation etc, but cannot establish why it suddenly stopped working.

    Any ideas or suggestions would be welcome.

    Do not use the easy set-up.  You need a wired connection between your router and your computer.  Connect to the router using 192.168.1.1 in Internet Explorer.  Leave the username blank and use admin password.  You may need to clone the mac address.

    Set up your wireless connection.  Change the name of the Linksys network to something else.  Go to wireless security and configure wpa encryption. Write down the settings.  You must enter these settings in your wireless connection.

  • Windows 8 I lose the internet connection after waking from sleep mode

    My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

    Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

    I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

    Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

    1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
    2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

    * Not sure about my translation of terms/options used above - I am not in an American version

    If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

    + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

    Hope this helps

    See you soon

    LZ.

  • How can I check the internet connection?

    How can I check the internet connection after the launching application?

    Method or property with the value true or false.

    Thank you!

    You don't have to see the 2nd answer, discuss blackberry.system.hasDataCoverage

  • The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection.

    I lose the internet connection

    Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit

    The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection

    Hello

    Control Panel - device - network - manager double-click the used network - power management device
    Tab - uncheck the computer to allow him to turn off the device.

    Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
    Power settings - check the settings there.

    You may reset the default power Plans and and then change them as needed.

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • The Internet connection is lost after installing Windows update

    Original title: put automatic has caused the loss of access to the internet

    After that the last automatic updates have been installed on the 8/17 or 18, I lost the internet connection.

    I had to restore my computer to an earlier date. When it was complete, I had access to the internet.

    I have reset my updates for having me choose when and which ones who.  When I install the updates, how can I know who we are at the origin of the problem.  In addition, how will I be able to solve the problem?

    Hello

    What is the error when you try to access the internet after upgrades?

    Method 1: Update the network drivers

    I suggest to update the network drivers, then try to update and check if the problem persists.

    Updated a hardware driver that is not working properly

    http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

    Method 2:

    We can find the update by installing the updates one at a time, the origin of the problem.

    To do:

    1. click on Start, type windows update and press enter

    2. click on check for updates in the left pane of the window

    3. when updates are found, open the list and select one at a time and install them.

  • No internet connection AFTER startup, but only works during the boot.

    Hi all

    Have a Win XP MCE (Media Center Edition) Dell laptop running.  I can only connect to internet when the system is even start, and I click on the shortcut to IE or Firefox. Once the system completes the startup it connects me to the internet WITHOUT problem & with good signal and good connection speeds.  System connect wirelessly through a Linksys router.

    If I left the initialization of the system ended up - and I'm trying to connect to IE or Firefox - the hourglass appears for a minute and then disappears and I get no connection!

    This means that I must always start the internet connection while system is always initialize, and if I end the connection I get only back to restart system in place and opening connection when appear the icons on the desktop for IE or Firefox!

    I am puzzled by this and have no idea what to do to solve the problem!
    TNX a lot!

    Cindy

    Hello

    • What were the changes made before the issue occur?

    Verify that if the problem exists in Mode safe mode with networking, if the computer works as expected in mode safe mode with networking, and then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. it is a possibility that there is a startup program that is launched with a command line and it appears.
    You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  • Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

    Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

    What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

  • Time Capsule has lost the Internet connection and DNS servers

    I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

    I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

    It may or may not be important to mention the following:

    1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

    2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

    I would be grateful for any advice.

    Weird how everything's going well for a few years and then crazy when you have something will change.

    El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

    Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

    You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

    1. I need to know what modem you are connected. Make and model please?

    2. the most important. What is the main router on your network or a modem?

    I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

    https://discussions.Apple.com/thread/6509420

    It is not so difficult... You just know where you're going before you start.

    Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

Maybe you are looking for

  • failed to connect to the SMTP server

    I can't send mail in ThunderBird sometimes. I use 31.5.0 version but I was wrong this problem in older versions either. It is said:"The message could not be sent because the server name of the SMTP server connection failed. The server is may be unava

  • Closing and re-opening Firefox 4.01 loses the history, why?

    Windows 7, computer Dell Inspiron. In Firefox 4.01 the histiry is here, however, if I close the browser and reopen it the start page shows only in history.

  • Re: Need drivers Vista for Satellite A135-S4467

    Hello I need drivers for Vista and Xp drivers for A135-S4467 laptop, but there is no A135 on the official download for toshiba site. Pls tell me where I can find them and tell me if my lap top can use Win XP. TNX need your quick help you can! Martin

  • Pavilion S5610y motherboard

    My HP desktop computer crashed today. The motherboard is shot and it is a fairly new computer. The repairman told me to contact HP, because there is a known issue with desktop Pavilion. Hp website has information that the company knows that this is a

  • TMS does support group directory user Administration

    Hello I tried to import a group of AD user administration, and I couldn't get any directory listed in the research group. But I can see that security groups are listed there. Is this normal for this security group may not be import of AD Directory gr