Interruption of the internet connection. Says "network can not find proxy address.

Similar Questions

• When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

  When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

  Why would it gives this error at startup?

  It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.

  John

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• I opened a word from Windows Mail document, changed using Word 2007, you press on save and close the document. Now I can not find where he saved.

  original title: Windows Mail ate my file

  I opened a word from Windows Mail document, changed using Word 2007, you press on save and close the document.  Now I can not find where he saved.  I tried the search function in Vista, but it can not find the file either.  I tried to re - open the file in the email, but I just get the original version.  Can anyone suggest where it might be?

  Thank you very much

  Eamonn

  Once you open a Word attachment in an email, you must save it to your HARD drive until you make changes. If you do not, the changes are lost, but the original attachment is still with the e-mail.

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• Interruption of the Internet connection

  Original title: I lost the internet connection of mt and I want to know why? and what I can do about it?

  I lost my internet connection and I want to know why and what I can do about it?

  Hello

  1. What is the operating system installed on your computer?

  2. which web browser you are using?

  3. you get any error message?

  4. is it wired or wireless?

  5. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  In the meantime, follow the steps in the below link.

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

• My laptop can not find IP address

  My laptop (XP) worked in harness wi - fi with my PC (W7) years.  Suddenly, he is unable to find the IP address, even though it recognizes the network and has a strong signal.  Windows repair cannot sort.  I turning the router off & save and verified that the card in the laptop is OK. Cannot use ipconfig on the laptop, because it says media disconnected.  No probs with the PC.  Advice on what I can try would be welcome. Thank you

  Hi David, York

  Thanks for writing about the Microsoft Community Forums.

  According to the description, I see that your laptop is not able to recognize the IP under Windows XP.

  To help you better, please answer these questions:

  1. what IP address you are trying to recognize?

  2. what happens when you try to recognize the IP?

  3 have there been any changes made on the computer before the show?

  I suggest you to follow the article provided to solve the problem:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  You can also disable the third-party security software because it could block the network.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• Interruption of the internet connection with WRT54G

  Have had the WRT54G Router for a few years now and has worked perfectly with a cable modem. Went on vacation for 2 weeks and off the modem router and cable. When I came back this week and through the back on I can no longer connect to the internet from one of my laptops via a wireless router. Can get local access from the laptop to the router but not to the internet. Can connect OK from the laptop to the internet via a direct cable modem. Have tried many things, including the upgrade of firmware, automatic reset installation etc, but cannot establish why it suddenly stopped working.

  Any ideas or suggestions would be welcome.

  Do not use the easy set-up.  You need a wired connection between your router and your computer.  Connect to the router using 192.168.1.1 in Internet Explorer.  Leave the username blank and use admin password.  You may need to clone the mac address.

  Set up your wireless connection.  Change the name of the Linksys network to something else.  Go to wireless security and configure wpa encryption. Write down the settings.  You must enter these settings in your wireless connection.

• When I try to record photoshop mi account, there is a problem with the internet connection and I can't continue. How can I solve it?

  I bought a book on Photoshop CS many years ago, and once I installed it in my computer it says I should I enroll the account in order to use Photoshop (or something similar), and it also has a link to go directly to the website of the registry. The problem comes when I try to access this link given, which is an internet link. It appears that my Internet connection is not secure, so I'm not allowed to continue the process, even if I don't really no problem with the connection. As I'm talking about an older version of Photoshop CD, the problem might be that something related to the incompatibility with my version of microsoft. How can I solve this problem, if there is no possible solution?

  Hello

  You can try to use a different browser for this. You can also save the product key by following the steps

  (1) connect to Adobe.com/accounts

  2) click on the plans and the product.

  3) click view your products.

  (4) enter your serial under register no. your products

• Interruption of the internet connection, after reset.

  When I run the diagnostic tool it says that it cannot find the default gateway.

  I'm looking for someone to help me through this

  Hello

  Please answer a few questions to refine the question.

  1. When you say "Refresh", do you mean factory restore? Why exactly did you reset?

  2. What is the brand and model of the computer?

  3. have you recently installed a new hardware before the show?

  4. which antivirus program is installed on the computer?

  Try to manually assign IP addresses as indicated by "V Badji replied on May 7, 2013" in the material provided.

  WiFi access limited, error: "the default gateway is not available.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/wifi-limited-access-ErrorThe-default-gateway-is/d1d72d67-b0bb-405b-b386-52e096c45978

  Hope this information helps. Provide more information so that we can help you.

• My iphone 6 will not update of the iOS and says it can not be restored

  After crossing the steps, it says that it cannot update the phone and also cannot restore. Does anyone have an answer plase.

  Frenchterry wrote:

  After crossing the steps, it says that it cannot update the phone and also cannot restore. Does anyone have an answer plase.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Windows 7 64 bit laptop on wireless network can not find .inf wired for Canon Pixma iP4000 printer driver for windows 7 32 bit PC

  First of all, I read the thread on the laptop win 7 and win XP PC with attached IP4000.  I have just isn't helping me with that.  I am computer literate network, but I have to be dumbing down, so be specific in a response, you can give it.  Please, do not assume I know something just because it can be public knowledge.  Thank you for understanding my situation!

  New Win 7 64 bit laptop connected wireless to a network home through a Netgear WNDR3700 router.  Wired to the router, it is a PC with a USB attached printer Canon IP4000.  This printer has worked without problem with this PC for years.  Add the laptop.  Try to access the printer on the network (it is set to be shared on the PC) translates into an inability to find the driver for the printer.  On the Canon download site, I downloaded and installed on both machines the driver add-on 'aomwin110ea23us.exe '.  This does nothing to solve the problem.  Then, follow the suggestions in the thread referenced above, I downloaded installed 7 - zip and unzipped the file add-on from Canon.  Guess what? -There is no, zero, nada, stupid ".inf" file in there!  I understand that I need share on the PC to both x 32 and x 64, but without a valid .inf file to point to, I'm sunk.  And the same is true when you try to add the printer to the laptop - not to point to .inf file.  Is the only thing that I have not tried to install the printer directly to the laptop via the USB port, and it's because this is not a configuration that is usable for me.  The printer must be attached to the PC.  Is there anyone out there who can help me solve this dilemma?  Please do not give me an answer telling me to download the driver - usually you tell me precisely what driver and then guide me through the process.  Rest assured that I appreciate sincerely any help you can give me.  Thanks in advance!

  Most likely the name of the driver you are using on XP to share the printer a is not not the name of the 64-bit driver.  The pilots names must match in order to add the printer as a connection to the 64-bit computer using the normal RPC protocol.  You can configure the printer on 64-bit Windows 7 as a local printer that will basically copy the data from the printer to the format to share on the XP machine using SMB protocols.

  This is a Ko for incompatible drivers when connecting XP to NT4.  Replace your server / client configuration, but it's the same process.  Make sure that you are connected to the internet and select the Canon 64 bit driver available on Windows Update (use the Windows Update button in add printer) http://support.microsoft.com/kb/282842

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• I had a window on my computer asking if I wanted to upload a new version of Firefox, but I thought I'd go to the site and now I can not find

  Y at - it a Firefox update? If so, how can I find it on your Internet Mozilla site?

  Go to Firefox / Help / about Firefox. the program will check
  and if there is an upgrade, do the download. Often automatic.
  You can also go directly to the web page; http://www.Mozilla.org/
  and download from there for a clean copy.

• zd7020us - wireless connection is disabled - can not find how to enable it

  laptop computer (large) zd7020us... Operating system: XP pro.  Drive hard hase been replaced twice.  Wireless, used to work to find the last time that it was used.  but, it need not for a long time and hard drive past and reloading the operating system, it did not work now for a long time.  message I get when I poke the wireless power button: map your 802.11 radio network is always disabled. Use the radio control in wireless network utility to enable it. "* I HAVE downloaded all the files to update from HP for this computer and installed right after installnig the BONE when the drive has been replaced. * I HAVE been at network connections, "Wireless network connection" - and all that I get the window int is - "Windows cannot configure this wireless connection"...  If you have activated the anither program to manage this wireless connection, use that software. "I've been to the Services section and activated ' Wireless Zero Configuration (WZC)... but there is nothing for... so... now me what?  Thank you... I hope...

  Hello testrat.  I understand that a problem the reactivation of your wireless card.  Is this correct?

  The error message that you received on another utility used to configure the device is probably the cause of your problem.  This looks like a software application to manage wireless connections is your wireless card hostage.  You will see to set Windows to control the connection.  You will need to determine what program is currently set to manage the wireless.

  I'll need to go to the Add/Remove programs in your control panel section.  Sort the list by name and look for anything with the name of 'Intel' or "Broadcom."  What do you see that these two brands are concerned?

  I'm waiting for your answer.