Interruption of the USB connection when restarting a computer

When the computer restarts, two USB DAQ devices are not visible in LV or MAX.

To get these devices (USB-6210 and cDAQ 9211 with single chassis USB) for you sign up, I need to disconnect and reconnect the.

Is there a way to get the LV to see devices without physically breaking and the USB connection?

Carmen,

It is a problem that we have seen previously, mainly when the OS loads, all the material is detected. In some cases USB devices are detected, but the BONE did not complete its driver loading process, causing a race condition. You are able to recover only when supply you either cycle the USB device or disconnect and reconnect the device.

I had read the following article which explains how to force windows to delete and detect a USB device.

http://digital.NI.com/public.nsf/allkb/1D120A90884C25AF862573A700602459

Then I would create a batch file that runs each time the computer starts.

Tags: NI Software

Similar Questions

  • lose the usb port when restarting

    My laptop suddenly lost all the USB ports. I can uninstall the USB hubs and restart and Windows will load the drivers and recognize the USB ports and any connected equipment. Everything will work as usuall until I reboot then have all usb ports stop working. I've updated my Bios and latest drivers available from the manufacturer (Dell), I am running XP home and that you have installed all updates.

    Hi Zmanomore,

    ·         You also update the chipset drivers?

    Method 1: Check if the chipset drivers update is available. If so, the same day and check for the issue.

    Method 2: You can try running the fixit in the following article and see if it helps.

    USB port may stop working after you remove or insert a USB device

  • Interruption of the USB connection

    I lost my connection to my printer. I uninstalled the printer & now I can't reinstall. I can't get past the connection of the USB cable from the installation. The problem started when I tried to print a document. I tried a new USB cable, used a different usb port, up date my printer driver & done a check dates to my PC. Nothing is for my printer back. Can anyone help?

    Hi Jess a Dennis,.

    I see that you are unable to re - install the printer.

    If you have problems installing a printer, or if you have added a printer but are unable to use it, you need to maybe install or update the printer driver so that it is compatible with the version of Windows you are using.

    1. What exactly happens when you try to reinstall the printer? What is the error message?
    2. What is the brand and model of the printer?
    3. The printer is getting detected in Device Manager? This reflected there an error message?

    Check this link for:

    Open the Device Manager

    http://Windows.Microsoft.com/en-in/Windows-Vista/open-Device-Manager

    Now, you can check if the installation of the printer is configured properly. Check out the following link to do the same thing:

    Note:

    Completely remove the previously of the drivers printer or patches the computer and try to install it is fresh.

    Add or remove a printer

    http://Windows.Microsoft.com/en-in/Windows-Vista/add-or-remove-a-printer

    You can also check these links:

    Find and install printer drivers

    http://Windows.Microsoft.com/en-in/Windows-Vista/find-and-install-printer-drivers

    Install a USB device

    http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-USB-device

    If the problem persists, or you need help on Windows let us know.

  • I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

    I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

    original title: third party INF problems

    Hi Paul,.

    ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

    You can see the following article on how to set up a network.

    How to set up a small network with Windows XP Home Edition (PART 1)

  • Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

    Original title:

    My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

    I get a windows notification that says-

    "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

    I have Vista 32 bit OS on my laptop.

    My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

    I tried to look for a download of update on the site of Logitech & only found:

    6.32.20 set - point it did nothing to help.

    I also tried to move the receiver to the other 2 ports USB w / still the same results.

    Are there other downloads or solutions that will help w / this problem?

    You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

    Also try the steps below to reset the power of USB:
    (a) the laptop off, unplugged from the wall outlet.
    (b) remove the battery for a few minutes, then reinstall it.
    (c) then restart the laptop.

  • Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

    Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

    WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

    Try the following steps please

    The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

    1. Check if the problem is related to a single device and if other devices connect normally-
    2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
    5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
    9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.
  • All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

    All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

    Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

  • Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

    Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

    What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

  • iMac loses the internet connection when I turn off wifi

    Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

    I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

    Desktop computer is connected to the modem.

    Model name: iMac

    Processor name: Intel Core i7

    Processor speed: 3.4 GHz

    Number of processors: 1

    Total number of Cores: 4

    (By heart) L2 Cache: 256 KB

    L3 Cache: 8 MB

    Memory: 4 GB

    Any ideas? Thank you

    You can use an ethernet cable between the modem (= the internet connector) and the iMac.

    WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

  • Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

    Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

    You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

  • The "USB connection Mode" option is missing!

    I can't change the USB connection mode: after plugging in the USB cable to the PC in the 'Settings' icon screen House. > connection device > USB connectivity > here I am showed only three options:

    1 install the software

    2-device USB detect and

    3 - Dieberson for connecction with a USB device.

    Can someone help me please find the possibility to choose between (MSC) and the mode of connecting USB (MTP)?

    All mobile phones only has this option but not my Z5C. Help, please.

    Hi Prodave,

    Please see the following Thread.

    http://talk.sonymobile.com/T5/Xperia-E4/MSC-or-USB-mass-storage-mode-without-root/m-p/1070290#M1291

  • How to disable the autostart (application) when restarting the server managed?

    Hi Ppl,

    How to disable the autostart (application) when restarting the server managed?

    I want that some apps do not stay started. In WebSPhere, we have an option to disable auto-start for the application.

    I don't find in weblogic.

    Thank you

    You can force stop the application before you restart the server.

    -Faisal

    http://www.WebLogic-wonders.com

  • Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

    Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

    I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

    How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

    Hi LOliver,

    Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

    Method 3: Connect the printer to a different USB port and check.

    Method 4: Reinstall the USB (Universal Serial Bus) controllers.

     First of all, please disconnect all USB devices and then perform the following steps:

    (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

    (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

    (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

     

    Then, restart your computer and windows will automatically reinstall all USB controllers.

     

    HP printer drivers- ensure that you download the driver appropriate for your device model package.

     

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." Why it does not recognize my device?

    Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive.  Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  Why he says this?  And what can I do about it if anything?  I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing.  So I don't know what is happening or how to fix it.  Please help me!

    Hi Carla,.

    Please go to the Microsoft Community Forums.
    After the description of the question, I understand that you can not use the mouse on the computer wireless.
    Let me go ahead and help you to question
     
    What is the brand and model of the mouse?
     

    Here are some ways you can follow to resolve the problem:

    Method 1:
    Try to connect to other USB port and verify.
     
    Method 2:
    I suggest for the link and follow the steps in the article:
    Troubleshoot a wireless mouse that does not correctly
     
    Method 3:
    Remove and reinstall all USB controllers
    Follow these steps:

    a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

    b. click on the hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.


    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
  • one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

    I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
    kindly help

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

Maybe you are looking for