InterVideo WinDVR 3 on Qosmio G30-116 via port-> no audio video

Similar Questions

• Qosmio G30-116: how to connect to the Sky Digital box to watch TV?

  I recently bought the Qosmio G30-116, with the understanding that I can connect my digital Sky to the laptop (somehow) and watch and record the sky on the laptop

  * note: I do not use TNT or TV I'm on SKY DIGITAL *.
  SINA the converter cable provided to connect the video in on the laptop (video is like a headfone Jack and converter converts to this female RCA/RCA)

  I connected on the laptop and then connect a RCA 3 SCART toward it then in the area of the sky, when you set up the TV section in Windows Media Center, I followed the instructions until it gets to the point where it scans a signal, (before that I wonder what kind of signal that I receive, I select digital but have tried all combinations in) but it does not find a signal.

  Now I was told that Windows Media Center doesn't support analog input and the connection between the sky and the laptop is analog.
  Is this correct or not? then, while typing this I learned by someone else that my laptop is not capable of receiveing SKY DIGITAl as it cannot decode or something. Is that also correct? If not, can what am I doing wrong, and someone help me to get it going? And I go about it the right way or I'm quite the wrong way if the laptop is capable of it?

  Hi Liam

  AFAIK if you are using an external receiver (sat receiver or even sky digital box) the laptop can bring out just what external device send to the laptop. You can connect your external case to the laptop using composite to the port (transfer of video and audio signals). After that, you can start Qosmioplayer and analyze the available channels.

  You will find a program, but the different channels, you must select the box itself. If a channel must be registered, use Qosmioplayer save option.

  The same must be possible with WMCE. I'm not 100% sure but I also think that the connection between laptop and Skype is analog.

  Sorry, but that's all I know about Qosmio. I tested it with Qosmio G20.

• Qosmio G30-116: TV button - where is it?

  Hello everyone.
  I would like to ask questions about the (Tv) button in the qosmio G30-116. Do not I have it on my blue (AV) button on the keyboard.
  I tried to play station 2 on the G30-116 but it doesn't work unless through media center which is really slow and bad.

  My friend has a G20, he bought from the United States, and it has a button "Tv in" and when it connects (play station2) through D-video or video, simply press that button, then there a live inistent Tv that is faster than the media library.
  As far as I know because in media center, the game will be very slow?

  G30 suppouse to be better than the G20. Why there is no Tv-in button? Where we can press on and play or watch the sky or anything like that, speed of the media center boring?

  Why should I use media center to play (play station) while G20 users WHOSE!
  I contacted toshiba and they said your are going to ring me tomorrow or the day after, but if I found that this Tv-in support dosen't G30 series!

  Could someone correct me if I'm wrong please, this question is open for all the qosmio but especially for those with the G30.

  Thanks to you all
  Naïve

  Hello

  I think you're wrong.
  I put t found information about the Qosmio G30-116, but on the Qosmio G30-134.
  But I guess that these two units are similar.
  Check your user manual that was preinstalled on your laptop.

  However, the Qosmio supports the monitor button. This is the second on the right.
  The Qosmio player should start. There, you can choose between TV mode, CD or DVD. I think you need the TV mode.
  You should also check your right connection. I suppose that you use the right cable and the composite port (monitor of).

• Upgrade to Vista Edition Home Premium on Qosmio G30-116

  I thought I had covered until after I started the upgrade of power. To see that there are still several drivers who did not prpoerly including the video card.

  Also the test under icons was blurred. I tried several different approaches with clear Type etc. and increasin size but not luck.

  1. What is the best advice for the upgrade? is it still worth in waiting for toshiba to produce a package
  2. What are the recommendations for the establishment of siplays of Vista?

  Hello

  First of all you need to know what are the right drivers for you unit.
  It seems that the Qosmio G30-116 is a part of the PQG30E series. So if you're going to download all of the drivers that you must choose that number in the download form pilot!

  I checked the Toshiba page and unfortunately, I didn't find that several drivers for Vista as RAID driver or stack of BT.

  However, it seems that you must update the BIOS before installing Vista.

  But now for you questions:

  > 1. What is the best advice for the upgrade? is it still worth in waiting for Toshiba to produce a package
  Well, I would recommend install clean Vista separately on a second partition.
  And Yes, if you want to use the whole functions to wait for Vista drivers

  > 2. What are the recommendations for configuring Vista displays?
  After the version of the graphics driver you should simply install it. The driver will choose the best settings.

• Qosmio G30-116: Tv tuner chipset on Linux

  Hello

  I have Linux loaded on a Qosmio 30-116

  A LSPCIlists a lists a Conexant 5b7a peripheral, would I be right in thinking that it is a tv tunner?

  The same device is classified in the www.pcidatabase.com video 0x5B7A, MPEG, decoder, Multi-Media 0x14F1 Conexant Systems, Inc..

  any comment anyone?
  Dave.

  Hello

  Unfortunately, the Toshiba doesn t supports the Linux operating system.
  However, some the Qosmio G30 was delivered WITH TNT TV Tuner + analog hybrid.
  In this case on the Toshiba Recovery CD, driver TV tuner came preinstalled.

  I guess you also need a tuner TV especial for Linux driver, but as I said there is no drivers for Linux ;(
  In my opinion there is nothing to see.

• Linux on Qosmio G30-116

  Someone tried to install Linux on this machine, if so, which version was it?

  I tried Suse 10.0 and 9.2, they bailed out with a disk controller error.

  Dave.

  Hi Dave

  The Qosmio G30 is the newest device and I think you're one of the first users with this device. I have no much experience with Linux, but I think you have this problem because of the RAID driver to be installed at the beginning of the installation of the OS.

  Unfortunately Linux is not supported by Toshiba and I really don t know if Toshiba can offer a solution for this.

  Good luck!

• Possible problem HARD drive - by clicking on the sound and the system hangs on Qosmio G30 - 116

  Hello

  I just got my G30-116 return of service (replacement of the screen) and after 2 days another problem. He just continues to hang out.

  I do not change a thing since I got it and now it just stop working on things sometimes like browsing the internet. It has not happened before. And my biggest concern is the trigger that made my hard drive.

  What can be wrong? It not crash until I have it sent to the service, I think that my hard drive is defective... Thank you

  What to say? If you can not find out why freeze the problem occurs, try to preinstall the operating system with recovery DVDs delivered.

  In any case, from your description, I'm afraid there is a serious problem with HARD drive and it can be simply worse then now. Please be sure that your data is backed up.

  Please contact service again and explain the situation. If the HARD drive is faulty, you will get a new, and if they have the HARD drive on stock, it can be replaced very quickly. G30 is lovely and I hope that you will be satisfied. A few days ago my friend visited me and we have tested his G30 with HD-DVD player on my LCD TV. I can tell you one thing: I am really impressed with the HD picture quality.

  Good luck!

• Setting up RAID1 on Qosmio G30-116

  Y at - it guides regarding the implementation of raid 1 on model G30-116.

  Are there hidden traps or pitfalls I should know about?

  Hello

  Usually after a change of the RAID option, you have to reinstall the entire operating system! Because you will have lost all the data!
  As far as I know, you can change the RAID in the BIOS on the 3rd page

  Please also read the information contained in the user manual. There you should find the details.

  It is also a very interesting announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14349&MessageID=52361

• Need Vista drivers for display on Qosmio G30-116

  Hello everyone, need some advice.
  I have updated Windows XP MCE for Vista 32-bit, but the display won't full 1920 x 1200, as it was when I had XP installed MCE.

  All I can get is 1440 x 900.

  I downloaded the drivers Toshiba from Vista but do not seem to fix.

  Can someone help?

  Thank you very much

  brand

  It's quite strange. Pilots usually proposed are tested and it should work. You use the 7.15.10.9813 version?

• Difference between Qosmio G30 - 162 and G30-116

  Hello

  What is the difference between these two machines, with the denomination of sale, they have the same sound

  Hello

  Check out these pages and compare these two units

  Qosmio G30-162:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=UK&PRODUCT_ID= 116151 & DISC_MODEL = 0 & toshibaShop = false

  Qosmio G30-116:
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=EU&PRODUCT_ID= 114051 & DISC_MODEL = 0

• Qosmio G30 - shaded black lines on the screen

  Hello

  I bought the Qosmio G30-116. Great set, but it is a question. On the bottom of the screen there are two dark outline shaded (the brighter the background color is more wisible it gets.)

  It is very annoying, I bought it mainly for movies. I took it to the shop where I bouth it but they said it is normal and have all the toshiba 17 "screen. But I saw 3 other models with 17 "(qosmio résolution reste la même) and none of them did."
  What should I do? Is it really normal? Thank you

  Puuuhhh. Hey pitorek, it's really not easy to tell if it s a malfunction of the display.
  But I think that this question could be answered by an authorized technician.
  I think you should contact the service partner in your country (I guess you are just the Poland ;)) and explain the situation guys.) I think that you need to send this screenshot.

  Eventually, you will get a replacement. But I put t know if it could be an inverter fault or fl display or something different.

• Qosimio G30-116 with blue screen at startup

  I have a bunch of dule Qosmio-Qosmio G30-116 of the start-up in windows generates a blue screen of death, which is quickly erased before I can read what is displayed.
  It starts in windows safe mode results in a long list of files displayed the last being Mup.sys

  Boot Linux and execution of everything I can think off generate no error.

  Connecting the edge dignostics Toshiba BIOS does not generate an error.

  Runs the check memory linux does not generate an error.

  Display of the file system does not generate an error.

  So I don't think I have a hardware problem, I think that something comes with windows

  Does anyone have an idea how to stop my erasing of the screen so I could real know what the problem is?

  There are a lot of valuable software on this machine, I didn't want to trash the entire disk to try to repair what seems to be a specific windows problem.

  Hello

  I think that the BSOD screen information would be very useful for you. The BSOD shows above all a memory dump that is not obvious to a common user.

  Another user has already proposed the question could be linked to the installed windows OS.
  I think he do not since then to study for a long time, who knows what unique application or which parts of Windows cause this problem

  You can try to use the freeware application called CCleaner which may help you clean up the operating system and the registry. This tool helped me in different cases

  But if the BSODS persist then a new install of Windows can help.

• No its Qosmio G30 HDMI connection to audio/video receiver

  When I connect my Qosmio G30-177 via a HDMI cable to my audio/video receiver using Windows Vista Ultimate, I get no sound but great video.
  When I connect the recorder DVD to the receiver (also via the HDMI cable) the sound is OK

  What I need to use the s/pdif interface instead of HDMI to transmit sound to the receiver or is it also possible via HDMI?

  Audio driver:
  Codec high definition audio such of Sigma
  15.12.2006
  6.10.5324.0

  Hello

  I m not an expert but I know the HDMI carry audio signals and video audio.
  Format audio HDMI 1.0 and 1.1 support Dolby DigitalDTS
  HDMI 1.2 supports Dolby DigitalDTS and the DVD-Audio format
  The HDMI 1.3 supports Dolby DigitalDTS, DVD-Audio and SACD audio formats.

  All support standards HDMI a type has (19pol) taken

• Update video card on Qosmio G30-194

  Hi every 1
  I have a Qosmio G30-194
  Can I upgrade the video card?
  And thnx

  Hello

  Please, read here:

  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  So, you see that it's impossible.

  welcome them

• Qosmio G30-102 Optical SPDIF not working not

  I bought the new Qosmio G30-102 and I'm sure that the connector SPDIF optical Out does not work.

  I can't test it now, but I had a couple of SPDIF sound cards and each of them had a red light on all the time, who reported that Optical SPDIF is supported.

  The Qosmio g30-102 definitely supports the audio line in Jack S/PDIF. It s a headphone
  You simply use the right cable!