Introduction to the SCOPE in TestStand step Type
Hello! I am new to NI TestStand and like add a step to 'REACH' Type in a Test - Programm. Can anyone give a short introduction how can I use this type of step? at first, I put a frequency, and the next step must assess these frequencies by the scope. Greetings patrick
Tags: NI Software
Similar Questions
-
I use lv 8.5 and teststand 4.0.
I did a step type custom and recorded at the MyTypes.ini in pallets of type.
I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.
T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.
But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.
Using joint file, how to get the setting custom step type values I put in *.ini?
Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.
Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?
I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.
Everyone knows Q2?
Thank you.
-
Hello world
I'm looking for tips, pointers, directions... to be able to perform this operation in TS 4.0 sequence Editor, if it is still possible...
I am managing a test system with an abstraction of virtual instruments 'home-made' additional layer to IVI classes for instruments that have no defined classes, customization of the sequence editor accordingly for the developers of my Department.
So basically, when the instrument is IVI, the developer uses the built-in type of stage IIA type and when it is not the case, it uses the types of custom step I developed for this particular category of instruments.
However there are classes where I both IVI and available specific drivers and I have to use both in the test sequence.
For example, let's say there are two DC power sources available in the test bench, including a programmable IVI compatible DC power and the other composed of 'blocks' fixed to DC power relay-driven external and you will need to use both in the test sequence.
I want to be able to do in the sequence editor is the insertion of appropriate during the editing just level type by selecting the power source (by a ring or an enum for example) and if the first resource is selected, it inserts the type of stage IIA, and if the second resource is selected, it inserts the appropriate custom step type.
Any ideas on how to achieve this?
Kind regards
Cyril
I don't know exactly when you plan this next prompt, but one option is to create a personalized with a custom step step type named OnNewStep. It will be called when your approach is inserted in the sequence. You can then display the command prompt and replace program step custom in the sequence step type based on the selection of the appropriate user.
-
I am writing a c sharp application to launch a test sequence in TestStand 4.0.1 and then collect the results of the tests to update our own screens / report (s). I'll need some sort of recursive routine to collect the following information (if available) for each stage: name, result, Min value, Max Value, measured value, units.
My attempts have been to an event to end execution allows to collect data:
void EndExecution (sender As object, EndExecutionEvent ev)
{
Results PropertyObject = ev.exec.ResultObject.GetPropertyObject ("ResultList", 0);int numContainers = Results.GetNumElements ();
for (int i = 0; i)< numcontainers;="">
{
PropertyObject resultData = results. GetPropertyObjectByOffset (i, 0);
String testResult = resultData.GetValString ("Status", 0). ToString();PropertyObject testStep = resultData.GetPropertyObject ("TS", 0);
Dim testName = testStep.GetValString ("StepName", 0). ToString();MessageBox.Show (i.ToString () + "". "") testName + "=" + testResult);
}
}But this only gives me MainSequence data.
How to cross the ResultsList tree to access the results of all the test steps?
tlaford,
There are a couple of big problems with what you are doing:
(1) it is best to call the code from a test report of the result of your sequence treatment reminder (just use an action step) or change the process template to call your code rather than to call for EndExecutionEventHandler of the user interface, because if you use Test DUT and then there is a separate resultlist by USE not by execution, and it is generally processed at the end of each use not at the end of execution. If you use the EndExecutionEventHandler then you should NOT use the process templates provided with TestStand because they don't work that way. Instead, you just run your sequences without a process template. Although I really recommend the path of process model, even if you write your own a custom, because it is more flexible, and then hardcode your treatment result in the user interface as you do. A few reasons why a process model is that more flexible or better are that it will work in any user interface, including the sequence editor (no changes to the user interface is needed), and it can do everything you can do in a sequence, for example to call a code module in any language supported , asynchronous sequences, call sous-séquences, etc.
2 recursion) through each property at such a low level is bad because the names of the properties are not guaranteed to be unique for what you expect them to be. Anyone can write their own types step custom with some result properties that they would like. You must make sure that the full path to the properties is what you expect it, and you can even check that the type of step is one you expect. You should rather loop through the result of higher level items ONLY and are looking for the complete data lookupstrings that you expect from these elements. For example, instead of WalkTree you might have the following instead:
This must be called from a step in a test recall report or in a custom process template
rather than from EndExecutionEventHandler of the user interface, because if you use Test DUT then
There is a separate resultlist by USE, not by execution, and it is usually processed
at the end of each use not at the end of execution.
Sub ProcessResultList (PropertyObject resultList)
{
numElements int = resultList.GetNumElements ();
< numelements;="">
{
Element PropertyObject = resultList.GetPropertyObjectByOffset (i, 0);
String stepTypeName = string. Empty;If (point. There are ("TS. ((StepType', 0))
stepTypeName = GetValString ("TS. (StepType", 0);If (stepTypeName is "NumericLimitTest")
{
If (point. Exists ("Limits.High", 0))
{
Double highLimit = item. GetValNumber ("Limits.High", 0);
Do something with the value
}
}NOTE: The two step type SequenceCall and NI_Wait can have subresults like that. A stage of waiting waiting on an asynchronous thread or the execution will have this.
If (point. There are ("TS. ((SequenceCall.ResultList', 0))
{
Recurse for results call sequence.
PropertyObject sequenceCallResultList = item. GetPropertyObject ("TS. (SequenceCall.ResultList', 0);
ProcessResultList (sequenceCallResultList);
}
}
}Hope this helps to clear things up,
-Doug
-
How can I programatically copy/rename a custom step type
Hello!
I worked on a way to pass by programming a file of type palette.ini and copy/rename each step type. Unfortunately, I can't seem to work quite right, and I was hoping to get pointed in the right direction on this one. In case this is useful I use labview to interface with the TestStand API...
I appreciate the help!
Thank you
Matt
Call the following APIs:
(1) myCopyOfAStepType = myStepTypeToCopyReference.AsPropertyObject.Clone ("", PropOption_DoNotShareProperties |) PropOption_CopyAllFlags)
(2) myCopyOfAStepType.Name = "NouvNom".
(3) myDestinationTypePaletteFile.TypeUsageList.AddUsedTypes (myCopyOfAStepType)
(4) myDestinationTypePaletteFile.TypeUsageList.InsertType(myCopyOfAStepType, 0, TypeCategory_StepTypes)
(5) myDestinationTypePaletteFile.TypeUsageList.SetIsTypeAttachedToFile(0, true)
(6) myDestinationTypePaletteFile.IncChangeCount)
' NOTE: in case you are not familiar with the syntax of C, "PropOption_DoNotShareProperties | PropOption_CopyAllFlags"refers to an operation OR these two constants together.
Hope this helps,
-Doug
-
Display a default sous-suite when opening the file in the editor of TestStand sequence
Is there a way to set the default display sequence when open a file of sequence?
Seems that the steps for MainSequence are generally displayed first what existing openning sequence.
How I put it to display an another sous-suite when I open the movie file, I created.
Or if it displays one sous-suite other than MainSequence, how to set this back to display by default when MainSequence reopenning the file in TestStand.
Jeff,
Sequences are stored in files in sequence in the order of 0 - N. The default sequence will be the 0th. To change the order in the sequence editor, you can click on the bar of the above sequence sequences. Keep clicking until there is no arrow on it. He is the true order of the sequences in the file in the sequence. Drag the desired visible upward.
See the image so that you know what I mean.
Hope this helps,
-
The model resource management lots with the flexibility to order step
Hey, the people of Teststand. What is the best way in 2014 Teststand to do this? I'll implement test DUT 4 in parallel using the model of batch processing. The test sequence is in two parts. 2 DUT at a time can run part 1. While 2 DUT are testing part 1, I want to than the other 2 DUT to test of part 2. Then when they are done part 2, wait for part 1 slots become available and then run part 1. And these DUT who had run part 1 all first then work part 2.
Thank you. -Joe
Joe Czapski
Sonos
Boston, Massachusetts (United States)
As I understand it, a step of the automatic planning to the next level would be perfect for this:
Automatic calendar
Use Auto demand resources ("Part 1 - Slot 1", "Part 1 - Slot 2") / / these are two variants different resources
steps that part 1. Use the acquired lock output if you need to know what slotEnd
Use Auto demand resources ('part 2 - Slot 1', 'Part 2 - Slot 2') / / these are two variants different resources
steps that part 2. Use the acquired lock output if you need to know what slot
End
End
-
Manually change the number of test step
I want to be able to change manually ot test step numbers are the numbers in my document reqts for ease of typing in the architecture of sequence files. Is it possible to be able to set the number of test step to say 0010, 0023, 0030, etc. on mine?
I had created a field called Step n that has been identified as an expression in my configuration of list step. Slim, the best thing to do is to embed the number of Test in the step name field as 'Test of resistance T1 USE ID' instead of creating a new separate field for a number because of the menus of teststand way manipulate info flow. Can I have answered my own question...
-
Introduction to the tutorial of curve fitting - curve example of non-linear editing
As stated in my first question, I asked yesterday I'm new to labview and I always work in the curve editing tutorial, but I am now up to the non-linear section (although I jumped the polynomial stuff for now). So my question now to do the with the vi illustrated in Figure 14 of the Introduction to the tutorial Curve Fitting.
My problem this time has do with graphic design for data non-linear Gaussian and adapt. Looks like it gets its data from a cluster of some sort which is itself drawn to clusters separate construction. The problem is that I can't find the appropriate function of cluster, which will result in the production of a graph. I had a test using a variety of different cluster functions and also have a look to try to use a matrix function and none of them work. Now, an assumption that I did is also that the graph is of the form XY (and not a waveform graph).
Note that I am aware that part of the problem could be my lack of experience in coding using labview, as I've attached the vi that I worked on.
I'm using labview 8.6.
Thanks again for any help.
Do not use the function you are using. Use the cluster on each plort bundle, then build the table of these 2 groups.
To the Subvi, you right-click the entry that caused the broken arrow and choose create constant.
Whenever you have a problem trying to find the right data type into a Subvi. Do a right click, create constant. Now, you will have a default constant of the correct data type that you can modify as needed.
-
the server script, line 2610; 2 the argument must be of type table
I get an error message: script server, line 2610; 2 the argument must be of type table.
This message appears on the screen immediately after that I turned on my laptop. Please see the below.
Please advise the possible fix for this problem.
Thank you
To resolve your concern, we suggest that you perform a clean boot on your computer. Perform a clean boot on your computer will help us eliminate software conflicts that could cause this error message. To perform a clean boot on your computer, follow the steps on this link.
Let us know how it goes.
-
Toast not declared in the scope
Hello
I am going through the updated documentation and having problems of implementation of the toast.
void App::showToast() { toast = new SystemToast(this); toast->setBody("Welcome to the BlackBerry 10 Cascades documentation!" + "You have lots of space, but your text will wrap around in the dialog box."); toast->show(); }
Returns an error: "toast not declared in the scope" on this line:
toast = new SystemToast(this);
I've added all these header files to my name .cpp
#include
#include #include #include #include #include #include #include #include #include #include #include using namespace bb::cascades; using namespace bb::system; My .pro includes these:
LIBS += -lbbdata -lbbsystem
My header app.hpp file looks like this
// List with context menu project template #ifndef App_HPP_ #define App_HPP_ #include
namespace bb { namespace cascades { class Application; }} /*! * @brief Application pane object * *Use this object to create and init app UI, to create context objects, to register the new meta types etc. */ class App : public QObject { Q_OBJECT public: App(bb::cascades::Application *app); virtual ~App() {} void showToast(); }; #endif /* App_HPP_ */ Have a blast to find out why its not working. Anyone of you has a working example that connects everything to display a simple toast?
Thank you
I guess you missed the variable declaration.
Declare an SystemToast object in the method itself or in app.hpp like this:
SystemToast *toast;
Kind regards
Nishant Shah
-
Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.
Hi Chaz,
I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.
Please answer these questions to get a better understanding of the issue.
1 have changes made to your computer before this problem?
2 shut down other applications while they are in use?
3. do you get an error code?You can try these methods to check whether the problem is resolved.
Method 1: Run the troubleshooter of app.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Open this link to launch the troubleshooter.
Method 2: Update the application.
Method 3: Reinstall the application.
This link has the steps that you can follow to update and reinstall the application.
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Feel free to use the forum for any other issue of Windows, you may have.
-
It's the kind of best practices of the question type.
I understand, the application parts are available throughout the app Page zero points will be available on the pages where page zero is used. But there are basically the same.
So, outside of the scope, is there an advantage to using application elements vs zero page elements for items that will be used on most of the pages? My use is I have these reference values of almost all the pages and there are some pages that will change the value of this variable. They are not constant.
Thank you!
Do you need constants then? IK them would define as page 0 items that are hidden and cannot be changed otherwise then I would use elements of application to a minimum. For the most part, I also do not recommend 0 page elements, because they are not passed in and out of shape but are only accessible...
In a perfect system, you pass in a page, what suits him and, according to the elements of the application and page elements 0 is dangerous in my mind...
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
Using the function PLSQL return Record Type Index of Tables in ADF
I have a PLSQL function, a return type. My ultimate goal is to take this binary integer index Table and print it on the screen...
CREATE OR REPLACE PACKAGE my_pkg IS
TYPE t_col IS RECORD(
i NUMBER,
n VARCHAR2(30));
TYPE t_nested_table IS TABLE OF t_col;
FUNCTION return_table RETURN t_nested_table ;
END my_pkg;OPTION 1:
1) has anyone got best practices to accept plsql RECORDS returned by a function?
Here is an example.
http://adfpractice-Fedor.blogspot.SG/2013/01/working-with-PLSQL-procedures-in-ADF-BC.html
But it will be a lot of work... first of all accept the results in a loop... then store in a temporary storage can be a few VO or global temporary table and then display them on the page
OPTION 2:
Using the functions PIPLELINED and use in the select statement. While I can use this select statement in the SQL query to create VO... and drag and drop the VO...
CREATE OR REPLACE PACKAGE my_pkg IS
TYPE t_col IS RECORD(
i NUMBER,
n VARCHAR2(30));
TYPE t_nested_table IS TABLE OF t_col;
FUNCTION return_table RETURN t_nested_table PIPELINED;
END my_pkg;select * from table(my_pkg.return_table);
Wow... I'm so smart! .. really possible? who is the best/possible/recommended option?
I'm sure that will be the question most read by many who wants to use PLSQL instead of JAVA to the treatment and CHOSEN to use only to display the output of the PLSQL functions or procedures.
Thank you
Rahul
Dario
Do you mean the scope of the defined Type pkg will be finished?
I created guy outside the pkg as 'Create Type' if it works in this case?
Yes, level objects schema (created with "create or replace type...") can be used in java and this can work.
I think that then the scope of this TYPE will remain until the user session passes.
Object definitions is not worn, but have their bodies.
So, if you instantiate the data level object type schema in a plsql function, scope of this object is this function.
Of course, if you instantiate the object as a variable package, then life of this object is equal to the lifetime of the package (which usually equals life of session db).
Dario
-
Automatically count the total number of steps
I have a procedure with x steps. In the title manually type us the total number of steps. As you can understand this process often translates into a failure, where the number in the title does not match the actual number of steps.
Is there a solution for automatically Indesign to count the steps below a certain style of paragraph and add the title number. I did find something similar.
For example, where '5' in the title is automatically generated:
How to count (5 steps)
- Be patient, start whispering 'a '.
- Then mentally count to two...
- ... three
- ... four
- Crying all of a sudden 'five' and pretend that nothing takes place.
Thanks in advance
This can be done very easily by the script. I wrote it while drinking my coffee in the morning.
Front
After
I don't know what style names that you use so I used 'Header' and 'steps '. Change them to your style of the script name (in a text editor - Notepad for example, ESTK):
If you add / remove certain steps, run the script again and it will update the numbers.
Here is the script and here is an example document for the test.
DISCLAIMER: I did not see your documents, so can't promise it will work for you, as it is.
/* Copyright 2014, Kasyan Servetsky June 4, 2014 Written by Kasyan Servetsky http://www.kasyan.ho.com.ua e-mail: [email protected] */ //====================================================================================== var scriptName = "Count number of steps - 1.1", doc; PreCheck(); //===================================== FUNCTIONS ====================================== function Main() { var foundItem, header, lastPar, num; app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING; app.findGrepPreferences.findWhat = "(?s).+"; app.findGrepPreferences.appliedParagraphStyle = "Steps"; var foundItems = doc.findGrep(true); if (foundItems.length == 0) ErrorExit("Found nothing", true); for (var i = 0; i < foundItems.length; i++) { foundItem = foundItems[i]; if (foundItem.paragraphs.length == 0) continue; header = foundItem.parentStory.paragraphs.previousItem(foundItem.paragraphs[0]); if (header.appliedParagraphStyle.name != "Header") continue; lastPar = foundItem.paragraphs[-1]; num = lastPar.numberingResultNumber; if (num == -1) continue; InsertNum(header, num); } app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING; } //-------------------------------------------------------------------------------------------------------------------------------------------------------- function InsertNum(header, num) { app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING; app.findGrepPreferences.findWhat = "( \\()(\\d+)( Steps\\))$"; app.changeGrepPreferences.changeTo = "$1" + num + "$3"; app.findGrepPreferences.appliedParagraphStyle = "Header"; var changed = header.changeGrep(); if (changed.length == 0) { header.insertionPoints[-2].contents = " (" + num + " Steps)"; } } //-------------------------------------------------------------------------------------------------------------------------------------------------------- function PreCheck() { if (app.documents.length == 0) ErrorExit("Please open a document and try again.", true); doc = app.activeDocument; if (!app.activeDocument.saved) ErrorExit("The current document has not been saved since it was created. Please save the document and try again.", true); Main(); } //-------------------------------------------------------------------------------------------------------------------------------------------------------- function ErrorExit(error, icon) { alert(error, scriptName, icon); exit(); } //--------------------------------------------------------------------------------------------------------------------------------------------------------
Maybe you are looking for
-
Mac lost during the installation of windows
When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition
-
Cannot change the value of mousewheel scroll
After you have reinstalled windows and all I had on my old desktop, I seem to be unable to change my amount of scrolling the mouse on firefox. I looked through all the troubleshooting questions that have already been posted, and all users have respon
-
My phone fell and the phone won't turn on or charge
My phone fell and the phone won't turn on or charge. What is the possible solution?
-
I bought the phoenix Office and would like to know where I can get the background image of a red screen with the image of the Phoenix that sits on all advertising. Can't find it anywhere and here it would be to come preloaded on this PC.
-
Table 4 x 4 in a graph of intensity
Hi, I was wondering if anyone is able to help me? I am doing a 4 x 4 table in a graph of intensity, but at the moment, I can't get a 2 x 8! It's probably something very simple - I have attached the code and a screen shot of this message. Someone at -