Invited with 2 airports network expansion

I have a Time Capsule 802.11ac (used a router with DHCP and NAT) and an extreme recently added as an extension of the network.

I configured the extreme through the Airport utility to expand the networks via a connection time Capsule wireless net of ether. I have configured the router out of the box with the utility Airport a few weeks ago and everything seemed ok. When the update to Airport utility and Firmware was released this week I updated the two airports (now at 7.7.7) and Airport utility.

Who broke the network extended comments. In my opinion, he was working before the update, but it was not much used. After the update, the primary network of comments Time Capsule airport operating normally as before. But when it connects to the network invited by the extreme mode bridge, my devices that all get a self assigned IP. Apparently, broken updates bypass DHCP.

I have reset the extreme at the defaults and it reconfigured several times with Airport utility, but it still does not work.

To summarize the network is Time Capsule (DHCP and NAT) with the network comments-> Extreme (bridge with network feedback mode) connected by ethernet. The main wireless network works on the two airports. The distance between the Airpotrts is 3 floors and about 60 feet, so that they do not interfere with each other and the networks may be extended wireless only via ethernet.

Has anyone another considering also occur after the recent updates? Before?

I contacted Apple support, and so far, they are puzzled. The technicians were not very familiar with the expansion of network of comments and intensified the issue to engineering. I believe that the recent update may have caused the problem, but not sure.

I solved this problem. When you use Ethernet, you must have a direct Ethernet connection between airport expansion and airport router (no switch between the two). Now comments from both airports network functions.

Tags: Wireless

Similar Questions

  • Problem of AirPort Extreme with AirPort Express network expansion

    I have a dual-band Airport Extreme 802.11n that I bought in 2012 which is currently my home wireless network. I am trying to extend the network with a new AirPort Express with the AirPort 6.3.6 utility running OS 10.11 on an iMac. The Airport Express appears in the option other Wi - Fi devices. When I select it, AirPort utility tries to connect and then I get this message "an unexpected error has occurred. Try again. "Try again does not lead to a different result, and I can't seem to find useful information in the documents support or conversations. Any suggestions? Thank you!

    It should be easy enough to operate the express, but you must tell us all the info.

    Configure the Express in the same room as the extreme.

    Using wireless to expand? Then you simply plug power in the Express... and it should pretty much automatically connect to the extreme.

    If you want to extend through ethernet, you should connect the Express in the extreme and make sure that the configuration of the airport utility selects extend by wire.

    If the Mac does not work you have the iphone or ipad and use Airport utility for iOS... it tends to be more reliable.

    Still no luck does your Mac have port ethernet... in this case, you can plug it into the computer with ethernet and try again... more wireless implementation looks like sawing off the branch to that which you are sitting.

  • Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

    I got a modem Comcast/Xfinity upgrade. Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?

    Whenever you change the modem or modem/router on a network, AirPort Extreme will be reset to the default settings and then set it up again to work properly with the new modem. For this he would be...

    Turn on AirPort Extreme for a few minutes... If it is not already turned on

    Hold in the reset button on the back of the AirPort Extreme for 7-8 seconds, then release it.

    Allow a minute for the AirPort Extreme restart to a slow, flashing amber light status

    Make sure that an Ethernet cable connects to one of the four LAN <-->Ethernet ports on the modem/router on port WAN "O" on AirPort Extreme

    To start the Setup program, click the WiFi icon at the top of the screen on your Mac and are looking for a list of the new AirPort base station

    Just below that, click directly on the AirPort Extreme and then follow the prompts for configuration "Wizard".

    When you configure AirPort Extreme once again, you can use the same wireless network name and the same password that you used with AirPort Extreme with the 'old' modem, if you wish, or use a new wireless network name and password

  • Critical Airport network functionality can be enabled to provide access to printers, Apple TV, music player?

    Hello friends,

    Apple documentation says that the network comments feature may be enabled to provide access to users invited to use Internet and restrict them from all the resources of the network.

    I'm curious to know since Apple tags invited with the id VLAN network traffic can something like 1003, guest users will be available still use printers, Apple TV and Hi-Fi connected to the network main Airport via the configuration of the airport utility wireless?

    Thank you

    No, it's all the sense of the guest network... not the LAN access... in the case otherwise you may as well give them full access. Once they access the system printer and music they can access everything.

  • My ipad 3 has stopped communicating with my airport extreme.

    My ipad 3 has stopped communicating with my airport extreme.  I rebooted, both so that made a network reset on the ipad.  He sees the airport but does not connect.  It will work on the personal hotspot on my phone.

    Hello

    If your ipad works with a hot spot that's the Aiirport is the problem

    Go to the Apple Web site

    support. Apple.com

    You may need a software update for airport how old is this do you have another

    Router, you can try?

    See you soon

    Brian

  • Airport network problem

    Today I started having problems with my home network that worked for a couple of years now without any problems. The network is based on a 5th Gen Time capsule as the main with a router number of secondary devices providing a roaming throughout my home network that is to say a 2nd Time Capsule Gen, 2nd Gen Airport Express and 1 st Gen Airport Express all connected by ethernet. The problem my wife initially reported that its Macbook Air was not connected to the internet. When I used the Airport utility to see what is going on he has reported that all secondary devices cannot be found. At the same time, I found that my MacBook and our iPhones and an iPad where no connection to our wifi. I said to THE forget secondary devices and then tried to switch the power to them to see if they would then appear in Airport utility, but without success. If I turn on secondary devices that they do not appear in UA. If I try to use configure other... in UA to access secondary devices it does not appear to be able to communicate with them.

    I don't know if it's relevant or not, but I remember that, on 21 August, I discovered that Time Machine did not all backups since 15 August and I restarted the primary time capsule by activating / deactivating the power. Since then, Time Machine seems to work very well.

    The main time Capsule is set to use back to my Mac.

    Any advice would be much appreciated.

    Apple has had some recent problems with Back to My Mac, which seem to have been resolved, but still there may be consequences.

    For now, please turn off Back to My Mac on the Time Capsule and let all other airports shut down.

    Check that devices can connect to the Capsule of time properly, and that backups are properly trigger.

    Once it's done... and assuming that the devices can connect at the same time Capsule correctly... Turn on only other airports and check to see if the devices can connect to the airport "extended" and also if it will appear in AirPort Utility.

    If so, then start another airport and test the same way.  Continue to turn on airports and tests as you go.

    If the entire network is power back up and running new and get the rear Capsule and work as well as your main Mac. Back to My Mac to reactivate and check that devices can connect to properly Time Capsule.  Then, turn the other airports, one at a time to check each of them before you turn on the other.

    However, if one of the other airports will not work properly or it does not appear in AirPort Utility, then you have to stop at this point and after return.

  • Can I extend my Airport Extreme 6 with an Airport Express A1264?

    Can I extend my Airport Extreme 6 with an Airport Express A1264?

    I've just set up my new Airport Extreme 6.

    I used to have an Airport Extreme 1 (persist, but currently unused).

    • with an Airport Express base station 1 (A1264), which is connected to
      • My usb printer
      • a gadget of cisco to help my ATT cell service

    I can't understand how to add the Express on the network.

    Any suggestion would be appreciated.

    Thank you

    Brad

    The Airport express does not appear as a device listed to select.

  • Airport network - difficulty to its replacement by a component of roaming

    I have a roaming (ethernet) Airport network.

    Cables/modems (UBEE of TW) - Airport Extreme - out ports WAN on Time Capsule and Airport Express (also connected directly to the radio). Configuration, as far as I know, conforms to Wi - Fi base stations: how to install and configure AirPort Express for AirPlay and iTunes - Apple support>

    The Airport express was old and keep people with their streaming music dropped. So I had a new Terminal Airport Express 802.11n.

    I can add it to the network - but as soon as I do, the internet connection goes down. When I remove it, the internet connection is up.

    I can't understand what could be the problem; the old Airport Express does not cause this problem with the internet connection.

    I'm under El Capitan.

    Lisa,

    This type of problem occurs when the Express is first set up to connect to the network using Wireless... .and then the Ethernet connection is applied. In other words, the Express waiting for a wireless connection but it also gets an Ethernet connection... and this creates a massive feedback loop that effectively blocks the network.

    Please, try the following:

    Turn on the Express for a minute or two

    Maintain in the reset on the back of the Express button until you see the yellow light starts to Flash quickly, hold a few seconds when it occurs, and then release the reset button. Give the Express a full minute to restart again.

    Make sure that Ethernet network cable is connected to the "O" on the Express WAN port

    Click the WiFi icon at the top of the screen of the Mac, and then click directly on the AirPort Express Terminal to start the configuration "Wizard". The first screen that appears resembles the illustration below, except that you will see your devices and the network name is displayed.

    Type a short and simple name that you want to use for the Express

    Click next

    Now, look at the following screen to confirm that the Express is set up to extend using Ethernet. It is the confirmation that the Express will be configured correctly.

    When you see the message Setup is complete, click done.  And you're done.

  • Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

    Hello

    I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

    No writable calendars are configured for the invitations with the provider for Google Calendar.

    My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

    I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

    What can I do? Is there a solution for this?

    Thank you!
    Daniel

    Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
    In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
    You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
    Or you may want to try CalDAV.
    https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

  • How can I change the physical address associated with my Airport Extreme

    I moved, but when I look for devices by using find my iPhone devices connected to my Airport Extreme base station seem to be at my old location. How to upgrade the physical address associated with the Airport base station?

    To the best of my knowledge, there is no way for the user to do. Finally, the database of Apple will update. There is some anecdotal evidence of that having an iPhone connect to airport speeds the process.

  • I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

    I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

    I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

    Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

    The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

    Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

  • NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

    NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

    Hi BSRC$, in stock

    1. You have security software installed on the computer?
    2. You receive an error message when you restart the computer?

    Reinstalling Windows XP to the factory setting would not be the first option.

    It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

    I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

    How to remove Windows XP Service Pack 3 from your computer

    http://support.Microsoft.com/kb/950249

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

  • I'm trying to change the ownership of directories/files with a domain network environment (using takeown)

    I'm changing the ownership of files/directories with a domain network environment. Using takeown /f \\server\share/r/a/dy. It works fine but when I check the property is actually on my administrative account as the owner. I'll need for administrators to be owner and not mine administrative account. Can you please help?

    Thank you

    RG

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for support on Windows Server. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver

  • Error message: a problem with your wireless network card

    Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

    Your wireless card has stopped working properly.

    There is a network adapter that allows your computer to connect to a wireless network.

    To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have a problem with the wireless network card.

    Hello

    I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

    I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

    "Intel UNDI, PXE - Z.0 (build 082)

    Copyright (C) 1997,1998,1999 Intel Corporation

    VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

    PXE - E61: Media test failure, check cable of

    "PXE - MOF: exit Inel PXE ROM.

    This message appears every time you start and I don't know what he means by "Media Test Failure".

    I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

    Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

    Thanks for any help that anyone can offer :)

    The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

    Enter the BIOS press F2 after initial power on but before the Logo Windows shows

    Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

    In the boot options the LAN card should be removed altogether.

    This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

Maybe you are looking for