Invoke the VCR with the "record" of my application state.

Similar Questions

• Invoke the Smartphone phone/Email application when jumpered

  Hello everyone

  Is it possible to invoke the phone/email playbook smartphone app when it is filled?

  Thank you

  No API or methods have been provided to software publishers.

• FMS 4/AS3: publication works, the record is not

  Hello

  I currently have a problem with FMS4 developer edition (x 64) Linux and Windows XP (x 86).

  When I listen to a webcam using ns.publish ("foobar", "live"), I can watch the stream live on another client, however when I use ns.publish ("foobar", "record"); broadcasting or record works.

  Using the parameter 'live' the client appears in the log files and in the administration as "publication" console, using "record" the client appears as 'idle '.

  I have to configure and more LIVE_DIR in fms.ini?

  Is it a restriction in the developer edition?

  Is there something else I'm missing?

  Here's the relevant part of the code (condensed):

  --------------------------------------------------------------------

  var camLive:Camera = Camera.getCamera();
  var nc:NetConnection = new NetConnection();
  nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
  var ns:NetStream;
  nc.connect("rtmp://192.168.1.63/live/");
  
  function netStatusHandler(event:NetStatusEvent):void {
       if (event.info.code == "NetConnection.Connect.Success") {
            ns = new NetStream(nc);
            ns.attachCamera(camLive);
            ns.publish("foobar", "record");
       }
  }
  

  --------------------------------------------------------------------

  Thanks in advance!

  Fabian Kochem

  Post edited by: fkochem (formatting)

  The problem here is that you are trying to publish recording on demand 'live' - 'live' application is to "live" publishes only and therefore "vod" at the service of video on demand.

  If you want to test the record, create custom applications in the FMS applications folder and try your scenario. Its matter of minute.

  Create a folder named 'test' (give permission if his machine Linux - purposes test gives all 777 permissions). Now just change the URI in your client code to connect to 'test' instead of 'live' - nc.connect ("rtmp://192.168.1.63/test");

  Note: I would say please do give the actual IP address of your machine - just to be on the safe side.

• I can't sync iPhone with iTunes 5s. OK video ist in photos und - but the recorded voice does not work

  I can't sync my iPhone with iTunes 5. OK video ist in photos und - but the recorded voice (Sprachmemos) does not work

  Hello

  Click on these links, they should help you!

  https://support.Apple.com/en-GB/HT201253

  iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  Jack

• Real-time display at the high frequency of data acquisition with continuous recording

  Hi all

  I encountered a problem and you need help.

  I collect tensions and corresponding currents via a card PCI-6221. While acquiriing data, I would like to see the values on a XY graph, so that I can also check current vs only voltage/current / time. In addition, data should be recorded on the acquisition.

  First, I create hannels to analog input with the Virutal DAQmx channel create, then I set the sampling frequency and the mode and begin the tasks. The DAQmx.Read is placed in a while loop. Because of the high noise to signal, I want to average for example every 200 points of the current and acquired for this draw versus the average acquisition time or average voltage. The recording of the data should also appear in the while loop.

  The first thing, I thought, was to run in continuous Mode data acquisition and utilization for example 10 k s/s sampling frequency. The DAQmx.Read is set to 1 D Wfm N Chan N Samp (there are 4 channels in total) and the number of samples per channel for example is 1000 to avoid the errors/subscribe for more of the buffer. Each of these packages of 1000 samples should be separatet (I use Index Array at the moment). After gaining separate waveforms out of table 1 d of waveforms, I extracted the value of Y to get items of waveform. The error that results must then be treated to get average values.

  But how to get these averages without delaying my code?

  My idea/concern is this: I've read 1000 samples after about 0.1 s. These then are divded into single waveforms, time information are subtracted, a sort of loop to sprawl is used (I don't know how this exactly), the data are transferred to a XY Chart and saved to a .dat file. After all that's happened (I hope I understood correctly the flow of data within a while loop), the code in the while loop again then 1000 samples read and are processed.

  But if the treatment was too long the DAQmx.Read runs too late and cycle to cycle, reading buffer behind the generation of data on the card PCI-6221.

  This concern is reasonable? And how can I get around this? Does anyone know a way to average and save the data?

  I mean, the first thing that I would consider increasing the number of samples per channel, but this also increases the duration of the data processing.

  The other question is on the calendar. If I understand correctly, the timestamp is generated once when the task starts (with the DAQmxStartTask) and the time difference betweeen the datapoints is then computed by 1 divded by the sampling frequency. However, if the treatment takes considerable time, how can I make sure, that this error does not accumulate?

  I'm sorry for the long plain text!

  You can find my attached example-vi(only to show roughly what I was thinking, I know there are two averaging-functions and the rate are not correctly set now).

  Best wishes and thank you in advance,

  MR. KSE

  PS: I should add: imagine the acquisition of data running on a really old and slow PC, for example a Pentium III.

  PPS: I do not know why, but I can't reach my vi...

  
  

• We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  Unfortunately, if you have lost the product keys for Microsoft software, you will need to buy new software.  Visit the Microsoft store on genuine Microsoft software.

• Invoke the E-mail with attachment

  Hi guys,.

  IM I invoke the email with a built-in attachment application.
  I read to analyze the data in the JSON Format to the InvokationRequest, but I'm not sure how exactly to proceed.

  Here's what I have so far

  InvokeManager invokeManager;
  InvokeRequest request;
  
  request.setTarget("sys.pim.uib.email.hybridcomposer");
  request.setAction("bb.action.COMPOSE");
  request.setMimeType("message/rfc822");
  
  QVariantMap mail;
  
  mail.insert("to", QUrl("[email protected]"));
  
  request.setMetadata(mail);
  
  InvokeTargetReply *reply = invokeManager.invoke(request);
  

  AFAIK, this should add the address [email protected] mailto-field, but it's not.

  Does anyone know what im doing wrong or what is missing.

  THX

  Smolof

  Sorry for the delay. Here is how I got it working this morning.

  void InvokeEmail::sendEmail() {
      InvokeRequest request;
      request.setAction("bb.action.COMPOSE");
      request.setMimeType("message/rfc822");
      QVariantMap data;
      data["to"] = (QVariantList() << "[email protected]");
      data["subject"] = "This is a subject";
  
      data["body"] = "Hello there, things are great!";
      QString logpath = "/accounts/1000/shared/documents/test.pdf";
      QString logpathEncoded = QString(QUrl(logpath).toEncoded());
      qDebug() << "## LOG PATH: " + logpathEncoded;
      data["attachment"] = (QVariantList() << logpathEncoded);
      QVariantMap moreData;
      moreData["data"] = data;
      bool ok;
      request.setData(bb::PpsObject::encode(moreData, &ok));
  
      m_invokeManager->invoke(request);
  }
  

   

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Initialize the record with constants type

  Hi all

  I need to initialize the record type that has 3 fields with constants.

  Please find the code example:

  DECLARE

  P_rec RECORD TYPE IS

  (

  ID1 VARCHAR2 (50).

  CLID VARCHAR2 (50).

  P_ID VARCHAR2 (50)

  );

  TYPE p_rec_tab IS TABLE OF THE p_rec;

  v_p_rec_tab p_rec_tab

  : = p_rec_tab ((«PA1», '1', «A»),)

  ('PA2', '2', 'B').

  ('PA3', ' 3 ", 'C').

  (WOULD BE "PA4', ' 4 ','),

  ('PA5', '5', 'E')) ;

  number of v_count;

  BEGIN

  v_count: = 0;

  BECAUSE me IN v_p_rec_tab. FIRST...

  v_p_rec_tab. LAST

  LOOP

  v_count: = v_count + 1;

  dbms_output.put_line (' a record number: ' | v_count);

  Dbms_output.put_line (' v_p_rec_tab.id1:' | v_p_rec_tab.id1 (i));

  Dbms_output.put_line (' v_p_rec_tab.clid:' | v_p_rec_tab.clid (i));

  Dbms_output.put_line (' v_p_rec_tab.p_id:' | v_p_rec_tab.p_id (i));

  END LOOP;

  END;

  Exception, I get:

  ORA-06550: line 12, column 24:

  PLS-00306: wrong number or types of arguments in the call to 'P_REC_TAB '.

  ORA-06550: line 11, column 18:

  PL/SQL: Ignored Element

  ORA-06550: line 22, column 13:

  PLS-00320: the declaration of the type of the expression is incomplete or incorrect

  ORA-06550: line 22, column 4:

  PL/SQL: Statement ignored

  Try the below

  SET SERVEROUTPUT ON

  DECLARE

  P_rec RECORD TYPE IS

  (

  ID1 VARCHAR2 (50).

  CLID VARCHAR2 (50).

  P_ID VARCHAR2 (50)

  );

  TYPE p_rec_tab IS TABLE OF THE p_rec;

  v_p_rec_tab p_rec_tab;

  number of v_count;

  BEGIN

  v_count: = 0;

  SELECT * COLLECT in BULK IN the v_p_rec_tab OF

  (SELECT 'PA1', ' 1', 'A' FROM dual UNION ALL)

  SELECT 'PA2', '2', 'B' FROM dual UNION ALL

  SELECT 'PA3', '3', 'C' FROM dual UNION ALL

  SELECT 'PA4', '4', would be "OF double UNION ALL

  SELECT 'PA5', '5', 'E' OF THE double);

  BECAUSE me IN v_p_rec_tab. FIRST... v_p_rec_tab. LAST

  LOOP

  v_count: = v_count + 1;

  dbms_output.put_line (' a record number: ' | v_count);

  Dbms_output.put_line (' v_p_rec_tab.id1:' | v_p_rec_tab (i) .id1);

  Dbms_output.put_line (' v_p_rec_tab.clid:' | v_p_rec_tab (i) .clid);

  Dbms_output.put_line (' v_p_rec_tab.p_id:' | v_p_rec_tab (i) .p_id);

  END LOOP;

  END;

  ----- OR --------

  SET SERVEROUTPUT ON

  DECLARE

  P_rec RECORD TYPE IS

  (

  ID1 VARCHAR2 (50).

  CLID VARCHAR2 (50).

  P_ID VARCHAR2 (50)

  );

  TYPE p_rec_tab IS TABLE OF THE p_rec;

  v_p_rec_tab p_rec_tab: = p_rec_tab();

  number of v_count;

  BEGIN

  v_count: = 0;

  v_p_rec_tab. EXTEND (5);

  v_p_rec_tab (1) .id1: = 'PA1 ';

  v_p_rec_tab (1) .clid: = '1';

  v_p_rec_tab (1) .p_id: = 'A ';

  v_p_rec_tab (2) .id1: = 'PA2;

  v_p_rec_tab (2) .clid: = '2';

  v_p_rec_tab (2) .p_id: = 'B ';.

  v_p_rec_tab (3) .id1: = 'PA3 ';

  v_p_rec_tab (3) .clid: = '3';

  v_p_rec_tab (3) .p_id: = 'C ';

  v_p_rec_tab (4) .id1: = 'PA4.

  v_p_rec_tab (4) .clid: = '4';

  v_p_rec_tab (4) .p_id: = ';

  v_p_rec_tab (5) .id1: = 'PA5.

  v_p_rec_tab (5) .clid: = '5';

  v_p_rec_tab (5) .p_id: = 'E ';

  BECAUSE me IN v_p_rec_tab. FIRST... v_p_rec_tab. LAST

  LOOP

  v_count: = v_count + 1;

  dbms_output.put_line (' a record number: ' | v_count);

  Dbms_output.put_line (' v_p_rec_tab.id1:' | v_p_rec_tab (i) .id1);

  Dbms_output.put_line (' v_p_rec_tab.clid:' | v_p_rec_tab (i) .clid);

  Dbms_output.put_line (' v_p_rec_tab.p_id:' | v_p_rec_tab (i) .p_id);

  END LOOP;

  END;

• There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

  There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

  You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

• For all the records for each record double, I need to get a single column with null or 0.

  Hi all

  I have a requirement where I need to get all the records, for each record in double, I need to get a single column with null or 0.

  create table a1

  (

  Identification number,

  VARCHAR2 (100), the point

  part varchar2 (100));

  Insert into a1

  values (1, 'ABC', 'A1');

  Insert into a1

  values (2, 'DEF', 'A2');

  TABLE A

  PART ITEM ID

  1 ABC A1

  1 ABC A1

  1 ABC A1

  DEF 2 A2

  DEF 2 A2

  3 DEF A2

  O/P

  PART ITEM ID

  1 ABC A1

  1        ABC             0

  1        ABC             0

  DEF 2 A2

  2       DEF              0

  3       DEF              0

  Thanks in advance.

  Thanks for your help FrankKalush...

  This one will work.

  WITH got_r_num AS

  (

  SELECT NVL (a1.id, a1.id) as id

  NVL (a1.item, a1.item) AS element

  NVL (a1.part, a1.part) IN the framework

  a1.id AS a_id

  ROW_NUMBER () OVER (PARTITION BY a1.id

  ORDER BY NULL

  ) AS r_num

  BY the a1

  )

  SELECT id

  element

  CASE

  WHEN a_id IS NOT NULL

  AND r_num = 1

  THEN part

  ELSE ' 0'

  END in the framework

  OF got_r_num

  ;

• Throw the records with null values columns

  Hi all.
  
  Anyone know how to dispose of records containing null column values?
  
  In the target table, I have the set Null option? with "N"... then the process sqlldr load some records. I need to load all of this without the records with null column values. by result, if the field X is null then load the file.
  
  Kind regards.
  
  Published by: ASzo on 05/06/2013 12:37
  
  Published by: ASzo on 05/06/2013 12:38
  
  Published by: ASzo on 05/06/2013 12:42

  load data
  INFILE...
  in the table...
  When x! = ''
  fields completed by...
  (x ...)

• CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  At the same time recording tool was not possible and if you install Adobe Scriptlistener plugin Adobe will disable the recording of the tool its never an option.

  I use and record the actions all the time and was looking forward to the registration tool when Adobe announced it.  But I found what they delivered was very limited because of the restrictions. I don't like that Adobe disables the registration on my machine tool.

  The amount of data that gets reorganized also seems to vary between machines.  I found that Action recorded on a fast machine are not usable on a slow machine.  Recorder fast machine too much data.

  You use this action on the documents must also have the same size and resolution as the document that you have saved the action on. Quite a restriction.

  You can also be foxed in 2014 CC sett here Photoshop CS6 - recording of the clone in an action tool works incorrect on replay.

• I started with LR3 LR4 now LR5, there are now three files, one for each version. Can I remove versions 3 and 4 and just to keep the record of version 5 or do I have all you files?

  I started with LR3 LR4 now LR5, there are now three files, one for each version. Can I remove versions 3 and 4 and just to keep the record of version 5 or do I have all you files?

  do not delete, uninstall, you no longer need.

  as long as your configuration/preferences/catalogues have been migrated or re-setup on lr5, you don't need previous versions.

• How to create and process the Iinteractive report with the records selected in 4.1

  Hello
  
  I want to have an interactive report that will have a check box that can be selected for processing batch in front of each line. Is it possible to do?
  If there is, please provide a method to deal with these cases, i.e. for each selected record, create a new record on another table and update the record as well as the Treaty.
  
  Thank you
  
  Published by: yannisr on July 13, 2012 05:58

  To do this, you must consult the documentation for the APEX for two things

  Create a checkboxes using APEX_ITEM API

  How to reference these boxes in a process to send