Invoke the workflow via PowerShell vCO fails after 5.5.2 set at level

Similar Questions

• Analysis fails after ESXi 4.1 set at level

  I did the upgrade to vCenter 4.1, then Update Manager 4.1 and successfully upgrade to one of the ESXi hosts in my cluster to 4.1. Now, I can't analyze this host improved due to an "unknown error". Nothing has changed in my environment 4.0 such as accounts, IP addresses, DNS, etc.

  Some other posts recommended re-Setup Update Manager 4.1 I did, even if I chose to not to delete my existing information DB. The error still exists.

  VMware has addressed this error with a Ko, or it is indeed because there is no metadata out yet for the 4.1?

  Thank you!

  Here is your answer

  http://KB.VMware.com/kb/1024872

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• Problem invoking the api rest of VCO NSX

  Mary I currently works with VCO and NSX for my license thesis and a few problems when you try to use the api NSX in a VCO workflow.

  I use the built-in VCO which comes with VRA 6.2 and NSX 6.1.3 all living inside a Vcenter 5.5
  I'm just getting started with this and at the moment I just want to create a workflow that performs a GET request to a < nsx-Manager-IP >/api/versions.
  I do this by using workflows of VCO HTTP REST she draws vco.

  First I ran 'add a host REST' and set the URL to < nsx-Manager-IP > who succeeded

  Then 'Add a REST operation' with/api/versions URL model that also succeeds

  To test this, I ran "invoke an operation REMAINS" and selected my newly established operation, that's where I met a wall,

  This workflow fails and throws the exception: connection pool stop (Workflow: call operation of REST / REST call (item0) #6)

  The thing is I'm having a very difficult time to find what means this error, so any help would be really appreciated

  More information:

  I tried to send the same exact request with the Postmaster and who returns the deal answer Yes at least by now I'm pretty sure that the error has something to do with something inside the VCO
  Also I tried to write the address to the Manager of NSX as FULL domain name and it's IP address without change
  Oscar

  Connection pool closing... known, issue install the plug-in here: Technical preview of REST plugin version

  .. You will probably need to re - create your host REST and operations, but after that, your calls should work.

• Invoke the application via a custom protocol URL browser

  With the new breed of OAuth2 API such as Pocket there is now more and more need for apps complement the OAuth2 flow in default browser OS outside the Application. It also means that once the Auth process is complete, there must be a way to invoke app or pass data to browser application via redirect URL.

  Currently it seems achievable on platforms like android by registering a custom for an application URL protocol handler. This way browser can use redirection what custom URL with a Protocol and application would be invoked via redirects and the address bar of the browser.

  I see that current invocation framework supports the URI patterns but I can't make it work, can someone point me to any example of code that allows the invocation of application via browser?

  This sample project should show you what files are used for oauth2 https://github.com/kylefowler/foursquare

• The Activation of Windows 8 failed after BIOS update

  I have a HP Pavilion G6 1313AX laptop with windows 7 Home Basic preinstalled on it.
  I've updated that Windows 8 pro with Wizard upgrade of windows 8.
  After that, I did a BIOS update. Then when I restart, the windows that display an error that the product key was used in some other PC.
  Please help me to solve this problem of activation.

  Try the phone activation:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Access to the administration via VPN to 887 after config setup pro

  Hi all

  Ive just made a three 887w for a client in a few branches, and as this is the first time I have deployed these devices, I decided to go with the GUI (downloaded config pro 2.3) to get the configuration made that I had some constraints of time to get them in place (sometimes I go with the graphical interface first and then look back at the CLI to see what as its been) (, then hand it in Notepad to get a better understanding of the new features of the CLI may be gone and allowed).

  One thing I again, that I was going to do face was my first experience of the firewall IOS area type of config...

  At this point, I'm still unclear on the config (where why Im posting here I guess!) - but the main problem I have at the moment is with managing access to devices.

  Particularly with regard to access to the administration of headquarters inside the IP address of the branch routers.

  I should mention that the branch routers are connected to Headquarters by connections IPSec site-to-site VPN and these connections are all very good, all connectivity (PC server, PC, printer, etc.) is very well... I can also send packets (using the inside of the interface as a source) ping from branch routers to servers on the headquarters LAN.

  Set up access to administration using config pro to allow access to the router on the subnet headquarters (on its inside interface), as well as the local subnet and also SSH access to a specific host from the internet - the local subnet and the only host on the internet can access the router very well.

  I'm not sure if the problem is with the ZBF config or if its something really obvious Im missing! -Ive done routers branch several times previously, so with this being the first config ZBF I did, so I came to the conclusion that there must be something in the absence of my understanding.

  Any help greatly appreciated... sanitized config below!

  Thanks in advance

  Paul

  version 15.1
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  encryption password service
  sequence numbers service
  !
  hostname name-model
  !
  boot-start-marker
  boot-end-marker
  !
  logging buffered 51200
  recording console critical
  enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxx
  !
  No aaa new-model
  !
  iomem 10 memory size
  clock timezone PCTime 0
  PCTime of summer time clock day March 30, 2003 01:00 October 26, 2003 02:00
  Service-module wlan-ap 0 autonomous bootimage
  !
  Crypto pki trustpoint TP-self-signed-2874941309
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2874941309
  revocation checking no
  rsakeypair TP-self-signed-2874941309
  !
  !
  TP-self-signed-2874941309 crypto pki certificate chain
  certificate self-signed 01
  

  no ip source route
  !
  !
  DHCP excluded-address IP 10.0.0.1 10.0.0.63
  DHCP excluded-address IP 10.0.0.193 10.0.0.254
  !
  DHCP IP CCP-pool
  import all
  Network 10.0.0.0 255.255.255.0
  default router 10.0.0.1
  xxxxxxxxx.com domain name
  Server DNS 192.168.xx.20 194.74.xx.68
  Rental 2 0
  !
  !
  IP cef
  no ip bootp Server
  IP domain name xxxxxxx.com
  name of the server IP 192.168.XX.20
  name of the server IP 194.74.XX.68
  No ipv6 cef
  !
  !
  Authenticated MultiLink bundle-name Panel

  parameter-card type urlfpolicy websense cpwebpara0
  Server 192.168.xx.25
  source-interface Vlan1
  allow mode on
  parameter-card type urlf-glob cpaddbnwlocparapermit0
  model citrix.xxxxxxxxxxxx.com

  license udi pid xxxxxxxxxxx sn CISCO887MW-GN-E-K9
  !
  !
  username xxxxxxx privilege 15 secret 5 xxxxxxxxxxxxxxxxxxxxx
  username privilege 15 secret 5 xxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx
  !
  !
  !
  !
  synwait-time of tcp IP 10
  !
  type of class-card inspect correspondence sdm-cls-VPNOutsideToInside-1
  game group-access 106
  type of class-card inspect entire game SDM_SHELL
  match the name of group-access SDM_SHELL
  type of class-card inspect entire game SDM_SSH
  match the name of group-access SDM_SSH
  type of class-card inspect entire game SDM_HTTPS
  match the name of group-access SDM_HTTPS
  type of class-card inspect all match sdm-mgmt-cls-0
  corresponds to the SDM_SHELL class-map
  corresponds to the SDM_SSH class-map
  corresponds to the SDM_HTTPS class-map
  type of class-card inspect entire game SDM_AH
  match the name of group-access SDM_AH
  type of class-card inspect entire game SDM_ESP
  match the name of group-access SDM_ESP
  type of class-card inspect entire game SDM_VPN_TRAFFIC
  match Protocol isakmp
  match Protocol ipsec-msft
  corresponds to the SDM_AH class-map
  corresponds to the SDM_ESP class-map
  type of class-card inspect the correspondence SDM_VPN_PT
  game group-access 105
  corresponds to the SDM_VPN_TRAFFIC class-map
  type of class-card inspect entire game PAC-cls-insp-traffic
  match Protocol cuseeme
  dns protocol game
  ftp protocol game
  h323 Protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  inspect the class-map match PAC-insp-traffic type
  corresponds to the class-map PAC-cls-insp-traffic
  type of class-map urlfilter match - all cpaddbnwlocclasspermit0
  Server-domain urlf-glob cpaddbnwlocparapermit0 match
  type of class-card inspect entire game PAC-cls-icmp-access
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  class-map type urlfilter websense match - all cpwebclass0
  match any response from the server
  type of class-card inspect correspondence ccp-invalid-src
  game group-access 100
  type of class-card inspect correspondence ccp-icmp-access
  corresponds to the class-ccp-cls-icmp-access card
  type of class-card inspect sdm-mgmt-cls-ccp-permit-0 correspondence
  corresponds to the class-map sdm-mgmt-cls-0
  game group-access 103
  type of class-card inspect correspondence ccp-Protocol-http
  http protocol game
  !
  !
  type of policy-card inspect PCB-permits-icmpreply
  class type inspect PCB-icmp-access
  inspect
  class class by default
  Pass
  type of policy-card inspect sdm-pol-VPNOutsideToInside-1
  class type inspect sdm-cls-VPNOutsideToInside-1
  inspect
  class class by default
  drop
  type of policy-card inspect urlfilter cppolicymap-1
  urlfpolicy websense cpwebpara0 type parameter
  class type urlfilter cpaddbnwlocclasspermit0
  allow
  Journal
  class type urlfilter websense cpwebclass0
  Server-specified-action
  Journal
  type of policy-map inspect PCB - inspect
  class type inspect PCB-invalid-src
  Drop newspaper
  class type inspect PCB-Protocol-http
  inspect
  service-policy urlfilter cppolicymap-1
  class type inspect PCB-insp-traffic
  inspect
  class class by default
  drop
  type of policy-card inspect PCB-enabled
  class type inspect SDM_VPN_PT
  Pass
  class type inspect sdm-mgmt-cls-ccp-permit-0
  inspect
  class class by default
  drop
  !
  security of the area outside the area
  safety zone-to-zone
  zone-pair security PAC-zp-self-out source destination outside zone auto
  type of service-strategy inspect PCB-permits-icmpreply
  zone-pair security PAC-zp-in-out source in the area of destination outside the area
  type of service-strategy inspect PCB - inspect
  source of PAC-zp-out-auto security area outside zone destination auto pair
  type of service-strategy inspect PCB-enabled
  sdm-zp-VPNOutsideToInside-1 zone-pair security source outside the area of destination in the area
  type of service-strategy inspect sdm-pol-VPNOutsideToInside-1
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  ISAKMP crypto key address 194.105.xxx.xxx xxxxxxxxxxxx
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  map SDM_CMAP_1 1 ipsec-isakmp crypto
  Description Tunnel to194.105.xxx.xxx
  the value of 194.105.xxx.xxx peer
  game of transformation-ESP-3DES-SHA
  match address VPN - ACL
  !
  !
  !
  !
  !
  interface BRI0
  no ip address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  encapsulation hdlc
  Shutdown
  Multidrop ISDN endpoint
  !
  ATM0 interface
  no ip address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  No atm ilmi-keepalive
  !
  point-to-point interface ATM0.1
  Description $ES_WAN$
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  PVC 0/38
  aal5mux encapsulation ppp Dialer
  Dialer pool-member 1
  !
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  wlan-ap0 interface
  description of the Service interface module to manage the embedded AP
  IP unnumbered Vlan1
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  ARP timeout 0
  !
  interface GigabitEthernet0 Wlan
  Description interface connecting to the AP the switch embedded internal
  !
  interface Vlan1
  Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$
  the IP 10.0.0.1 255.255.255.0
  IP access-group 104 to
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  IP nat inside
  IP virtual-reassembly
  Security members in the box area
  IP tcp adjust-mss 1452
  !
  interface Dialer0
  Description $FW_OUTSIDE$
  IP address 81.142.xxx.xxx 255.255.xxx.xxx
  IP access-group 101 in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  NAT outside IP
  IP virtual-reassembly
  outside the area of security of Member's area
  encapsulation ppp
  Dialer pool 1
  Dialer-Group 1
  Authentication callin PPP chap Protocol
  PPP chap hostname xxxxxxxxxxxxxxxx
  PPP chap password 7 xxxxxxxxxxxxxxxxx
  No cdp enable
  map SDM_CMAP_1 crypto
  !
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  !
  IP nat inside source overload map route SDM_RMAP_1 interface Dialer0
  IP route 0.0.0.0 0.0.0.0 Dialer0
  !
  SDM_AH extended IP access list
  Note the category CCP_ACL = 1
  allow a whole ahp
  SDM_ESP extended IP access list
  Note the category CCP_ACL = 1
  allow an esp
  SDM_HTTP extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq www
  SDM_HTTPS extended IP access list
  Note the category CCP_ACL = 0
  permit any any eq 443 tcp
  SDM_SHELL extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq cmd
  SDM_SNMP extended IP access list
  Note the category CCP_ACL = 0
  allow udp any any eq snmp
  SDM_SSH extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq 22
  SDM_TELNET extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq telnet
  scope of access to IP-VPN-ACL list
  Note ACLs to identify a valuable traffic to bring up the VPN tunnel
  Note the category CCP_ACL = 4
  Licensing ip 10.0.0.0 0.0.0.255 192.168.xx.0 0.0.0.255
  Licensing ip 10.0.0.0 0.0.0.255 10.128.xx.0 0.0.255.255
  Licensing ip 10.0.0.0 0.0.0.255 160.69.xx.0 0.0.255.255
  !
  recording of debug trap
  Note category of access list 1 = 2 CCP_ACL
  access-list 1 permit 10.0.0.0 0.0.0.255
  access-list 23 allow 193.195.xxx.xxx
  Note access-list 23 category CCP_ACL = 17
  access-list 23 permit 192.168.xx.0 0.0.0.255
  access-list 23 allow 10.0.0.0 0.0.0.255
  Access-list 100 category CCP_ACL = 128 note
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip 81.142.xxx.xxx 0.0.0.7 everything
  Access-list 101 remark self-generated by SDM management access feature
  Note access-list 101 category CCP_ACL = 1
  access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq 22
  access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq 443
  access-list 101 permit tcp host 193.195.xxx.xxx host 81.142.xxx.xxx eq cmd
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq telnet
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq 22
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq www
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq 443
  access-list 101 tcp refuse any host 81.142.xxx.xxx eq cmd
  access-list 101 deny udp any host 81.142.xxx.xxx eq snmp
  access-list 101 permit ip 160.69.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  access-list 101 permit ip 10.128.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  access-list 101 permit ip 192.168.xx.0 0.0.0.255 10.0.0.0 0.0.0.255
  access-list 101 permit udp host 194.105.xxx.xxx host 81.142.xxx.xxx eq non500-isakmp
  access-list 101 permit udp host 194.105.xxx.xxx host 81.142.xxx.xxx eq isakmp
  access-list 101 permit host 194.105.xxx.xxx host 81.142.xxx.xxx esp
  access-list 101 permit ahp host 194.105.xxx.xxx host 81.142.xxx.xxx
  access list 101 ip allow a whole
  Note access-list 102 CCP_ACL category = 1
  access-list 102 permit ip 192.168.xx.0 0.0.0.255 everything
  access-list 102 permit ip host 193.195.xxx.xxx all
  access-list 102 permit ip 10.0.0.0 0.0.0.255 any
  Note access-list 103 self-generated by SDM management access feature
  Note access-list 103 CCP_ACL category = 1
  access-list 103 allow ip host 193.195.xxx.xxx host 81.142.xxx.xxx
  Note access-list 104 self-generated by SDM management access feature
  Note access-list 104 CCP_ACL category = 1
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq telnet
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq telnet
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 eq on host 10.0.0.1 22
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq 22
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq www
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 eq to host 10.0.0.1 www
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq 443
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq 443
  access-list 104 permit tcp 192.168.xx.0 0.0.0.255 host 10.0.0.1 eq cmd
  access-list 104 permit tcp 10.0.0.0 0.0.0.255 host 10.0.0.1 eq cmd
  access-list 104 tcp refuse any host 10.0.0.1 eq telnet
  access-list 104 tcp refuse any host 10.0.0.1 eq 22
  access-list 104 tcp refuse any host 10.0.0.1 eq www
  access-list 104 tcp refuse any host 10.0.0.1 eq 443
  access-list 104 tcp refuse any host 10.0.0.1 eq cmd
  access-list 104 deny udp any host 10.0.0.1 eq snmp
  104 ip access list allow a whole
  Note access-list 105 CCP_ACL category = 128
  access-list 105 permit ip host 194.105.xxx.xxx all
  Note access-list 106 CCP_ACL category = 0
  access-list 106 allow ip 192.168.xx.0 0.0.0.255 10.0.0.0 0.0.0.255
  access-list 106 allow ip 10.128.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  access-list 106 allow ip 160.69.0.0 0.0.255.255 10.0.0.0 0.0.0.255
  Note category from the list of access-107 = 2 CCP_ACL
  access-list 107 deny ip 10.0.0.0 0.0.0.255 160.69.0.0 0.0.255.255
  access-list 107 deny ip 10.0.0.0 0.0.0.255 10.128.0.0 0.0.255.255
  access-list 107 deny ip 10.0.0.0 0.0.0.255 192.168.xx.0 0.0.0.255
  access-list 107 allow ip 10.0.0.0 0.0.0.255 any
  Dialer-list 1 ip protocol allow
  not run cdp

  !
  !
  !
  !
  allowed SDM_RMAP_1 1 route map
  corresponds to the IP 107
  !
  !
  control plan
  !
  !
  Line con 0
  local connection
  no activation of the modem
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  line vty 0 4
  access-class 102 in
  privilege level 15
  local connection
  transport input telnet ssh
  !
  Scheduler allocate 4000 1000
  Scheduler interval 500
  NTP-Calendar Update
  130.159.196.118 source Dialer0 preferred NTP server
  end

  Hi Paul,.

  Here is the relevant configuration:

  type of policy-card inspect PCB-enabled

  class type inspect sdm-mgmt-cls-ccp-permit-0
  inspect

  
  

  type of class-card inspect sdm-mgmt-cls-ccp-permit-0 correspondence
  corresponds to the class-map sdm-mgmt-cls-0
  game group-access 103

  
  

  type of class-card inspect all match sdm-mgmt-cls-0
  corresponds to the SDM_SHELL class-map
  corresponds to the SDM_SSH class-map
  corresponds to the SDM_HTTPS class-map

  
  

  type of class-card inspect entire game SDM_SHELL
  match the name of group-access SDM_SHELL
  type of class-card inspect entire game SDM_SSH
  match the name of group-access SDM_SSH
  type of class-card inspect entire game SDM_HTTPS
  match the name of group-access SDM_HTTPS

  
  

  SDM_SHELL extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq cmd
  SDM_SSH extended IP access list
  Note the category CCP_ACL = 0
  permit tcp any any eq 22
  SDM_HTTPS extended IP access list
  Note the category CCP_ACL = 0
  permit any any eq 443 tcp

  
  

  Note access-list 103 self-generated by SDM management access feature
  Note access-list 103 CCP_ACL category = 1
  access-list 103 allow ip host 193.195.xxx.xxx host 81.142.xxx.xxx

  The above configuration will allow you to access the router on the 81.142.xxx.xxx the IP address of the host 193.195.xxx.xxx using HTTPS/SSH/SHELL. To allow network 192.168.16.0/24 access to the router's IP 10.0.0.1, add another entry to the access list 103 as below:

  access-list 103 allow ip 192.168.16.0 0.0.0.255 host 10.0.0.1

  This should take enable access to this IP address for hosts using ssh and https. Try this out and let me know how it goes.

  Thank you and best regards,

  Assia

• No alerts on the iphone when it is locked after updated 9.2.1 to level

  Hello world. Since I upgraded my iPhone iOS 9.2.1 I don't get more iMessage or SMS notifications when my phone is locked. My iPad is becoming like my Apple Watch notifications, but the phone does not vibrate or play the sound signal. The screen also doesn't appear when the message arrives.

  Oddly enough when my phone is unlocked the notifications occur, which means that I hear the sound of incoming text.

  I checked all the basics like providing notifications for messages is configured, do not disturb is turned off and the phone is not cut. I tried to disable the notifications and restart the phone and then the reactivation. I also tried a hard reset of the phone as well.

  I know that this right broken after the put 9.2.1 update so TI changed tweaks, I'm not aware of the or there is a problem with the output. Everyone knows about this problem? Anyone know what is the most important a fix?

  Thank you!

  pdxor_jeff wrote:

  Hello world. Since I upgraded my iPhone iOS 9.2.1 I don't get more iMessage or SMS notifications when my phone is locked. My iPad is becoming like my Apple Watch notifications, but the phone does not vibrate or play the sound signal. The screen also doesn't appear when the message arrives.

  If your phone is locked and you have a Apple Watch and you have a wrist detection enabled, you will get sound/vibration on your phone. You'll get on the watch. This has actually been the case since the watch was released. If you want to get the acoustics/vibration on both devices, you should disable the detection of wrist in the Apple Watch app on your phone. This causes several other disadvantages, including not being able to use Apple pay of your watch and enter a password each time you want to access the watch (another by looking at the main screen).

• Cannot add the license key after ESXi 4.0 set to level

  All the

  AFTER an upgrade successful ESXi 3.5 to ESXi 4.0. I can't add my basic features free license key. Before the upgrade, that I was NOT in trial mode, I had already entered the license key for the basic version of esxi 3.5 several months ago, and things have been fine. Now, after the 4.0 update, I am in trial mode - only now, I'm unable to enter a license anywhere key. If I go into the tab Configuration & gt; Software & gt; A license of features, it is said: evaluation Mode and then if I click on edit - my options are: rename, delete and parameters of the customer, with the first two options are grayed out and cannot. I have the key ESXi 4.0 that I got when I downloaded 4.0 but just can't get anywhere to exit assessment!

  Any ideas?

  Thank you

  There is an another "Edit", you must click on.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Withings App not opening after 9.3.1 set at level

  Since the upgrade to 9.3.1 Withings App of my partner won't answer on his iPad. Home page display briefly, then flips his reduced side, timer works a few seconds then closes its doors. After you have removed and reinstalled as recommended by the always same problem Apple. Keeping Withings App for us both on my iPad I'm not up-to-date.

  It is likely that you don't have a compatible version of your Withings app Apps are supported BY their respective developers. I hope that their support is strong > https://withings.zendesk.com/hc/en-us

• DeskJet 3050j610 will not print after 8.1 MS set at level

  Just updated MS 8.1 and printer hp 3050 has worked after the help of doctor scan. Updated the driver and now it does not print at all. I am not currently active wifi and I use USB to connect.

  Seems he had to update when I added the new Windows driver. Printer, everything has worked very well.

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• Using intermittent problems "invoke the node-&gt; default reset" command to delete a table

  I use the 'default' reinitalization invoke the node to clear a table after sending the data to a file. The next time that the vi is called the table should appear all items, set the default values. However sometimes the picture is not deleted and data since the previous call of the vi are still in the arrary, or at least it appears that way, since the same data for the previous time called appear in the file when new values are added to the file. New data looks good, as the data points in the table that I don't update appear with the old values. And again, it is an intermittent problem. I can solve this problem for a while in any case stop labview and re-run it.  Any ideas what's happening?

  Thank you.

  Chuck

  
  

• How to invoke the playlist of music?

  Hello

  Can I know how to invoke the playlist of music?

  After a long time I found the solution.

  https://github.com/shahumang23/blackberry10sample/

• iCloud preferences hangs (after put 10.11.4 to level)

  I've just updated to 10.11.4 via the update from the drop-down list. This may or may not be the source of my problem because I have no need to access iCloud Prefs for awhile.

  When I try to open iCloud in the System Prefs I get a report entitled 'com.apple.preferences.icloud.remoteservice close unexpectedly. If I have very well the crash report, I enter iCloud prefs but I suspect that I have all of the features.

  I opened ~/Library/Preferences and ransacked everything with "icloud" in the name, then restarted, but the problem persists.

  I try next?

  Thanks in advance,

  Steve =: ^)

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  Then try System Preferences > iCloud.

  
  

  If that doesn't help, restore OS X using OS X Recovery.

  On Safe Mode