iolor gdf 32 program not found... Self-checking to jump...

I got this message... everything I start... I contacted SONY... and 6 times they tried... and still no solution

I contacted customer support online 6 times in the last 2 days in and spent a little more than 5 hours online with them. No one could understand it. The last person, rubin, said the only way to fix this is to do a system restore to the date of purchase. There was no other solution. I hope he reads this

Tags: Sony Computers

Similar Questions

  • Receive the following start-up error message up to: 'sasnative32bddel.exe program not found - skipping autocheck.

    Whenever my computer starts it gets to the 'microsoft corporation' green loading bar then displays this message 'sasnative32 program not found - skipping autocheck. She disappears and start the computer as usual. How can I stop this from happening?

    I am running windows vista business 32-bit

    I found that the... entry sasnative is implemented by Lunarsoft software (I wonder if they are related to Lavasoft).

    If you had a few Lunasoft stuff installed and uninstalled lately, it sounds like it is not cleaned up after himself.  It's the same thing that happens with software Lavasoft - lack of hygiene.

    You must eddt your registry database and change this:

    autocheck autochk *.
    AutoCheck sasnative32bddel.exe

    At the entrance of XP by default, which is the following:

    autocheck autochk *.

    Just position the cursor and delete the entry so it's back to the normal and reboot.

  • "C:\ Windows\System32\Nvcpl program not found"

    Since Sam. 7/16, when I cleaned up my hard drive programs, I keep getting this message whenever I open my PC:

    "C:\ Window\System32\Nvcpl program not found "."

    Apparently, by mistake I deleted this program. Don't have any idea how to restore, HELP!

    This message comes to you NVIDIA video driver software that loads whenever your system is restarted.

    It's broken, but you can fix it.

    I suggest you just reinstalling the NVIDIA drivers as follows:

    The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

    If you have already installed the correct drivers NVIDIA said page, then you should download the drivers anyway and reinstall them yourself.

    It is recommended to run the scan NVIDIA with Internet Explorer.

    Here is the link to the support page NVIDIA for the scan:

    Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

    Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

    If following their indications do not straighten things, then follow these steps:

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
    Click Start, run and enter in the box:


    Click OK, and when the system information summary appears, click Edit, select all, copy and then paste the
    information here.

    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

    This will minimize back Q & A and eliminate guesswork.

    There will be some personal information (such as the user name and the name of the system), and everything seems to be
    information private for you, just delete pasted information.

    When you have the time, I could do that too:

    Perform scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA):
    SUPERAntiSpyware: (SAS):

    They can be uninstalled later if you wish.

  • Property has changed to the admin on my C drive, now laptop won't start. Autochkdsk program not found error

    I changed the property to the admin of all c drive after that my laptop does not start & I get "program not found... autochkdsk. »

    CHKDSK give me access denied
    Impossible to go to "c:" access denied
    restore, repair, nothing works
    I can't take possession of c because I can't access
    I can't access regedit 'C '.
    I have treid it too > but CD does not start

    Hey, try the steps in the given article

  • Blue screen: c000021a autochk program not found

    original title: program autochk not found - skipping AUTOCHK "Followed by BSOD" STOP: c000021a {fatal system error} Session Manager initialization of the system responding ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

    Hello everyone I am desperately need assistance. I'm running under Windows Vista Home Premium 32 bit SP2. The computer is a HP Pavilion Media Center TV PC m7680n.   About 5 days ago my antivirus software, Avira, picked up a malware infection at the site of Windows/System32/drivers/mountmgr.sys. Like a fool, I decided to delete the file and call it a day, but the second that I made my computer immediately deleted and I was forced to close. When I started again, I was greeted with this error message 'autochk program not found - skipping AUTOCHK', which was then followed by a container BSOD:

    STOP: c000021a {fatal system error}
    The Session Manager initialization system process ended unexpectedly with the status of 0xc000003a (0x00000000 0x00000000)

    Since then, I tried to boot from any available including the last known configuration safe mode options but I am confronted with the same BSOD and error message and am not able to access the desktop. I also tried all of my drive to Installation of Vista startup repair options, but it says it cannot determine the cause of the problem.

    I also tried to use system restore but it is said that "no restore points were created on your computer's system disk.

    I also tried using the command prompt and enter the command chkdsk with all the options available, but it cannot detect errors or problems. I also tried to use the Bootrec command with all available options, including the reconstruction of the BCD from scratch, but that no longer works. I also tried to use the sfc/SCANNOW command but it cannot start because I get an error message indicating that "Windows Resource Protection could not preform the requested operation." I also tried to replace the file mountmgr.sys since a separate installation of vista through the command prompt by using a floppy disk, but alas it does not solve my situation.

    There are a lot of files and personal information about this computer that I consider valuable for me so please give as much advice and guidance as you possibly can which can help save my OS without having to wipe everything. Also, it's my first time in this forum post, so if I've left out any important information so please let me know and I'll try to give it too you. By the way, I am also what you would call an extreme novice with these sorts of things so be as complete with your descriptions as possible. Thank you.


    Go back and use the troubleshooting guide I posted above - top to bottom. And indeed will need you
    technical help in a real store of the computer (no leeks and glances at a BestBuy or other BigBox
    stores) or system manufacturer support.

    Startup Repair can help.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • pwnative program not found-skipping autocheck

    Hey all

    recently, I used tool Wizard partition via windows 7 to resize my other drive. Its telling me to restart the system to remaining measures through which. To restart, I have lost my Start menu & got two messages after W7 logo;

    pwnative program not found autocheck is ignored.

    CHKDSK program not found autocheck is ignored.

    After the restart of this new system.

    What is the problem?

    I also tried easybcd.exe, goal not the penalty. PL. provides the solution.

    Hi, I know it's too late for you but, I solved this problem finally!, because the last 72 hours, I spend my time searching the Internet for a solution! I try everything I found. I was at a point to throw in the towel, I went 2 discovered things that make me rethink the problem.

    1 pwnative.exe is not a file of Windows 7! is a Native of Partition Wizard that run when they are unable to resize in the graphical interface of Windows.
    2 Wich in mind, the problem can be resolved with a different approach. How Partition Wizard tell Windows which are responsible for its pwnative.exe at the next startup? It change the key of registry HKLM\System\ControlSet001\Control\Session Manager\BootExecute (String Value) adding pwnative.exe to the list of program which will be run on the next load.
    3. I don't know why Windows cannot load this native image, but if you follow this tutorial in seven Forums you can get your Windows 7 online again.
    Or you can try to load "Last good known Configuration" and I think it will be too much work.

    I can't format or install anything and guess what? Partition Wizard did their job.

  • External BB10 Webworks/Cordova opening HTML pages on the device: "this file is not found. Check the URL and try again. »

    Hello fellow people,.

    IM quite in my application of Cordova/Webworks which downloads and save an html file in the SD (

    At this point, the config.xml file is defined as:

    read_device_identifying_informationermit >

    access_sharedermit >

    ermissions >

    Now, I'm trying to open the downloaded html that is saved to file:


    My webapp, I try to open as: (path, _self);

    Where path is the file above (which exists on the device!)

    Path is also, with the + "/ MainFolder/SubFolder/file.html".< of="" that="">

    Also, I get the error:

    This file is not found. Check the URL and try again. If the URL is correct, check that your card is correctly inserted on your device.

    I am running and development off the BB10 Simulator.

    The console does not throw any error that I see.

    Any help or advice would be appreciated.

    See you soon,.


    Well, this is awkward.

    I have myself fixed by adding the string: "file://" on my road.

    I hope that others see it until they are too uptight.

    This has been resolved. Thanks for reading.

  • TURegOpt program not found - skipping AUTOCHECK

    When I restart my pc, sometimes with turegopt program not found - skipping AUTOCHECK. I'm not a fundi pc so it will have to be explained to me as a dummie. Help, please. The pc seems to work normally.

    This means that you have made the mistake of installation of TuneUp Utilities on your pc, and if you have uninstalled a residue was left on the system.

    If you have not uninstalled it do NOW

  • TURegOpt program not found, skipping autocheck on windows 7

    At startup, the following message appears.  TURegOpt program not found, skipping autocheck

    This is after install you some third-party, TuneUp maintenance program?

    Uninstall it.

    These maintenance programs are snake oil

  • sdnclean64.exe program not found - skipping Autocheck

    sdnclean64.exe program not found - skipping AUTOCHECK

    I get this error at the start of Windows 7 Home Premium. Anyway I can get this executable so Windows will do his boot cleaning function?

    Thank you


    Thank you for responding.

    There were known issues with this particular GPU from ATI/AMD.  Surprisingly, the card works fine with an old motherboard Asus, I have in a previous version. Given that the system has an activated copy of Win 7 Ult on it, I still have in service and access it through my main machine via the desktop remotely (product activation and DRM took some of the fun of upgrading material - I see it as an evil necessary.) Companies have the right to intellectual property, but it becomes more expensive to upgrade if you need to buy a new license every time you change on your motherboard). The guys at Asus even suggest to use an older driver for the card on my main machine. I submit all my screenshots and a dersription of the problem to technical support at AMD. If all goes well, they'll find a fix fo as they did for the TLB bug Phenom processors original back in early 2008.

  • After 1st start of P2V "autochk program not found, skipping autocheck" occurs

    I created successfully P2V with VMware vCenter Converter v5.5.3 of my ultimate Windows 7 x 64.

    I use VMware Workstation v11 to launch this new VM and the 1st start successful start-up of windows and start installing the new hardware immediately.

    After finisching, hardware installation windows ask for a reboot.

    On restart I can see the windows startup screen, followed by a black screen with the message "autochk program not found, skipping autocheck" requiring a restart of the system and in a loop.

    I tried the following, which unfortunately has helped:

    1 # URL: KB VMware: virtual machine cloned Windows 2008 R2 fails to start with error: autochk program not found - jump...

    2 # Windows Startup Repair: could not solve the problem.

    3 # CMD with the "Windows System Recovery Options" use: /scanos or /rebuildbcd Bootrec Bootrec (both train "could not find OS"), bootsect/nt60 all/MBR (it did not help)

    4 # URL: Startup Repair recovery loop - Windows 7 Help Forums (aka return of the previous registry, which did not help)

    In all my attempt I am trying to solve the effect, but I think I'm going in the wrong direction, because I need to solve the cause of the problem.

    Who is that, at the first start, VM changes something that translates into a corrupt windows registry.

    Someone who has experience in what could help me solve this problem.

    Very much appreciated.

    Long search without result, but eventually I found the cause and solution.

    In a nutshell: virus scanner

    More words:

    The physical machine was preinstalled Norton Internet Security before I started the process P2V with VMware vCenter Converter.

    Because I was not near the machine, started the client VM for the first time.

    In a short time between when windows starts and the forced reboot (which cannot be prevented) I have management uninstall Norton Internet Security. Doing so windows crashed on BSOD, rebooted with the request to start SafeMode or normal, I choose normal startup. After that, everything worked very well, without any problems, even when I rebooted windows several times Afterwords.

  • Error "Update server is not found" when checking for updates

    I'm using VMware Workstation 8.0.5.

    I also had the following problem with 8.0.4 but NOT with 8.0.3: when you try to check the updates, I constantly get an error message:

    'The update server is not found. Check your Internet settings or contact your system administrator.

    There is nothing wrong with my Internet settings. I tried to paste the URL of the update server, i.e.

    in Internet Explorer and it appears a page. However all links on the page return an error "page cannot be found '...

    Please notify.

    Kind regards


    As in the image below show 8.0.5 is not yet on the server to update the software! (I even if I told you that in the thread in the release notes.) does not yet exist.

  • TURegOpt program not found-skipping autocheck * pc reboots *.

    It indicates that the program cannot be found jumping the uatocheck and the pc reboots please help!

    Hi david allan_20,.
    Here's a similar post on this issue. Follow the suggestion posted by "Malkeleah" at "2/13/2010-4:38:12 AM" to solve this problem:
  • msln program not found autocheck not done

    I ran a Norton 360 Preview on my Compaq laptop and had several things happen.

    First she wiped my Palm Desktop.  I got this in service.

    My new Verizon Wireless MI-Fi will not properly install even if the previous version ran perfectly on this computer.

    Finally and most importantly, when the laptop starts up, I get the message this program msln found autocheck not done.

    How can I get this fixed?  Norton can fix it, or I have to wipe the system and reinstalling Vista?

    Joanne Scanlon

    MSLN is a program that Norton uses to remove the malware at startup. He left the entry in the register once the program has been removed. You can modify the registry to remove this topic; See:

    If you do not want to edit the registry yourself, contact Symantec support for advice.

  • Auto check program not found. My nx6110 keeps rebootting every 30 seconds automatically.

    I used an unsecure site, and I think I downloaded a virus.  This happened after I had my PC cleaned.

    Hello ramsey28,

    Thank you for visiting the Microsoft answers community.

    This problem occurs because the Autochk.exe file is damaged or missing.

    To resolve this issue, follow these steps:

    1. Insert the Windows XP startup disk, and then close the Welcome to Microsoft Windows XP window, if it appears.
    2. Click Start, click run, type cmd, and then click OK.
    3. At the command prompt, type the following command and press ENTER.
      copy letter:\i386\autochk.exe %WINDIR%\system32 disc

      Note The drive letter placeholder represents the drive, for example "D:", that runs the Windows XP startup disk.

    4. Enter Y when you receive the following message is displayed:
      Overwrite C:\WINDOWS\system32\autochk.exe? (Yes/no/all):
    5. Remove the Windows XP startup disk and then restart the computer.

    For all KB on this issue, please click here.

    Hope this helps

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • HP ENVY Desktop - 750-167c: HP recovery media creation

    I recently bought a HP Envy desktop computer and I tried to create a recovery media and I get a message saying that the partition does not exist. The machine is Factory reconditioned.What are my options to move forward. I'm guessing that the mahcine

  • "View or print the homegroup password '+' does not.

    "View or print the homegroup password '+' does not.

  • Running Java?

    On the news today, they say I should stop using Java and uninstall it. How will this affect my XP Home Edition?

  • Dual monitor - not compatible with this signal TV

    original title: dual monitor Hello! I connected my laptop to my LCD TV and chose the option to only display on the external monitor.  Unfortunately I get the error message on my TV "not compatible with this signal.  Because it does not work and I can

  • USB 3.0 for XPS 8000

    I have a 3 TB external hard drive, which is nice and fast on USB 2.0 but I think would be really Cook on 3.0.  When I shop for a card, there is mention of a power supply to the motherboard (5V)?  I can't find where that is specified in my manual etc.