IOM 11.1.1.5.0 Configuration of the generic UNIX BP02 connector problem

I have a survey concerning the configuration of the generic UNIX connector on 11.1.1.5 to IOM. Basically, when I try to do the first Recon and Shell Recon group, I get an error saying:

Oracle.iam.connectors.icfcommon.exceptions.IntegrationException: The value of a [Host] key is not defined in the plan provided.

I followed the connector guide UNIX documentation and has also created an attribute in the OIM Design Console called privateKey [LOADFROMFILE] that contains a value of file:\\\home\oracle\Oracle\Middleware\Oracle_OIM1\server\ConnectorDefaultDirectory\SSH\config\oim_rsa.

I also tried to set up a user with UNIX resources but I get an error message saying:

CREATEUSER running
Target class = oracle.iam.connectors.icfcommon.prov.ICProvisioningManager
< 2 July 2012 18:20:32 PHT > < error > < ORACLE. IAM. CONNECTORS. ICFCOMMON. Prov. ICPROVISIONINGMANAGER > < BEA-000000 > < oracle.iam.connectors.icfcommon.prov.ICProvisioningManager: createObject: error while creating user
oracle.iam.connectors.icfcommon.exceptions.IntegrationException: the value of a [Host] key is not defined in the plan provided.
at oracle.iam.connectors.icfcommon.util.MapUtil.getRequiredValue(MapUtil.java:94)
at oracle.iam.connectors.icfcommon.ConnectorFactory.createConnectorFacade(ConnectorFactory.java:122)
at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:133)
at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:141)
at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.createObject(ICProvisioningManager.java:253)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpUNIXCREATEUSER.CREATEUSER(adpUNIXCREATEUSER.java:109)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpUNIXCREATEUSER.implementation(adpUNIXCREATEUSER.java:54)
at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2917)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:547)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(tcProvisioningOperationsBean.java:4042)
at Thor.API.Operations.tcProvisioningOperationsIntfEJB.retryTasksx (unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
to $Proxy329.retryTasksx (Unknown Source)
at Thor.API.Operations.tcProvisioningOperationsIntfEJB_4xftoh_tcProvisioningOperationsIntfRemoteImpl.__WL_invoke (unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at Thor.API.Operations.tcProvisioningOperationsIntfEJB_4xftoh_tcProvisioningOperationsIntfRemoteImpl.retryTasksx (unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
to $Proxy167.retryTasksx (Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
to $Proxy328.retryTasksx (Unknown Source)
at Thor.API.Operations.tcProvisioningOperationsIntfDelegate.retryTasks (unknown Source)
at com.thortech.xl.webclient.actions.ResourceProfileProvisioningTasksAction.retryTasks(ResourceProfileProvisioningTasksAction.java:702)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:76)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>


I would like to ask if there is one configuration step that I missed that causes this error?

Thanks in advance!
Advertisement

Hello

Check in the resource COMPUTER provided you a value for the host.

Concerning
user12841694

Tags: Fusion Middleware

Similar Questions

  • Configuration of the database link Oracle/MySQL problems

    I watched everything I could find on the mistakes I see but I am still at a loss. Basically, I created a link between a DB oracle database (11.2.0.2.0, 64-bit) running on linux and a mysql DB (5.0.45 64) also under linux. The version of the mysql ODBC driver is 5.1.8 - 1 (64-bit) and the version of unixODBC is 2.2.11 - 7.1 (also 64 bit). isql can connect and provides correct results. Connected to the oracle DB, I can run 'select count (*)' on any table of mysql DB. I can also choose tables varchar columns, but the displayed values are strangely short and incomplete. Select all the columns in several lines for most of the tables gives me error ORA-28528 feared. Select specific lines, however, seems to work. Here's a typical session:
    SQL> select count(*) from "status"@mysql;
    
      COUNT(*)
    ----------
         30
    
    SQL> select "name" from "status"@mysql;
    
    name
    --------------------------------------------------------------------------------
    approved
    cancelled
    complet
    configu
    deleted
    Drafti
    editing
    finalized
    hibernat
    initialized
    manual
    
    name
    --------------------------------------------------------------------------------
    not used
    original
    plating
    Prepari
    
    
    
    
    
    
    
    
    name
    --------------------------------------------------------------------------------
    
    
    
    
    
    
    
    
    
    30 rows selected.
    
    SQL> select * from "status"@mysql;
    ERROR:
    ORA-28528: Heterogeneous Services datatype conversion error
    ORA-02063: preceding line from MYSQL
    
    
    
    no rows selected
    
    SQL> select * from "status"@mysql where "name" like 'Drafting%';
    
     status_id
    ----------
    name
    --------------------------------------------------------------------------------
    progress_rank
    -------------
         12
    Drafting Work Order
          1000
    
    
    SQL>
    My files of different settings look like this:

    /etc/ODBC.ini:
    [lims]
    driver=MySQL
    database=lims
    server=dbserv
    port=3306
    user=root
    password=*******
    charset=latin1
    /etc/odbcinst.ini:
    [MySQL]
    Description          = ODBC for Mysql
    Driver64          = /usr/lib64/libmyodbc5.so
    FileUsage          = 1
    $ORACLE_HOME/hs/admin/initLIMS.ora:
    HS_FDS_CONNECT_INFO = LIMS
    HS_FDS_TRACE_LEVEL = 255
    HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so
    HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P1
    HS_NLS_NCHAR=UCS2
    
    #
    # ODBC specific environment variables
    #
    set ODBCINI=/etc/odbc.ini
    set SQL_MODE='ANSI_QUOTES'
    [url http://pastie.org/private/mx2whunhvkknurmcc02qa] Here's a trace for the sql file
    select * from "status"@mysql where "status_id" < 3
    Any help would be greatly appreciated!

    Published by: helgew on August 24, 2011 11:55

    as number of columns is affected, it could be a problem with your odbc manager/odbc is not not fully 64 - bit compatible driver. You don't have compile the ODBC driver manager / ODBC driver manually or did you use a precompiled version?

    Most of the rivers pre-compiled follow the 32-bit ODBC standard rather than 64-bit. To support full 64-bit, you must ensure
    CFLAGS = ""-DBUILD_REAL_64_BIT_MODE ""
    and
    CFLAGS = ""-DBUILD_REAL_64_BIT_MODE ""
    are used to compile a 64-bit driver.

    As an alternative, you can specify in your file init Bridge: HS_FDS_SQLLEN_INTERPRETATION = 32
    forcing 64-bit DG4ODBC not to use the standard 64-bit ODBC and follow the 32-bit declarations.

  • Enabling LDAP synchronization after configuration of the IOM in R2

    Friends,

    Did anyone tried enabling the LDAP synchronization after configuration of the IOM in R2?

    I'm doing the steps the below url.

    http://docs.Oracle.com/CD/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357

    But I'm not finding below.

    / db/LDAPUser
    / db/LDAPRole
    / db/LDAPRoleHierarchy
    / db/LDAPRoleMembership
    / DB/RA_LDAPROLE. XML
    / DB/RA_LDAPROLEHIERARCHY. XML
    / DB/RA_LDAPROLEMEMBERSHIP. XML
    / DB/RA_LDAPUSER. XML
    / DB/RA_MLS_LDAPROLE. XML
    / DB/RA_MLS_LDAPUSER. XML

    Few of them exist in/metadata/iam-features-ldap-sync, but not all. I'm not find LDAPContrainerRules.xml anywhere at all.

    I do something wrong or this documentation is wrong.

    Please suggest.

    Another post, try the following
    I do not have the tiried yet, it seems ok. After your results/experiences, must also try.

    Find the detailed steps in the link below
    http://docs.Oracle.com/CD/E27559_01/install.1112/e27301/OIM.htm#CDDGJIBJ
    http://docs.Oracle.com/CD/E14571_01/install.1111/e12002/oidonly014.htm

  • Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

    Hello

    I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

    No writable calendars are configured for the invitations with the provider for Google Calendar.

    My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

    I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected] @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

    What can I do? Is there a solution for this?

    Thank you!
    Daniel

    Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
    In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
    You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
    Or you may want to try CalDAV.
    https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

  • Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

    We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

    For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

    We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

    So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

    If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

    If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

    One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

    In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

    If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

    Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

    The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

    Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

    Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

    Set up and use Back to My Mac - Apple Support

    Get help using Back to My Mac - Apple Support

    With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

  • Firefox is configured as the default browser, but if I click on a link in MS Word, the link opens with MS Internet Explore. Why?

    Firefox is configured as the default browser, but if I click on a link in MS Word, the link opens with MS Internet Explore. Why?

    I have the same problem, but the difference is in the opening of the MS WORD hyperlinks to download documents (for example http://ntv.spbstu.ru/2011/hss_2011_3.pdf#page=145 ). This link wants to call MS IE.
    At the same time, all the HTML links are opened in FireFox.

  • Configuration of the BIOS XW8600 for SSD and HDD

    Until recently, my xw8600 has been configured with the emulation of SATA under storage on the separate IDE controller Options.  250 GB hard drives connected to the SATA 1 and SATA ports 0 and readers of DVD RW Drive connected to 2 SATA and SATA 3 ports.

    I wanted to install a GTX240 Neutron Corsair SSD, but discovered when I changed the SATA RAID + DCIS emulation (to activate all 5 ports of SATA controller and optimize the performance of the SSD), the system could not find the boot drive.  I checked the startup command settings and found the slot drive HARD listed title module of memory into the attached USB printer HP Officejet 7500 a first and could not be changed.

    I decided to go back to SATA IDE emulation separate, remove the optical drive on SATA 2 port and attach the SSD it.  This facility is expected to start successfully; but after installing windows 7 x 64 on the SSD (Windows XP, x 64, still on the HARD drive), I found Windows 7 has been very very slow.

    Can anyone offer any suggestions or comments on how I can improve this situation?

    Thanks for any help, you can suggest.

    What is an installation of Windows 7 Pro 64 - bit of a retail installation DVD purchase, or something HP?  If I remember well Vista 64 was the latest HP OS with sold.  In this case you won't have to deal with a set of HP restore disks.  I would never do an "upgrade" of a prior installation of OS in W7.  I only do not clean install W7 on a freshly long-type reformatted hard drive or an SSD.  I buy my "system builder" OEM license W7Pro 64 - bit DVD/COA from newegg.com (you can find that many sources and approximately 140.00 each).

    Plan to do a clean install on this SSD from scratch and when you format before that settle does long formatting version, while it is booted from the W7 DVD.  That will take some time.  Or, if you have a functioning before the OS install on a hard drive, you can restore the xw8600 you can connect the SSD in the second or third SATA port and reformat (long version) management of records like this.

    The boot drive or SSD, Spinner, must always be connected to the primary SATA port, which in these workstations, is usually blue plastic, while the rest are a dark black.

    Make sure that your BIOS is later... There was a version for this and the xw6600 with a few months ago.  It is an important.

    Put the SSD in your favorite mount, hang it in the main SATA port, prepare the W7 DVD in the DVD drive (which should be attached to the second port SATA or IDE cable if it's a DVD ATA drive). Throwing xw8600, go straight into the BIOS and go to which you can change the SATA emulation.  Change that on "RAID + AHCI.  Save on the way out of the BIOS, and the workstation will now reboot usually requiring formal approval of the change F1.

    Demarrer start on the DVD, select clean install and things will be fine.  I usually set my boot order to start hard drive/SSD first and second optical drive.  Then, when I load an OS I just use the F9 key during the early start to switch to the DVD player for this single event.

    It's the key information: If you have correctly set to "RAID + AHCI" SATA emulation for the W7 installation process, then the appropriate drivers will not be loaded from the DVD on the startup disk, and you won't receive anywhere near your expected speed.  I helped a friend who had done exactly what you did, and when we corrected things literally double SSD performance scores.  I recommend that the reformatting/clean reinstall from zero here, because you want to really perfect the basics and the way he was treated initially can leave you with a few important questions.

    After you have things working with the SSD and the DVD player you can add in your other material sequentially.  I would like to make a reboot between each addition, just be very careful.  Some old HP DVD drives have a problem with W764 loading during the emulation of the SATA BIOS is set correctly and there is a solution for this, but you don't want from now this info.

    All the advice I have written in this forum about the xw6400 installs apply to the xw6600 and xw8600, including information on the upgrades of the processor.

    Let us know how things are, so that others can enjoy...

  • What is the configuration of the maximum ram for a 2007 iMac 21,5 "

    What is the configuration of the maximum ram for a 2007 iMac 21,5 "

    There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

    (141476)

  • Workstation HP Z240 tour: easy access boot with the configuration of the BIOS?

    Is it possible to have ease of access begins with the configuration of the BIOS?

    Is it possible to have by pressing F10, etc. also start the tool for easy access?

    Is it posible to invert the colors of the BIOS Setup?

    :-)

    If I understand your question, here are the answers

    Is it possible to have ease of access begins with the configuration of the BIOS? This is a feature of Windows, is not available in the BIOS

    Is it possible to have by pressing F10, etc. also start the tool for easy access? See above

    Is it posible to invert the colors of the BIOS Setup? NO.

  • HP Jet 7: My hp stream 7 tab stucks in the configuration of the window has... (a picture of blue background with whi

    My hp stream 7 tab stucks in the configuration of the window has... (a picture of a blue background with white letters) its does not accept the entry while I also use an aotg with the mouse cable. So please help me its very urgent

    Try to hold the low volume button when the power and press the F11 key to enter the menu of system recovery.

  • Configuration of the XBR-65x850c channels - I put the type of signal to the 'cable', but he always comes back to the "antenna".

    I have the TV signal by cable from the TV directly to the output - without cable box.

    Under 'Configuration of the strings' / 'Type of Signal' I choose "cable."

    The works of TV and I watch cable TV.

    I'll be back later in the day and the parameter 'Type of Signal' has changed to 'antenna' and I can see is more channels.

    I change it back and it works until the next time I try to watch TV when I find that it has changed again.

    Someone knows how to keep permanently the setting on "cable"?

    Thank you!

    This problem has been fixed with a recent update.

  • Is it possible with the serial number of an Xserve to read the configuration and the year of production?

    Is it possible with the serial number of an Xserve to read the configuration and the year of production?

    This will show you the model and year: https://checkcoverage.apple.com/

    If a specific configuration (like the 1 TB disk instead of 500 GB for ex) will not be determined. You can only learn by starting the Xserve (or open and look into it.)

  • Re: Is it possible to create the current configuration of the software recovery disk?

    I recently bought A350. Next to the standard software provided by Toshiba, I bought and installed other products such as Norton Internet Security, update all drivers, etc..
    Is it possible to create a recovery disc on my current setup of the software?

    I know the recovery disk, but it will only restore the original configuration of the software. I don't want to go through all the pain of installing other products and update all the drivers.

    I have been using other software like Acronis Disk recovery, but I don't know this recovery cd created by these third party software can be used.

    Everyone has known about this?

    Hello!

    Boyfriend sorry but it is not possible to create a recovery disc with the current configuration of your software. The Toshiba Recovery disk contains the factory settings and t, you can integrate additional software to the image.

    If you want a picture of your laptop with your special software, you need to use another program like Acronis image. So you can make an image of your HARD drive with all your settings and software.

    Good bye

  • Configuration of the keyboard

    Hello Lenovo community,

    After looking on google and on this forum and not being not able to find the answer, I decided to ask for your help.

    Yesterday, I received my Lenovo Y510p and it works well, however, the configuration of the page layout is the Canadian multilingual, which is annoying, but I can live with that.

    However, my question is how to configure it correctly? I tried all the configurations of Canadian keyboard and none seem to match. It could be something missing on windows 8 64-bit home, but I have no idea. Anyone can get noticed on the right track?

    Thanks in advance and let me know if I need to post more information.

    Thanks in advance,

    I found the solution here:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Canadian-multilingual-standard-MA...

  • Configuration of the basic Source of time to master for the 9234

    I have several cDAQ modules I use to collect data.  I use vi to Write can Express to save data to a file of PDM.

    When you examine the recorded data files, the measured data from NI 9215 provide pleasant timestamps to match how the DAQmx task has been set up--delaying the sampling frequency of 1000 with a 1 ms in the While loop.  However, although in the same vi - different tasks, but the same while loop - horodateurs of the NI 9234 do not correspond to the task of DAQmx implemented - sampling frequency of 1000 with a 1ms delay. After reading the material provided with the NI 9234, I found that maybe the machine clean master Timebase Source. There were documents that says he can be configured to be originally of Timebase of Master for the other modules:

    Configuration of the basic Source of time of the master for the NI 9234 (Interface FPGA)

    It is desirable to have the timestamps for data measured across all modules to match. We do not have the FPGA Module for LabVIEW. Is there a method in LabVIEW for all modules use the same master time base Source?  I assumed that because all the data collection has place in the same while loop by using the time delay of 1 ms it was forced through the code. This hypothesis seems incorrect from my review of the PDM data files.

    The NI 9204 provides a trigger only.

    Software:

    Windows 7

    LabVIEW 2010 SP1

    Material:

    CDAQ-9174 chassis

    Slot 1: NEITHER 9204

    Slot 2: NEITHER 9215

    Slot 3: NEITHER 9234

    Slot 4; Vacuum

    Hi MgDAQ,

    An important concept to note is that the 9234 uses a delta-sigma converter and a clock of oversampling to read analog data. There is an inherent delay of entry due to analog and digital filtering built-in. Since the 9215 has a lower resolution there will be a lag the 9234 and 9215 finished. I've included some resources below:

    What are the for the NI 9233, NI 9234, and NI 9237 valid sampling rates? : http://digital.ni.com/public.nsf/allkb/593CC07F76B1405A862570DE005F6836?OpenDocument


    Synchronization of DSA, S and X series devices with a NEITHER-DAQmx single task series: http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument


    Synchronization with NOR-DAQmx of acquiring dynamic signals (DSA) products:http://digital.ni.com/public.nsf/allkb/A133ED27DF9BCC5986256F2E004BA342?OpenDocument

    Have you tried to put two modules in the same spot? Alternatively, you can export the sample clock 9234 and tasks installation separately.

    Best,

    CARISA

Maybe you are looking for


HashFlare