IOM 9.1.0.2 - question of access policies

Similar Questions

• Question on access to multidimensional data Collection

  Hi all

  I have a multidimensional question on access to data using Collections.

  We use Oracle 11 GR 2.

  Our requirement is as shown below

  We get data from upstream via a stored procedure. The procedure store entry variable is a multidimensional complex type.

  I gave below the structure of the collection

  Step 1

  CREATE or REPLACE TYPE feature_type IS OBJECT

  (

  feature_code VARCHAR2 (10),

  feature_name VARCHAR2 (50).

  feature_value NUMBER

  );

  /

  Step 2

  CREATE or REPLACE TYPE feature_array IS TABLE OF THE feature_type;

  /

  Step 3

  TYPE to CREATE or REPLACE the argument subscriber_type IS OBJECT

  (

  subscriber_id NUMBER,

  first name VARCHAR2 (50).

  name VARCHAR2 (50).

  feature_data feature_array

  );

  /

  Step 4

  CREATE or REPLACE TYPE subscriber_array IS TABLE OF subscriber_type;

  /

  Step 5

  CREATE or REPLACE TYPE order_type IS OBJECT

  (

  order_id NUMBER,

  subscriber_data subscriber_array

  );

  /

  Step 6

  CREATE or REPLACE TYPE order_array IS TABLE OF THE order_type;

  /

  Suppose I have a procedure as shown below

  CREATE OR REPLACE PROCEDURE multidimensional_prc (p_dataarray order_array)

  IS

  lv_order order_array;

  BEGIN

  lv_order: = p_dataarray;

  lv_order: =.

  () order_array

  order_type)

  1,

  () subscriber_array

  subscriber_type argument)

  10,

  "Subscribed 10 first name."

  "Subscriber 10 Lst Name."

  () feature_array

  "feature_type ('F10', ' Featgure Code 10', 10 '))),"

  subscriber_type argument)

  11,

  "Subscriber 11 name."

  "Subscriber 11 Lst Name."

  () feature_array

  "feature_type ('F11', ' Featgure Code 11', 11 '))),"

  order_type)

  2,

  () subscriber_array

  subscriber_type argument)

  20,

  "Subscriber 2 first name."

  "Subscriber 2 Lst Name."

  feature_array (feature_type ("F2", "Featgure Code 2', 20 ')));

  FOR m1 in 1... lv_order. COUNTY

  LOOP

  Dbms_output.put_line (.order_id lv_order (m1));

  -FOR the m2 in 1... lv_order (M1). COUNTING LOOP

  -NULL;

  -END LOOP;

  END LOOP;

  END multidimensional_prc;

  /

  I am able to read the data until the order data as it is in level 1. But when I'm reading the data of the subscriber level 2nd level or level of functionality level (3rd), I make mistakes. Basically, I am unable to read the data into Sub levels.

  Very much appreciate your help here.

  Thank you

  Please ignore this one.

  FOR m1 in 1... lv_order. COUNTY

  LOOP

  Dbms_output.put_line ('- order identification-' | .order_id lv_order (m1));

  FOR m2 in 1... .subscriber_data lv_order (m1). COUNTING LOOP

  Dbms_output.put_line (' Subscriber ID => ' | lv_order (m1) .subscriber_data (m2) .subscriber_id);

  FOR m3 to 1... lv_order (m1) of .subscriber_data .feature_data (m2). COUNTING LOOP

  Dbms_output.put_line (' Code function => ' | lv_order (m1) .subscriber_data (m2) .feature_data (m3) .feature_code);

  Dbms_output.put_line (' include the name => ' | lv_order (m1) .subscriber_data (m2) .feature_data (m3) .feature_name);

  END LOOP;

  END LOOP;

  END LOOP;

  I got the answer.

• ACS 5.2 places of NDG appearing is not in the access policies

  When I add placements under groups of network devices and try again and use them in my access policies that they appear. It just says no: "no data to display. If I try recreate them I get an error "" object that you are trying to create already exists. "." but it is empty. I can run an export and they appear in the CSV file, but they appear not anywhere on the GUI. I deleted the file and re-created with the same result.

  I have searched everywhere for those who have a similar situation but are empty. Any thougts?

  Kind regards

  Andy

  I have memories on the two issues with this:

  If ' there are multiple attributes with the same name as the NDG. For example if you create a user called "Locations" attribute, it can cause problems. Can be resolved by renaming the attribute

  -Can be questions if the word 'system' appears in the name of node NDG

  Not 100% sure for these (disclaimer) but I wanted to mention in the case where he gives some advice

• Pre-population of attribute in the access policies

  Hello

  I have set up users of the IOM to AD based on access policies.

  "In the access policy I have to define the ' name of the Organization" which the usere were created in AD.

  Is it possible to generate the ' generic name organization is based on the attributes of user?

  If so, how?

  Do not put a value in the access policy.  You must generate be it in a Preopopulate plugin on the side of the application, or in your adapter on the process shape to prepopulate.  Through the user key or any other value, make your logic and return the value of key-code of the search for your organization.

  -Kevin

• User ID no is not prepopulated in our instance form so that access policies

  Hello

  I have an interesting question. I integrate our custom with connector ICF application. I created all the metadata and two pre-populate adapters too. When I create an account manually (requires account) and I send you an empty form pre-populate those adapters work as I expected and filling the user ID and password.

  Also, I created a role and access policy. But when access policies are evaluated and the account must be created, pre-filled is the password and ID no.

  Please, you have an idea what is the problem? How can I solve this problem?

  Thank you

  Milan

  Check the automatic backup and the pop before auto is checked in the process definition

  http://docs.Oracle.com/CD/E21764_01/doc.1111/e14309/promgt.htm

  ~ J

• Issue OIm 11 g access policies

  Hi all
  
  We have defined the role of 'CommonUsers' and assigned access policies involving the announcement service and Exchange resources. We use the reconciliation of flat file to create users in the IOM, when ever his ends, there is a custom adapter assigns the role of 'CommonUsers', based on certain conditions.
  
  His works well for all new employees, IOM role 'CommonUsers' is the allocation to users and put in service in AD and Exchange.
  
  After the end of the user, the user would be in IOM with the "Disabled" status, AD/Exchange resources such as "Revoked" State (no advertising / Ex accounts) and with the release of the assigned role 'commonUsers '.
  
  Then, his does not work as expected for the status of the user of the IOM incident, REHIRE becomes 'Active' with the 'CommonUsers' role, but the AD and Exchnage resources are not getting put into service. Here, "commonUsers" is up to the user, but the connected/provisioing of role is not started.
  
  
  Please suggest me.
  
  Thank you.

  Grand,
  Please mark this thread as answered.
  :)
  Thank you
  Diallo

• The sub-groups and access policies

  It seems that when I add a user to a subgroup, the access policies of the parent that user Group does not occur. However, the user is added to the parent company of the Group of users
  Can someone please verify this?
  
  Thank you

  Subgroups does not inherit the access policy of SuperGroup in IOM [ID 815373.1]

  Bug 5985475 :

  Define an event handler after insertion and attach it to Manager data access policies as an object so that when a group is assigned to an access policy, it checks and add its subgroups to the access policy (just the first level as it will recursively the same it keeps adding subgroups). Verify that you have the same event handler attached to the event after removal of the access policy, so that to delete the access of a group policy, all subgroups are also dismissed by the access policy

  Good luck!

• Belong to several access policies

  Hello

  I am curious about all other experience with strategies of access maintained by groups and users belonging to several groups and several access policies. Example:

  John Doe belongs to group 1 and group 2

  Order
  1	AccessPolicyA
  	Selected groups: group1
  	Blocks access to the URL xyz.com
  2	AccessPolicyB
  	Selected group: group2
  	Allows access to the URL xyz.com

  The WSA will check all access DOE policies authenticates on? Or he stops and use the first access policy that it can access, in this example AccessPolicyA?

  Hi khadim,.

  WSA uses the concept of up and down to assess access policies so if political access strategy A B and B belongs to the same policy, identities and access, has listed above then WSA will use political access to assess the application.

  Best regards

  Alessandro

• Problem with access policies (create several resources)

  I'm having a problem with access policies:
  
  The first policy must create a resource.
  And the following policies should create childs on the resource.
  
  The problem here is that when the policies will add the childs, the resource is not configured yet.
  And then each will create a resource but I want just a single resource of the childs.
  
  
  When the resource is already deployed, policies to update this resource correctly.
  
  How can I fix?
  
  TKS

  Ricardo,

  I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
  The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
  The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

  I hope this helps.

  See you soon

• Event handlers and the question of access to IOM 11.1.1.5 policy

  Hello
  
  IOM 11.1.1.5
  
  We created the Post process event handlers to fill some fields on the user form.
  We created an access policy to configure the AD resource to the user.
  We had used the cards to prepopulate to fill in the form process AD.
  
  Now, as a user is created through reconciliation:
  (1) user is created at the IOM.
  (2) handlers process events post generates fields (name common example seen on balls)
  (3) access policy triggers and using prepopulate adapters process form is filled
  (4) fields like first name, last name are entered on the form of courses
  (5) the fields that are generated by using common name event handlers are filled under vacuum in the form of courses.
  
  Reason is that, before the common name is saved on the user (generated by the event handler) form access policy is drawn and prepopulate the recalled adapters and resources is put into service.
  
  How can I ensure that fires after access policy fields are recorded on the form user generated by post process event handlers.

  Yes, you need a different order for diff eventhandler. But preprocessing and postprocessing can have the same

  for example pre eventhandler-1003, 1005
  post eventhandler may also have some 1003,1005

  but you can't put even in order in the same type of eventhandler

  If the command does not try my approach 2 from the previous post

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• WRT610N question to access the data on the NAS

  Hello

  Just replaced my WRT54G (works perfectly) with a WRT610N and used the same configuration to access Internet and LAN.

  Upgrade to the latest Firmware for the 610N.

  The WRT610N that is connected to a SD2008 (1 GB of Linksys 8 - port Switch).

  SD2008 connected to a Synology DS209 + with the latest Firmware and PC XP. Access between PC and DS209 + works perfectly.

  WRT610N connected to a couple of wireless devices; such as iPhone, Vista and XP PC and wired for PS3.

  When you access any device (PC, PS3) through WRT610N, I see all the directories and content even as thumbs on DS209 +. Try to open or to copy one takes file (2 MB in size) incredibly long (about 3 minutes). .

  Copies of Vista or XP PC wireless to DS209 + large works and same file is copied in a few seconds. Internet download works fine with good performance as well.
  WRT610N with NAT enabled; Firewall disabled.

  Any suggestions or solutions?
  Thank you

  This is it.

  Bought new cables - same question, MTU has changed - same question. Changing the port on WRT - BINGO.

  Looks like Port 1 is defective,

  Thanks for your help amine.

  Concerning

• Question list access

  Hello

  I have a question on the application of an external interface access list (I know it sounds a bit silly, but since I use on a deadline, I thought that it was preferable to order my question on this forum). This is for a router on which users can dial-in.

  I have defined an access list that is extended with a permit number.

  In the documentation that I found on the net, I noticed that there seem to be two ways to apply the access list to the interface.

  One way seems to be using the Dialer group command on the interface (and later Dialer list to link the access list for the Dialer group).

  A second way (I think :-), the normal way is to use the ip to the interface group-access command.

  My problem is that I do not understand the difference in implementation. What is the difference? Is there a documentation available on the matter (of course I could just be implemented with the command "ip access-group name in", but I would like to know why this is the right way to do it (or not)).

  Any help would be appreciated.

  Kind regards

  Ronny

  Hello

  The dialer list's composition by the Protocol or by a combination of a control protocol. It is used to grant or deny the composition of certain criteria.

  You probably ip group-access control to allow or deny traffic with certain criteria.

  Hope that helps

  Roger

• Question of access list for Cisco 1710 performing the 3DES VPN tunnel

  I have a question about the use of access lists in the configuration of a router Cisco 1710 that uses access lists to control traffic through the VPN tunnel.

  For example the following lines in a configuration on the remote router. My question is whether or not the traffic that matches the definition of list access-130 (something other than 192.168.100.0/24), cross the VPN tunnel or go directly to the Ethernet0 interface.

  My understanding is that traffic that matches the access list 120 would be encrypted and sent through the IPSec tunnel. If there was "ban" set out in the statements of 120 access-list, the traffic for those would be sent through the IPSec tunnel but not encrypted (if possible). And finally, given that the definition of crypto card reference only "adapt to 120", any traffic that matches 130 access list would be sent Ethernet0 but not associated with the card encryption and thus not sent through the IPSec tunnel. "

  Any input or assistance would be greatly appreciated.

  Map Test 11 ipsec-isakmp crypto

  ..

  match address 120

  Interface Ethernet0

  ..

  card crypto Test

  IP nat inside source overload map route sheep interface Ethernet0

  access-list 120 allow ip 192.168.100.0 0.0.0.255 10.10.0.0 0.0.255.255

  access-list 130 refuse ip 192.168.100.0 0.0.0.255 10.10.0.0 0.0.255.255

  access-list 130 allow ip 192.168.100.0 0.0.0.255 any

  sheep allowed 10 route map

  corresponds to the IP 130

  He would go through the interface e0 to the Internet in clear text without going above the tunnel

  Jean Marc

• simple question about access to information of predicate and filter

  Hello Experts

  I know that maybe this is a very simple and fundamental question. I read a lot of articles on explains the plan and trying to understand what are 'access' and 'filter' which means?
  Please correct me if I'm wrong, I guess when the index of explain plan can use predicate choose access if the explain command plan go with complete table filter scan (witout index) is chosen.

  My last question is, can you recommend me an article or document will contact plan to explain it in clear language and base level?

  Thanks in advance.

  Hello

  as the name suggests, access predicate is when data access based on a certain condition. Filter predicate is when the data is filtered by this condition after reading.

  For example, if you have a select * FROM T1 WHERE X =: x AND Y =: y, where X column is indexed, but column Y is not, you can get a map with an INDEX RANGE SCAN with access predicate = X: x (because you can use this condition to when selecting the data to be read and read only sheets of index blocks that meet this condition) and ACCESS BY ROWID from TABLE with the filter predicate Y =: y (because you cannot check this condition until after reading the table block).

  I'm not aware of any good articles on the subject, and unlike others I can't find Oracle enough detailed documentation. I suggest you read a book, for example Christian Antognini, "Troubleshooting Oracle performance problems."

  Best regards

  Nikolai