Iomega 1 TB not disc not detectedon e4200

Firmware is 1.0.05 (does not work on 1.0.04)is too). It has a single partition formatted in ntfs, suspicion why this does not work or I could make diagnosis?

Is - this storage device detected when connected to a computer? Do you use the interface only or do you also have the software update Cisco Connect installed on your computer? Try to reset the router and reformat the hard disk. You can view the list as well to test usb devices of storage for this router click here.

Tags: Linksys Routers

Similar Questions

  • system does not recognize the CD drive

    I must be crazy. Suddenly, my Windows XP Tablet in the non recognition of my CD drive which is connected with a USB cable. There are in position and work, drive Local (c) new Volume (e) which is equipped with a USB plug in hard drive for backups. But where is the d: drive? Why it does not appear?

    But if I unplug the CD device and plug in again, I hear a sound of Windows BONK, so I know that it is connected.

    Also, if I open my Iomega HotBurn Pro, he tells me that of Iomega HotBurn does not detect a CD-R/RW/DVD-R/RW in your system. Please make sure that all cables are properly connected.

    If I am a music CD to play, nothing happens at all.

    Oops... fixed. I noticed that a box would pop up and disappear very quickly once I put in a CD. So I made a Print Screen for I can print it in a doc and see what he says. He gave me 4 choices

    1 extract music from CD with Windows Media Player

    2. play audio CD using Windows Media Player

    3 open the folder to view files using Windows Explorer

    4. take no action

    I checked always do the selected action and then I clicked on 2. Now it opens Windows Media Player and plays music!

  • Specifications of IOmega Home Media 1 TB NAS storage

    I have an IOMega Home Media drive that I bought a few years ago now (http://www.iomega.com/about/prreleases/2009/010509_home_media.html) and decided to start using it primarily as a server for my high-resolution audio. It is to be newly acquired Setup for my network Naim UnitiQute streamer. However, I have discovered since the performance of the NAS IOmega is pitifully bad and is actually unusable for its intended purpose. For example, it took well over 24 hours to remove 100 GB of old media (my low resolution itunes library and other things). So I can actually stream high resolution to my Naim network drive, I need to buy another drive superior performance NAS, but for this I need to know the material detailed specifications of the car so I can compare these measurements with other new potential players. for example the Nas Lacie 2Big. What I'm looking for above all, is the amount of RAM and the processor clock frequency. These are usually specified in new NAS drives, but IOmega because do not exist in their own right over and Lenovo did a pretty bad job on acknowleding the existence of older IOmega products, its very difficult for me to find this information. I need this information to help me not to buy a new NAS drive that is simply not up to par, so thanks in advance. There may be a link to the specifications of the product on Lenovo somewhere.

    Hi yebbi,

    You can find the specifications of this device here: ftp://ftp.iomega.com/com/launchkit/mediahomenetwork/pri_34336_home_media_nhd_500gb.pdf

  • Issue by unplugging the place instantly back.

    Original Titlle:

    Iomega external hard drive

    Help!

    I recently tried the computer to backup on an external hard drive, Iomega 2 TB.

    While saving, I unplugged the cable from the computer, I found out after the fact, is a big no, no.

    It ceased broadcasting.

    I tried to restart the backup, but I can't. It cannot be found and will not appear on my computer screen. There is simply no.

    Is there another way to access this external hard drive or I've lost everything? I have also used the disc several times, so it doesn't work.

    Thank you.

    Hi Barkkey,

    You should not disconnect your hard drive while doing a backup because it will not get all the files on your hard drive and may contain memory loss.

    Try this, I want to know if the computer is detected the hard drive in the following locations.

    • Press the Windows key + R, in the Run dialog box type "diskmgmt.msc".
      It appears here?
    • In the Run dialog box is type "devmgmt.msc" there?

    Reference:

    What should I do if my Iomega® HDD is not detected?

    Please return with the required information so that we can help you further.

  • Replace HARD drive in ix4 - 200 d with 4 No 3 TB drives

    I just traded all four 2 TB HDD in my iomega with 3 TB Seagate NAS drives. It was RAID 5 and I swapped each three days. All reconstructions of data protection took place without a hitch.

    I was expecting when I replaced the fourth drive capacity would increase from 5.4 to about 8.1 but he didn't not. It shows all the hard drives 3 drives to and total size TB 10.9 but just under that number on the same page, total capacity is still only 5.4 and NAS still 90% full.

    I tried to restart, but no change.

    All my data is backed up on my Synologies, but after taking the time to rebuild the data on the iomega RAID and not to lose, I would rather unload everything if I can avoid it.

    Pls advise. What should I do next?

    Hi Niko-Lenovo,

    What version of the firmware on your ix4 - 200 d? You may need to do a factory reset of the web interface, which is destructive of data. When replacing all readers to improve the storage capacity, usually data are saved and removed from the unit, then transferred to the unit after the upgrade. Please see: upgrade storage capacity for an ix-series network storage device

  • Files corrupt on Satellite 2450

    Hello world
    about a year on a toshiba laptop - info below - my wife has complained that its files in Word 2003 have been mysteriously transformed into unreadable garble.
    Text became symbols... or, a translation box appears, but there is no way to return this mutilated in its original file. Most of his recorded pictures have also disappeared. (The files remained, but each page was empty when opening). So I wanted to put this on this forum and see exactly what the Devil's going on.
    I had my own problems with the laptop. I transferred more than 2100 JPEGs of my drive hard iomega and created a disc using nero. Everything was fine until I saw the disc on another dvd player - info files were black, some pictures would be partially visible, and the disk drive had trouble reading the cd. When I plugged in my Iomega hard drive in our old workhorse 98se and used an older version of nero, I got the cd and it played perfectly in 2 separate dvd players.
    Operating system system model
    Windows XP Home Edition Service Pack 2 (build 2600) TOSHIBA Satellite 2450 PS245C-04P40P
    System serial number:
    Case type: NotebookProcessor a Circuit Board printed main b2.80 gigahertz Intel Pentium 4
    8 kilobyte primary memory cache
    cache of 512 KB secondary memory board: TOSHIBA Portable PC Version A0
    Serial number:
    The bus clock: 133 megahertz
    TOSHIBA BIOS: Version 1.10, Modules of memory 01/20/2003Drives c, d60.01 gigabytes usable hard drive capacity
    36,60 gigabytes of free disk space

    TOSHIBA DVD - ROM SD-R6012 [CD-ROM drive]

    EPSON Stylus device [hard drive] storage USB - drive 1
    HITACHI_DK23EA-60 [hard drive] (60,01 GB) - drive 0, s/n 578100, rev 00K2A0A1, SMART location: healthy 512 MB installed memory

    Slot machine ' DIMM 0' has 256 MB
    Slot machine "DIMM 1' has 256 MB of Disk Volumes Local c: (NTFS on drive 0) 60.01 GB36.60 GB free

    Hello

    seems that the hard drive or RAM is defective. I don't know, but if I were you I exchanged these components as your problem doesn't sound like a software problem...
    First try to replace the memory modules because they sometimes are the main reason for this error. I would test the modules with "SuperPi" before replacing the RAM. The same should be done with the hard disk, depending on the manufacturer of the HARD drive, I would check the Web site of the manufacturers for some specific tools of the reader to check if the drive works properly.

  • Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

    My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

    Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

    If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

    The drive may have failed.

    Try different USB cables.

    Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

    Ciao.

  • E4200 with Win 7 - could not connect to the sharing of files on the USB storage device

    Hi, I tried several disks now, but am mainly interested in getting my Iomega 1 TB drive to work, but none of the 3 I tried to do. None of the USB drives I had when buying this router on the list of "approved" ridiculously short which is of course not noticed when buying the router, but the discs are recognized, I can FTP to one of them (Filezilla), format, create to-DOS, etc. via the web interface... the only thing that does not seem to work is to map the created actions. The error obtained net use is 'System error 1231' giving in 'Map network drive', 'Windows cannot access\\192.168.1.1' with 0x800704cf error code. I get what I pass credentials or not. Please advise, external storage has been the main reason that I bought this router and I need to know if I should return it. Thank you

    I know that sounds totally absurd given that FTP and what - not worked, but I swapped the USB cable I was using between readers and the router, and presto, it worked. I been in this business a lot of time and work with Cisco equipment all the time, so I know how ridiculous, this sounds like a solution, and perhaps in the context of permutation that cable thing happened I can't remember since I was a package 6 deep at the time... but it works now... now, if I can get just the AVI 1080 p files to stream to Xbox 360 without the video do rough I will be gold... but that's another thread. Thank you all.

  • My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive.

    My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive. So where did it come from? I 'get info' on this subject, but it doesn't tell me a thing.  He sees the disk drives elsewhere in my house? It's to see my iPhone as a remote disc? The photo with him is a DVD or CD gold. It drives me crazy.  I am running OSX Sierra.

    This has been on the Mac for a while now... Here is a link that can better describe it.

    Use the CD or DVD drive from another computer with your Mac - Apple Support

  • DVD Studio Pro DVD "supported disc not available".

    Hello Forum,

    I am trying to burn a DVD again an already existing DVD Studio, already registered and created the file pro with all the menus related to the video file.  Another company created the DVD Studio pro menu and queue in front of me, I replace the newly edited video and try to burn a DVD with the new video and audio files.

    I compressed the file Compressor 3.5 using the button create DVD in the compressor, I created a file DVD SD Mpeg2, audio and video.  Imported in the pro Studio already created DVD file, I have the burned DVD, but appears to "Support disc not available" when I try to play the DVD on my Imac drive (also not tried in a standard DVD player no chance)... I tried this twice now, the first time that I realized I had created a HD DVD, I also created a separate folder on the external drive as well.  When I click on the DVD that was burned it shows as: HVDVD_TS and no audio file.

    Can you please help me, I watched the video of youtube after another, but I'm not create from scratch, I know not at all unfortunately the program, but I use a DVD already created Studio, file with many menus already linked to the video and don't want to not recreate from scratch... I think this should not be so difficult, and definitely miss me something.

    Thank you very much for your help!

    -Tony

    Open the preferences of DVD Studio Pro and set it up to create the SD DVD.

    -DH

  • When I use my super disc to DVD recording, he plays on my IMac, but not on my dvd player.  I'm something wrong or just not do something?

    When I use my super disc to DVD recording, he plays on my IMac, but not on my dvd player.  I'm something wrong or just not do something?

    what you save? How do you save it? What format? what application? what you're trying to read on?

  • GarageBand Jampack World Music Disc 1 do not install

    Hello, I bought all the Jampacks Garageband and all worked with the previous Garageband but when I tried to install it again on another computer, all of them installed except World Music Disc 1. He settled at first but in the end, it stops and it is said that there was an error during installation. I tried to update my OSX El Capitan of 10.11.5 to 10.11.6,, but the same problem occurs. Here are the data of the console:

    25/07/16 17:20:17, 000 syslogd [43]: sender ASL statistics

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: < < < < MediaValidator > > > > mv_ValidateRFC4281CodecId: codec unrecognized 1. (null). Specific codec check failed.

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: < < < < MediaValidator > > > > mv_LookupCodecSupport: codec unrecognized 1

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: [17:20:32.824] mv_LowLevelCheckIfVideoPlayableUsingDecoder reported err =-12956 (kFigMediaValidatorError_VideoCodecNotSupported) (codec video 1) line of 1921

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: < < < < MediaValidator > > > > mv_TestCodecSupportUsingDecoders: codec unrecognized 1

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: < < < < MediaValidator > > > > mv_ValidateRFC4281CodecId: codec unrecognized 1. (null). Specific codec check failed.

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: < < < < MediaValidator > > > > mv_LookupCodecSupport: codec unrecognized 1

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: [17:20:32.824] mv_LowLevelCheckIfVideoPlayableUsingDecoder reported err =-12956 (kFigMediaValidatorError_VideoCodecNotSupported) (codec video 1) line of 1921

    25/07/16 17:20:32, com.apple.WebKit.WebContent [741 824]: < < < < MediaValidator > > > > mv_TestCodecSupportUsingDecoders: codec unrecognized 1

    25/07/16 17:23:37, 000 kernel [0]: SAM multimedia: READ or write failed, SENSE_KEY = 0 x 03, ASC = 0 x 11, ASCQ = 0 x 00

    25/07/16 17:23:49, 000 kernel [0]: SAM multimedia: READ or write failed, SENSE_KEY = 0 x 03, ASC = 0 x 11, ASCQ = 0 x 00

    25/07/16 17:24:10, 000 kernel [0]: SAM multimedia: READ or write failed, SENSE_KEY = 0 x 03, ASC = 0 x 11, ASCQ = 0 x 00

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 099]: < < < < MediaValidator > > > > mv_ValidateRFC4281CodecId: codec unrecognized 1. (null). Specific codec check failed.

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 099]: < < < < MediaValidator > > > > mv_LookupCodecSupport: codec unrecognized 1

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 099]: [17:24:37.099] mv_LowLevelCheckIfVideoPlayableUsingDecoder reported err =-12956 (kFigMediaValidatorError_VideoCodecNotSupported) (codec video 1) line of 1921

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 099]: < < < < MediaValidator > > > > mv_TestCodecSupportUsingDecoders: codec unrecognized 1

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 100]: < < < < MediaValidator > > > > mv_ValidateRFC4281CodecId: codec unrecognized 1. (null). Specific codec check failed.

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 100]: < < < < MediaValidator > > > > mv_LookupCodecSupport: codec unrecognized 1

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 100]: [17:24:37.100] mv_LowLevelCheckIfVideoPlayableUsingDecoder reported err =-12956 (kFigMediaValidatorError_VideoCodecNotSupported) (codec video 1) line of 1921

    25/07/16 17:24:37, com.apple.WebKit.WebContent [741 100]: < < < < MediaValidator > > > > mv_TestCodecSupportUsingDecoders: codec unrecognized 1

    25/07/16 17:24:48, 000 kernel [0]: SAM multimedia: READ or write failed, SENSE_KEY = 0 x 03, ASC = 0 x 11, ASCQ = 0 x 00

    25/07/16 17:24:55, 000 kernel [0]: SAM multimedia: READ or write failed, SENSE_KEY = 0 x 03, ASC = 0 x 11, ASCQ = 0 x 00

    25/07/16 17:25, 000 kernel [0]: SAM multimedia: READ or write failed, SENSE_KEY = 0 x 03, ASC = 0 x 11, ASCQ = 0 x 00

    25/07/16 17:25, 000 kernel [0]: disk1s2: i/o error.

    25/07/16 17:25, Installer 910 [764]: Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software.

    25/07/16 17:26:30, 494 ntpd [190]: time together + 0.330284 s

    25/07/16 17:27, com.apple.xpc.launchd [1 590]: (com.apple.WebKit.WebContent.927E35E8-F678-4965-B60C-D45F733DD557 [773]) Service came out with abnormal code: 1

    25/07/16 17:27:01, 022 WindowServer [158]: _CGXRemoveWindowFromWindowMovementGroup: window 0 x 60 is not attached to the window 0 x 76

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 360]: < < < < MediaValidator > > > > mv_ValidateRFC4281CodecId: codec unrecognized 1. (null). Specific codec check failed.

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 361]: < < < < MediaValidator > > > > mv_LookupCodecSupport: codec unrecognized 1

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 364]: [17:27:02.363] mv_LowLevelCheckIfVideoPlayableUsingDecoder reported err =-12956 (kFigMediaValidatorError_VideoCodecNotSupported) (codec video 1) line of 1921

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 471]: < < < < MediaValidator > > > > mv_TestCodecSupportUsingDecoders: codec unrecognized 1

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 471]: < < < < MediaValidator > > > > mv_ValidateRFC4281CodecId: codec unrecognized 1. (null). Specific codec check failed.

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 471]: < < < < MediaValidator > > > > mv_LookupCodecSupport: codec unrecognized 1

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 471]: [17:27:02.471] mv_LowLevelCheckIfVideoPlayableUsingDecoder reported err =-12956 (kFigMediaValidatorError_VideoCodecNotSupported) (codec video 1) line of 1921

    25/07/16 17:27:02, com.apple.WebKit.WebContent [774 471]: < < < < MediaValidator > > > > mv_TestCodecSupportUsingDecoders: codec unrecognized 1

    25/07/16 17:27:05, 608 WindowServer [158]: _CGXRemoveWindowFromWindowMovementGroup: window 0 x 60 is not attached to the window 0 x 76

    Help please because I need that Jampack...

    The JamPack are so old and have not been updated in a long time.  The installation of the 'World Music' program called PowerPC code that cannot run on an Intel Mac.

    The best way to manage the metaoutil is to avoid reinstalling and migrate from Mac to Mac.

    You can try the workaround posted here: Re: trying to install the old Jam Packs on MacBook Air/Lion.

    Or copy the missing files from your old Mac.

    Look in these libraries:

    / Library/Application Support/GarageBand/Instrument library.

    and

    / Library/Audio/Apple Loops/Apple/Jam Pack world music.

  • disc will not load or not going to classes

    disc will not load or going to class in a mini

    What do you mean by "does not load?

    Y at - it a disc stuck in the player? We must look carefully into the slot.

    What model Mac?

    The optical drive in my 2009 Mini failed about three years ago.

    See also:

    Get help with the SuperDrive slot on your Mac - Apple Support loading

  • Commercial DVDs do not play on MacBook Pro.  "Not allowed" and "Supported disc not available" is displayed.  DVD plays normally when inserted in a different drive.

    MacBook Pro (15 inch, early 2011) / 2 GHz Intel Core i7 / 8 GB 1333 MHz DDR3 / OS X El Capitan Version 10.11.6

    DVD Player Version 5500.66 / Build 5,560 (2)

    When commercial DVD (NTSC) inserted in the MacBook Pro DVD Player error messages "forbidden" and "Supported disc not available" are displayed when I tried to play the DVD.  When the DVD was removed from the MacBook Pro and inserted into a different DVD player, it works normally, then the DVD was apparently not the problem.

    Your help is appreciated...

    Delete ' ~ / Library/Preferences/com.apple.DVDPlayer.plist ' and a DVD player or reopen could solve the problem.

  • Cannot turn on FileVault 2: "some disc formats do not support the recovery partition" version of the OS - 10.11.4

    Hello

    I went to turn on FileVault encryption for the first time, and when I click on restart (by FileVault guests) I got a error message that says "FileVault can not be enabled for the drive. Some disc formats do not support the required encryption recovery partition. To use encryption, reinstall this version of Mac OS x on a reformatted drive. »

    I found an article from apple support for this problem with El Capitan who recommended first aid running in disk utility.  I tried this but then received the same error message.

    a little history:

    -Mac OS 10.11.4 installed running on the brand/model ADATA SP 550 SSD

    -This SSD is a 250 GB drive partitioned into two, with one of these partitions being my OS

    -J' ran this BONE of a Bay external thunderbolt

    -ssd is formatted as HFS journaling +.

    I am really confused about this error message and couldn't find much online about it.  I use a fairly recent OS install.  I installed the operating system clean and made all my preferences and install so that I can encrypt and then back up this pristine OS environment in time machine so that I could always go back to it on the line in case where things are bunk too upward.  I'd have to install yet another OS to clean and do all my long software installs and system preferences settings... SIP.  I don't know if that makes a difference, but this version of the OS that I have been cloned by superduper to this SSD partition.

    What is the brand of SSD that I?  Might that matter?  I appreciate all the comments.  I'm really scratching my head...

    Thank you very much

    To enable FileVault, you need a recovery partition, which you don't have. You can create one by reinstalling OS X.

    If you do not already have a current backup, please backup all data, and then reinstall the OS. * you don't need to erase the boot volume, and you won't need the backup unless something is wrong. If the system has been upgraded an earlier version of Mac OS X, you may need to the Apple ID and password to use.

    There are ways to back up a computer that is not fully functional. Ask if you need advice.

    If you installed the runtime Java distributed by Apple, and still need, you will need to reinstall it. It goes the same for Xcode. All other data will be preserved.

    Related support article refers to OS X 10.11 ("El Capitan"), but the procedure is the same for OS X 10.7 ("Lion") and later versions.

Maybe you are looking for

  • Cannot install updates to Windows on the Satellite L505-13N

    Hi all I have a L505-13N and I recently changed the HARD drive. Even if I had a copy of the installation for win7 64 bit disc, there is a message at the beginning of the "set up services" that the installation could not proceed with this material...I

  • Satellite A300 - stopped to ask fingerprint logon

    Hello I have a Toshiba A300 with Windows Vista on what I bought late last year.Everything worked very well and in order until 2 months ago, when he stopped suddenly to ask fingerprint logon. I don't really know what caused it to stop working. Could s

  • Satellite P200 - cannot install XP due to lack of HARD drive

    Hello... I have the Toshiba Satellite P200, with Windows Vista home edition.I want to remove and install win XP but I have the problem;I can t install windows xp. I have this message: Setup doesn't detect any hard disk... A friend tell me what s due

  • reset password yahoo

    I just have my MacBook Pro has fished at a 10.6 to 10.8.5 by the geniuses at the Apple store. Everything is good except my password Yahoo mail isn't being except. I don't know how to change my password. I went to my account and tried to change out th

  • viPrintf get parameter

    I have to write a GPIB (viprintf) command, and the get of the user parameter. the bleow using viPrintf is fair? If (InstrumentName_status = viPrintf (instrSession, "TPCSTEMP", stepsize, "\n"Return InstrumentName_status; It 'TPCSTEMP' is a GPIB comman