IOMEGA 1 TB USB 2.0 EGO

I have lost the power of this backup drive, IOMEGA 1 TB USB 2.0 eGO.

I have a SEAGATE PSU rated at 2 amps but the IOMEGA is rated at 1.5 amps.

Can the power of the amp SEAGATE 2.0 be used?

If not, where can I get a replacement power supply for 1.5 amp for the IOMEGA?

Hi OLDMAN1938,

I would not recommend using a power supply which does not meet the specifications of the device from Iomega. Unfortunately, we do not have power supplies for sale. I recommend finding an electronics store that has a power supply according to the specifications of the eGo, or you can look online for a replacement power.

Tags: Lenovo Products

Similar Questions

  • Iomega usb 2.0 EGO unrecognized

    When I plug my new 320 E concert - GB external hard drive on Dell M4500 laptop under Windows 7 Pro 32-bit device is not recognized.

    : "USB device not recognized".

    System Tools, material resources and foung no conflicts.

    When we look at system tools, system information, reports on hardware issues:

    Device unknown USB\VID_0000 & PID_0000\6 & 3189BB0F & 0 & 43 3
    This external hard drive work on my Windows XP laptop.

    If you have any suggestions on how to solve this answer please, thanks Chuck

    Take a look on:

    https://iomega-eu-en.custhelp.com/app/answers/detail/a_id/1235 .

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  • Windows 8 and USB external hard drives

    I want a new dv7 with Windows 8 and an Iomega Prestige 1 TB external hard drive I use successfully on Windows XP, Windows Vista and Windows 7 systems. It behaves erratically in Windows 8. Sometimes it is not recognized at all. Sometimes it is, but trying to access it via Explorer, Windows crashes requiring a diet forced down. Other times, you can access it with success and even copy a file to it with Solution Explorer, but if you try to copy multiple files with the same drag and drop, it displays the calculation time to copy file window, but the calculation done so forever, just stays there. Also, when you try an Xcopy in the prompt with mutiple files and / or files, copy the first file he is suspended from the command window. The system has a newly updated BIOS and all installed Windows updates. Ideas?

    Tried moving the Iomega for a USB 3.0 drive (the drive is 3.0 and 2.0 compatible) 2.0 in Windows 8 port and it now works fine. No idea whether the problem with USB 3.0 with Windows 8, HP or Iomega.

  • USB 3.0 drives

    I was support of up to 3 external drives USB 2.0 different on XP now for 10 years.  I have 2 computers still under XP Pro, the rest are running Win7.

    My question is this, I recently bought a USB drive external Iomega that supports USB 3.0, but says it is also backward compatible with the 2.0.

    Well, I can write and read files to and from the drive without problem.

    But when I tried to use the same backup applications that I used for 7 years now (engineering 8.0) and EaseUS backup fails with a fatal error and is abandoned.

    I wonder if the USB drivers on my computer in trouble with the Reader 3.0 OR encryption of crazy virtual CD that most drive manufacturers throw on our days by default.

    Someone at - it experience with these issues?

    Yes, USB 3.0 for Win7 drivers come from the host controller provider, not Microsoft.

    These drivers may not be compatible with specific software, or have other questions. Unfortunately, this is the situation with USB 3 before Win8.  For assistance, contact Easeus.

    -pa

  • My computer freezes Iomega Hotburn Pro

    Inspiron 530

    Windows XP

    Drive Iomega CD - RW USB 2.0 External Drive

    This is a new computer purchased in January 2008.  The CD - RW was purchased in February 2008.

    The computer has been reformatted manually yesterday Dell due to many problems.

    After that each material has been reinstalled, I checked "My Computer" and right click on an icon to ensure that I did not receive a Dr. Watson error debugging.

    After installing Hotburn Pro who came upon the solution with the engraver, Dr. Watson bug error disc came.  Reference called Dell.  The computer has been restored to the set point from yesterday.  Everything worked well.  Reinstalled Hotburn Pro again.  Same message came.  Uninstalled the software and the computer works fine.  No message when I right-click.

    Someone at - it any insite on this problem?

    Thank you Siam


  • M30 DVD-UDF & DVD + R writing

    Hi people,
    I wonder if anyone has figured this out already...

    So I try to use the format UDF DVD + RW on my M30, using Nero InCD. Initially, InCD would not install and tell me that there is a conflict with the DVD-RAM drivers.
    After installing these drivers (after all, price and availability of the media doesn't it look likely that this format has much of a future, and using updated UDF shaped allows to achieve the same results at a lower cost and liked compatibiliy), InCd works very well on my burner DVD EXTERNAL (Iomega Super DVD USB), DVD + RW and CDRW similar. However, the engraver of DVD INTERNAL of the M30 would only form CDRW in UDF format. When formatting DVD + RW to UDF, the program may report an error, at the same time of the formatting process. When loading a DVD + RW that has been formatted UDF disk EXTERNAL, internal drive of the M30 would be recognized properly, read the files it contains, but be unable to write to disk (showing free space 0) and load files in read-only mode. The problem is obviously not with the media itself, given that the drive would erase them without problem and write them in normal CDFS format as well. It seems somehow the firmware of this player prevents handling format UDF DVDRWs. Went to mast * a.com, but it is not help. Anyone any idea?

    -also, did anyone have any success since still write DVD + r on this "Multidrive"? I tried several cheap and more expensive, that works on my external hard drive, but none on internally - he will write for them (at the speed of 2.4 x while the external drive wrote for them at 4 x), and then invariably at the end of process, give a message such as "error - could not perform disc at a time." (However, the internal drive reads DVD + R, written on my external hard drive without problem). Among others, I tried Dysan DVD + R and DVD - R not the cheapest Dysan things - and the DVD - R would work fine, while the DVD + R would not. Funny thing is this work of DVD + RW on this drive very well.
    So are there any success since still writing DVD + r on this drive? And if yes, what brand?

    see you soon
    hwbeirut

    I wrote TDK DVD + R 4 x successfully and reading them later in different DVD readers.

  • I can't access my encrypted data files backup media on portable hard drive

    I'm completely frustrated because I backed up my elements multimedia such as photos, videos, and documents on my iomega 80 GB usb portable hardrive and now when I try to open the photos there are "no previews" available, my videos "no access rights", in media player and documents "access denied." Yet these same files on my C: WINDOWS XP, they are accessible.

    I have the Iomega HDD 80 GB divided into 2 were leaving and notice that it opens files in this partion but the other does not open media in its partition. Properties for the records that I have problems with checked in the Advanced tab "Encript the contents to secure data". I disabled this restart, restarted all to nothing does not. I need advice because I have the feeling that the ntfs files have rights of access and I have to show somehow that I'm the user for these files. NOTE: I tried all the security and sharing of troubleshooting guides without result; Anyone having problems simular Advisor please a solution to this delema. Thanks - Michael

    Hi msielectric,

    1. What is the full error message you get?

    I suggest you to take ownership of the partition on the laptop hard drive and check if it helps:

    a. Click Start, click all programs, and click Accessories.

    b. right click on command prompt, and then click Run as administrator.

    c. in the administrator of the command prompt window, type the following command and press on enter:

    takeown /F (file path)

    For example:
    takeown /F C:\Users\\Music

    d. now, type the following command and press ENTER:

    CACLS (file path) /G Administrator: F

    Note: Instead of the administrator, you can type your name of user account with administrator privileges.

    For example:
    CACLS C:\Users\\Music/g Microsoft: F (where Microsoft is the account of a user with administrator privileges).

    e. restart the computer and test the issue.

    Referral link: http://technet.microsoft.com/en-us/library/bb490872.aspx

  • 0 x 80070057 error when copying files

    Simple copy / paste internal drive on USB key intermittently generates error 0 x 80070057. Usually does not occur unless the copy or issues (on the beach of 1 GB), files copied at the time of the error is not relevant. Very frustrating. This happens since I bought a key USB Verbatim 1 TB. Took training and exchanged against an Iomega 1 TB USB drive. The same problem only $56.00 poorer. Both drives are USB 3.0 compatible. I formatted entirely two drives after encountering the problem, but it has not changed. ChkDsk indicates that everything is OK. Problem occurs when I use my USB 3.0 port and when I use the USB 2.0 port on my laptop. Still have my old book size USB drive and I have no problem with him at all. Am on Windows 7 Ultimate N.

    Any help would be appreciated!

    Run SFC

    http://support.Microsoft.com/kb/929833

    Click on these links

    http://www.TomsHardware.com/Forum/265158-32-0x80070057-error-copying-files-hard-drive-hard-drive

    http://www.SevenForums.com/hardware-devices/108453-error-0x80070057-moving-files-external-hard-drive-help.html

    Bravo!

  • Rescue and recovery lists no backup on USB Iomega eGO drive

    Hello

    I have been using an Iomega eGO external backups USB drive.

    I was able to identify and remove (if necessary) backups in Windows 7 and rescue & recovery running, but I can't get the list of backups at the start of a recovery in rescue & recovery DVD.

    Basically I replaces unencrypted with a SSD hard drive that supports encryption.

    The goal was to use a full backup immediately before removing the HARD drive to restore the complete system.

    At the start of the recovery DVDs, recovery utility & rescue lists not all backups, even when the check box for the list of backups on other systems is checked.

    It makes no difference if the selection of THE places or USB external drive.

    Any ideas?

    Backups are not much good if you can't get back them.

    If my old drive did not then I would be in a worse state than this. I can't say I'm impressed.

    Well, I've finally sorted this issue.

    I tried to create a new recovery disk.

    I even tried the recovery time in Windows and see what backups it detected. Yet once, I drew a blank.

    The question was this:

    On my W510 at least, none of the USB3.0 ports are recognized by Lenovo rescue and recovery software when you select the USB storage device. Once connected to a single USB 2.0 port the USB eGo has been recognized and listed backups.

    Unfortunately, this means a minimum of 6 hours to restore from a full backup!

  • Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

    My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

    Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

    If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

    The drive may have failed.

    Try different USB cables.

    Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

    Ciao.

  • Windows 7 - hard drive from Iomega EGO 2.0 Ext. - recognized but does not work

    Just got a new laptop Gateway with Windows 7, and I'm having a hard time getting my external drive running.  It is an Iomega Ego 1 TB USB 2.0 drive, which is on the list of compatible hardware.  I don't see the drive under 'Computer', however, if I go to "Computer management" and then under "Disk management" I can see the player identified as disk 1.  If I try to do a right click on the drive to set the drive letter and path I get an error saying "the operation failed to complete because the disk management console view is not updated.  Refresh the view by using the refresh task.  "If the problem persists close the disk management console, then restart disk management or restart the computer.  I have done this several times and changed the USB port and cable tension... all out and started... all without any positive result.

    Anyone have any ideas?

    Thanks in advance!

    Hi czarkzm,

    Please don't forget to update your system with the latest Windows 7 drivers for your device:

    https://Iomega-na-en.custhelp.com/cgi-bin/iomega_na_en.cfg/php/enduser/CCI/product.php?p_sid=cUsmvY1k

    Hope this helps

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows 7 - Iomega EGO 2.0 disk hard ext.

    Windows 7 - hard drive from Iomega EGO 2.0 Ext. - recognized but will not display the files on it

    Hi Joseph,.

    Thanks for posting your query in Microsoft Community.

    I understand from the information you have provided to us, you are facing problems with an external hard drive in Windows 7.

    I will certainly help you in this matter.

    1. it works normally on another computer?

    2. did you try connecting to different USB ports?

    Please follow the methods.

    Method 1:

    Run the troubleshooter of material and check.

    See the link.

    http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    Follow the steps and check if it works very well.

    1. click on the Start button.

    2. click on run.

    Take your letter of the hard disk as G:

    3. in the Run dialog box, type attrib - r h s/s/d: g:\*.* press ENTER.

    Note: replace the letter g by your letter of the hard disk.

    Using the windows-related issues feel free to post on the Microsoft Community Forum.

  • WIN8 usb3 problem/UX31a/iomega ego

    Hello
    I have an Asus UX31a supplied with Windows 7. After that installation of Windows 8 my external drive, iomega ego 1 TB usb3, allows only reading, I can not write anything on the disc. I wonder how to solve this problem.
    The drive worked perfectly on this laptop with Windows 7 and works very well in other laptops with Windows 7 or Windows 8. Other discs, I've tried, usb2 and usb3, work well on my ux31a from asus with Windows 8.

    Kind regards

    Jorge Cunha

    I have an easy solution that will have to do for now.

    I had Windows 8 PRO and Iomega eGo worked well, as soon as I put it in my new laptop, it didn't.
    Got an error saying disk was corrupt.
    Solution was to use an extension cable UBS 2.0 in order to avoid the 3.0 to my new laptop USB port and it worked!
  • Iomega home media cloud edition & usb storage

    Hi, I am running low on space on my Iomega nas media so server thought I would use the USB port to add extra storage space.

    The new drive appears ok and appears as a share, but I can't seem to get my dlna client to see any media on the drive - I have configured to be a media player and re-scanned but I see nothing on this record from my TV.

    Is there anything else I need to do?

    See you soon

    Jimmy

    Seems a bit unnecessary addition of support for USB drives then...

    In the end I got it working by manually adjusting the Twonky media server to check the USB key, was a bit of a faff however.

  • Reset & drive usb Iomega GDHDU2 information

    I have an Iomega GDHDU2 USB drive apparently with a drive hard Samsung HD 103SI in that I am connected to a Bell Expressvu receiver sat TV like a VCR digital and used for awhile, but then disconnected after a few questions but now try to use it again without success. Receiver recognizes that it is there and begins a reboot that never ends. Is it possible to do a factory reset so that the receiver will make a new format and use the player? When I try to find an Iomega site towards what I am redirected here which has no information on this record and there is nothing on the site of Samsung. If I connect it to my computer device manager considers it and says it's good, but explore can not find so I can't use it or remove the content and can not find a way to reformat. Help!

    Note of the moderator; issue published; added disc type

    Thanks for your reply. I don't have to use it I used a partition manager to access the hard drive to find that my sat receiver had formatted it with non-windows partitions. Changed partitions back to windows and then when I connected to the sat receiver he again did a full format and it works now.

Maybe you are looking for

  • Get the beta version of the UI across all PC

    So I was one of the lucky people the opportunity to try the new UI set up, but I got it on a PC that I do not particularly often. Is it possible for me to get this UI on other PCs or is it stuck on one on which there are currently?

  • The Mail (version 9.2) in El Capitan app keeps about a week of e-mail messages in the Inbox

    Then the application Mail (version 9.2) in El Capitan keeps about a week of messages in the Inbox.  This is different from what I experienced in the Mavericks and earlier versions.  Is there a way to fix this for all e-mails are kept unless that spec

  • Windows update error 80070490

    Windows error 80070490 update - have tried restores back few months but still not fixed. Trying to solve what thopught he had resolved, but didn't. I don't think I can be a windows DVD or the disc so how to solve this problem? Thank you

  • Webcam driver installed, windows search pilot, driver not found

    I recently changed from windows xp to vista, I bought a new webcam (philips SPC 230NC easy) and installed the accompanying cd. When I plugged the camera that a box appears in the lower right of the screen (install the software) it says not identified

  • Keep the focus on the same button

    I have two vertical frames side by side. The left one has a few buttons and the right one has something else that is not active. When I click on the third button on the left, it is highlighted. If I do something on the right, the cursor automatically