Iomega eGo BlackBelt Portable Jet Black hard drive 1 TB external

Similar Questions

• Backup hard drives internal and external to separate the partitions on an external drive of a second... ?

  I want to back up an internal hard drive (let's call it 'A') and (B) external drive using Time Machine. Both are 1 TB in size, so I bought a 2 TB external drive and created two partitions (C and D) on this subject, only to receive each backup. So:

  A = internal hard drive

  B = external drive (for "overflow" files)

  C = partition to external drive for backups of A

  D = partition to external drive for backups of B

  My question is, can I set up Time Machine so that A back up C, every time the 2 TB drive is connected, and B backup up to D whenever the two external drives are connected? I thought it would be possible, but at the opening of the Time Machine preferences and selecting D for the first time I get a message saying:

  "You want to stop backup up to 'C' and use"D"instead or back up at the same time?

  If you use the two, Time Machine will take turns backup up to "C" and "D". »

  I wonder if it would just be easier to return to a single partition on the hard disk of 2 TB and have the time machine to perform a backup of everything, that is, both A and B?

  Last question: I'm doing this to improve Yosemite to El Capitan. the operating system affect what I'm trying to get time Machine to do?

  Thank you!

  Use Time Machine to back up or restore your Mac - Apple Support

  I have a non-partitioned device TM backup of your data and your OS disk at once

  If in case you partition and drive "B" needs more than what is on the partition and drive 'A' don't you avoid warning.

  update of the OS is fine, as it will give an output back to a previous TM operating system where you need it, but it is compatible across versions.

• PS Portable CS6 - which hard drive to choose?

  I'll order a laptop to work very quickly. I'll need a laptop for travel and my orders the Dell company. Essentially, here's my build so far (see below). I read many forums and articles on hard drive configurations. But I am limited to a laptop so I need to prioritize! Please offer some advice on my build so far, harder and any room for improvement, or even if I might have exaggerated (is it possible? haha). I get an internal hard drive and I want to choose the best for my application. I work with files for printing. I think that up to 48 "x 64" x 600 dpi of the multiple layers. I go to the maximum RAM to reduce the need to drive to work. In addition, when it is docked, I'll have double 22 "monitors.

  15.4 "Dell Precision Mobile Workstation M4700

  Win 7 Pro 64-bit

  Photoshop CS6

  Intel i7 2.8 GHz processor

  NVIDIA Quadro K2000M w 2 GB GDDR3

  32 GB OF RAM

  Drive options:

  512GB 2.5 "(SATA3) mobility Solid State Drive (very expensive)"

  256GB 2.5 "(SATA3) mobility Solid State Drive (expensive)"

  1 TB 2.5 "hard drive 5400 RPM

  750 GB 2.5 "7200 RPM hard drive

  Thoughts? Thank you very much!

  Double the performance already super fast SSD storage is intoxicating substance.  Once you use a system where the stuff that used to take seconds now is instant, it is hard to believe that you never set up with less.

  If you feel you can hold a total of 512 GB of storage and to keep your master files in an external drive or a network location, then the RAID 0, 2 x 256GB option can be a good.

  Even a single internal SSD flash drive will be faster than any HARD drive equipped system, you used by far.

  So, it comes down to whether you prefer more flexibility with the Mini PCI card slot or more speed.

  -Christmas

• Satellite M70: HARD drive not recognized external - various XP error messages

  Hi all

  I have a Satellite M70 and I have a Western Digital external hard drive.
  Initially, it worked great, I was able to put my large collection of music, etc. on it and run a computer off to save space on my integrated HD.

  But recently I had problems with XP not recognizing HD or be able to write in it. It appears in my computer, then disappear, often randomly when I write new files to it.
  I reformatted the hard drive to NTFS as it ran originally as FAT32.

  I updated my BIOS as well, but I'm out of ideas.

  Anyone else had similar problems with XP?

  Thank you

  Will be

  Have you thought about external HARD drive failure?
  Perhaps failure of HARD drive and, therefore, it cannot be recognized correctly.

• My old computer crashed. I was able to connect his old hard drive as an external drive to my new computer. I would like to get all my old favorites (there are no prior backup on the old disk).

  Is there a file where the bookmarks are stored which I can copy from the old drive to the new to restore old bookmarks? Thank you!

  (I still have the original files of Firefox on the old hard drive, including one that presumably contains all my old favorites).

  https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• HP personal media drive hp0000: remove the hard drive from the external area.

  My external hard drive does not work and I would like to remove the drive from the external hard drive case.  How to open the short cut through the plastic box?  I have other cases of emjpty for the hard drive.

  Access to the internal hard drive: methods and variants

  (1) open the support HP Pocket Drive is as simple as peel back label hardened plastic on the end of usb connection and to extract both little phillip screws hidden. Once the removed screws the drive carrier will slide on the front of the case and the hard drive can be easily replaced.

  (2) the same video

  (3) it is very easy to detach. With a small flat screwdriver take the label on the back cover. This will reveal the 2 small Phillips head screw. Remove them and gently pull the back cover. Then gently push all inside the well hard drive that forward into the aluminum housing. Careful not to push the reader through the case and on the floor.

• How to extract the EFS certificate to old hard drive as an external drive

  I got a Windows XP Professional computer on which I had encrypted files using EFS. Now, I have a new computer, Windows 7 Home Premium, but I did not export the old WinXP machine EFS certificates/keys. I can't start the old machine again because I had to open a lot of "stuff" to remove the hard drive. Now I have the physical hard disk from my old machine in a HARD drive enclosure, and it is connected to the new Windows 7 machine via a USB port, that is, as an external hard drive.

  My question is: can I extract my the old hard drive Windows XP EFS certificates/keys if it is connected as an external hard drive? Or I have to start my new computer in Windows XP with the old hard drive, then export the certificates by using the normal procedure?

  Thank you...
  -Ajoie

  If your old rained hard drive works fine on the new machine, then you can make use of EFS certificates/keys

• How to access the files after you put the hard drive in the external case

  I dropped my laptop and it is split.  I bought an external case for hard drive, only to discover, when I try to access the files, I'm not authourized to do.  I know the password, how do I access files, without having to pay someone a large sum of money, "with no warranty.  When I try to access it using the security feature to take possession of the files, they always come to the top an unauthorized.

  Hi martinez_gerald,

  In addition to the suggestion of Chafflube, you can consult the following KB articles and check if it helps.

  1. What is the exact error message you get when you try to access the files?

  You can read the following article and check if it helps:

  Error access is denied"when you try to open a folder

  http://support.Microsoft.com/kb/810881

  Also read the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• To install the new eSATA / SATA to USB 2.0 hard drive in an external enclosure but the computer does not recognize the drive in disk management

  I have an old computer with installed Microsoft Windows XP SP2 and 3.  I bought a new hard drive and also a new external hard drive for her case.  I have correctly installed the hard drive inside the enclosure, and I think that I have installed correctly (in the motherboard SATA port) eSATA port, according to the manufacturer's instructions.  I plugged everything... first eSATA, then power and power switch.  I restarted the computer, and I chose to analyze disks in disk management.  However, the new drive is not recognized.  The SATA port on the motherboard could not work or did I buy the bad, perhaps, hard drive enclosure for my system?  Or something related to the software?  Thank you.

  Hi Donnadream,

  Connect the hard drive to another port and check if that makes a difference

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 2: Download and install the latest drivers from the chipset of the computer or the manufacturer of the motherboard and check

  Step 3: Hard disk can be turned off in the BIOS; You may want to enable

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, it is a hardware problem, contact the manufacturer of the hard drive for a more specialized help

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The hard drive on an external drive without virus imagery etc.

  If I do a system image on an external hard drive before you perform a cleanup of the system, any malware virus etc. will load in the image. In addition, if a third party application is required to make the image, all of the recommendations.

  Hello BrianRobertson,

  If you already have a virus on your system, then it will be reported in an image. Unfortunately, once you have a virus, you have. You must get rid of it before you attempt to create a system image.

  With respect to the third-party imaging software I recommend EaseUS Todo Backup Workstation. This is the application that I use. This particular application is not free, so you'll have to participate with little money. However, EaseUS proceed with a free backup application that you can download here: http://www.easeus.com/disk-copy/ it's called EaseUS Todo Backup free.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• hard drive backup on external drive

  How the backup of the harddrive (vista) on an external drive if you have all programs on the computer to the external hard drive, a dell technician said it was a process with a single click

  It depends on your version of Vista, as to if you can do a full backup of the computer; including programs and the OS, etc.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  How to use the Vista computer backup and restore

  Or use 3rd party software: http://www.acronis.com.au/homecomputing/products/trueimage/

  See you soon.

  Mick Murphy - Microsoft partner

• No number for a hard drive 1 TB external backup Dell Service tag

  I bought this external hard drive on an online site and it has now stopped working. When I try to go to dell support online, I need to enter a service number and my product has no service number... I entered all the other numbers printed on the hard drive, but it does not recognize one of these numbers... Desperate... Help, please... Sharad CN: 04RPHY-72627 - 31H - 029S SN: NA52YXAS REF: 1F5AP4-500

  Only systems transport service tags - no devices.

• Can't access to my (e :)) error Hard Drive e/s external device (0 x 80070057).

  Original title:

  Can't access to my (e :)) external hard drive)

  I connected my Seagate Freeagent drive a couple of days, after a long period of disuse. The first time I opened it, it works beautifully. But after I closed it, it disappeared from my computer. I managed to get the letter drive (e), but can not open it, make a device i/o error (0 x 80070057). I'm at my wits end. I have a lot of personal files on the external hard drive, and I really don't want to lose them. Can someone help me?

  YAY! I finally got to work. Hallelujah! I don't know how I did it, but it works now. I just unplugged the power cord from the unit and waited about 30 seconds, then plugged in again, and it started working again. Sorry to bother any of you nice people. That's great!!!

• After I installed Windows 7 on a new hard drive, my 3 external drives are not get detected.

  I have three external hard drives and they worked perfectly, until I had to renew my hard drive with a new drive with a new installation of windows 7. Now my computer will not reconise any of the readers. they do not show in the Device Manager either. It is said that all the hubs work perfectly. USB flash drives work OK. IM puzzled. All drivers have been updated with the driver update

  Thank you very much

  Original title: external hard drive

  Hello

  You get the error message?

  Method 1: I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you to check if the drives are displayed in disk management. If the drive is available in disk management, and then assign the drive letter.

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Portege M200 - Boot and restore ghost hollow Portable USB image hard drive

  Hello

  I work in a company with several M200.
  I want to boot from the USB portable HDD and run a ghost image.

  How to recognize the drive hard usb and boot from it?

  You want to use the picture ghost Toshiba s?