Iomega Zip Drive old (PC) for Mac SCSI drives

I came across my old Iomega Zip 100 Drive I used with my PC in 1999.  It is a SCSI drive.  I'm all about Apple and Mac during the past 10 years or so.  I have access to a Windows computer with, I think, Windows 98 on it. Is it possible to get pictures off the Zip disks?  I don't want to get a SCSI to USB cable and the ruin of my Mac. The Mac would even read the saved files.  No, I don't know how I saved them.  I just pictures on disks.

Any information would be greatly appreciated!

PMZF

Are you sure it's a SCSI disk (it's relatively rare to find SCSI on a PC)? There was an external parallel version of the Zip 100 drive. The connectors are DB - 25 for both versions, but the SCSI model has a special icon of SCSI ID and termination switches. The Iomega cables parallel and SCSI had different colors. Do not confuse the models. Do not plug in a parallel to a SCSI port, or vice versa.

In any case, if the Zip drive in question in fact can be successfully connected to the Windows PC (98), you should be able to read the discs, Zip it. There are a few methods that can be used for a transfer to a modern Mac. Is - that computer has Ethernet?

What exact model of Mac is this? You have access to a USB floppy drive (which can be connected to a Mac)?

It would also be possible to locate a Zip USB drive that could be linked to a modern computer. It would be a matter of moving the Zip disks only.

Tags: Windows Software

Similar Questions

  • Transfer from old office for Mac to new Mac Air

    Hi, I just got a new Mac Air and have my old office for Mac on a hard drive. I am able to transfer to my new computer and re - install?

    It really depends on how's old office.  Office 2008, no.    Office 2011, you need to upgrade to a free update specific as explains it my tip:

    http://discussions.Apple.com/docs/doc-8811

    There are free alternatives to the office so

    Alternatives to Microsoft Office

    Documents you should be able to open with any version of office.   It's just the version of Office that makes the difference on El Capitan.

  • Satellite M60: Need a parallel port to connect the Iomega Zip drive

    Hi guys,.

    I have a Satellite M60 and I want to transfer files from my Iomega Zip drive.
    My laptop is not has a paraller port, so I bought a converter to operate, but there was no result.

    Is anyone of you know how to solve the problem and finally reach my driver ZIP of my Satellite in order to transfer files?
    Do I need another converter?

    If so, when is? Or do I have to buy a PCI card with paraller port?

    Any response will be appraciated

    thanx

    Hello

    I've never used a converter USB / parallel but a USB-to-serial port converter and I had very bad experience of such pieces of witch.
    AFAIK this adapters don't work properly.

    Therefore, your suggestion is not bad to use the PCMCIA card with a parallel port.

    Check first of all in your user manual what cards are compatible, then you can try to use this card.

    I think it would be the best solution to connect your Iomega Zip drive to the M60 laptop.

    Concerning

  • Iomega ZIP and JAZ dirvers for Windows 7 64-bit

    I'm looking for drivers 64-bit Windows 7 for old Iomega ZIP and Jaz drives.

    They are available anywhere?

    So far no luck...


  • Currently using Elements 8 with the Organizer, tags, etc. on a Windows PC.  Buy MacBook Pro and want to put 13 and first elements? on my Mac.  How is it difficult to download the old files for MAC?

    Buy Macbook Pro and thinking about buying a package Elements and Premiere Elements for my new Mac.  I've been using 8 items for a few years and several thousand organizes and editing photos on a Windows PC.

    How hard is it to transfer from the PC to the MAC?

    Is my pictures organized with the names of tags etc all back from 8 to 13 new elements?

    Hi Robert

    You can find these links in the transfer of your catalog to your mac:

    Guinot

    Using Backup, Restore to move the catalog | Organizer | Elements 6 or later version

  • Old version for Mac

    Hello! I want to get Creative Cloud, but I have Mac OS X 10.7.5. Is - this CC14 should I get then? And is it the same price as CC15? Thank you, Mia

    HI Maria,

    With 10.7.5 Yes you have an older version of the creative cloud, however the price remains the same.

  • Zip files and security of Mac?

    Community salvation.   I am new to the Mac world. The '.zip' files are safe for Mac users to download and open emails? I've read various articles or not to allow the '.zip' on my Mac files.  All would you recommend them?

    Thank you

    Jim

    It isn't zip (compressed files) files, this is where you download from, and what content is inside.

    Always download the software directly on the developer site not elsewhere.

  • Connection of the old Mac Iomega Zip to the Mac Mini

    I couldn't find an answer to this common question I could map to a solution to my problem, so:

    I have an old Iomega 250 MB Zip disk that I used on a Mac of pre-iMac. It is a parallel port connection. I'm trying to use it on a Mac mini running El Capitan. I am trying to connect a parallel cable mini / USB. I am recovering some important files from this bygone era. I have the Mac Ziptools drive.

    I don't know if it's to see the player: he seems afflicted to a connected player ID, but can't open it nor report any info on this.

    So, in fact do this as shown? If this is not the case, how can I do this? Thank you.

    I do not know its being a common question. At least not in this decade.   My G4 has a Zip drive, but it dates back to 2002.

    I don't remember if the readers required Zip one driver special for which I suspect 99.999% there is no version of El Capitan.  He could have that included in the operating system returns with OS9, but because people have stopped using Zip disks long ago should not appear in a newer operating system.

  • I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' Mac; failed hard drive. Everything seems fine, activation passes through, but when I go to start the program, nothing. Nada. No respo

    I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' MacBook Pro; failed hard drive. Then, new facility, MBP 13 "most recent. Everything seems fine, activation ADOBE passes through, but when I go to launch the APPLICATION, nothing. Nada. No response from the application. Suggestions?

    Acrobat 9 (and 8, of course) is not compatible with your operating system.

  • How to install Firefox for Mac USB 3.0 drive external and run portable Firefox?

    I recently acquired a new laptop MacBook Pro 10.9 Mavericks, and I'd like to install Firefox for Mac USB 3.0 hard drive Mac compatible external and import my 16 MB of legacy of a compatible PC USB 2.0 HD bookmarks and Firefox run as a portable application, as I did for years on my EOS 7 years would be Dell Inspiron XP laptop.

    Feasible?

    If so, I would like to do the same with Thunderbird...

    Hello

    There are portable versions of Firefox and Thunderbird, but Mozilla does not offer them directly. You can get of PA.com. Links are below:

    All you have to do is open and point your USB installation directory

  • Printer driver for mac 10.5.8

    Many blogs suggest not to install the HP software but just install the printer drivers. What printer driver for hp officejet 6500n for mac 10.5.8 need me and how he do it please?

    Hello

    These tips are for users of 10.6 and 10.7.

    Being under 10.5, you can download and then install driver HP.

    Here is the link, if I had the model correctly: HP Officejet 6500 Wireless all-in - One Printer - E709n

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-67776-1 & CC = US & DLC = in & LC = on & os = 219 & Product = 3795406 & sw_lang =

  • Old Core Solo mac mini for Media Server?

    Have an old Core Solo Mac Mini that I can't seem to part with them. Already got a new.  Can I use this one for what it is now?  Media Server? I think those are the specs of the old mini... Apple...

    Apple Mac Mini A1176 2006 Desktop Intel Core Solo 1.5 GHz 512 MB 667 MHz DDR2 SDRAM

  • My 10.2 final cut does not recognize my Lexar 512 ssd drive which is formatted for Mac Os journaled and completely empty

    My FCPX 10.2 does not recognize my Lexar 512 ssd drive,
    who is formatted for Mac Os journaled and completely empty (already formatted),
    He comes to see my ssd as an SD card once I click an import media.

    I had once FCPX 10.0.8 and with which I was able to edit with my external Lexar 512 GB SSD drive,
    that was seen as a normal external hard drive with all my projects and events.

    I'm not using Time Machine, never used.

    Any thoughts, why can't you do more?

    Here is a screen from my drive information: http://i.imgur.com/3TrITKf.png.
    and here is a screen in FCPX where he sees my ssd as external device: http://i.imgur.com/PB4dgkB.png

    Thank you
    Federico

    SO it is not working properly. The drive is empty. Make a new library and save it on the SSD drive.

  • Can I download originals to iCloud for mac before move library of photos on external hard drive

    I moved my library of photos from my laptop on a thunderbolt 2 TB external drive. I opened pictures (option click) and chose this place to open. Then I opened the photos and click preferences on use this as library of photos of systems. I checked iCloud and he said that I had referenced files that could not be downloaded and consolidate them. I do not know which files are "referenced". These would be photos of the former library of iPhotos that was imported in the Photos. I have more than 20,000 pictures on iCloud. Will they all finally downloaded to my new library of pictures on the external hard drive? Or I have to download the originals on my mac before moving the library of photos on the external drive. I maybe need all start over and do it - except that I don't have enough space on my drive SSD from Mac to keep them all.

    Any suggestions? My plan was to have my photos on iCloud, the originals on disk external hard and then the mac and HD on my time capsule. Access iCloud on my iPad photos air and iPhones, iPad pro.

    When I look at the size of the library of photos in my pictures folder, it is about 12 GB - there is also an iPhotos library in the images folder which is 63 GB. I think I have to combine these files but don't know how to do this. If I also moves the iPhotos library to the new external hard drive which will be done automatically. Obviously I have not deleted the folders in the library on my Mac until it works.

    They must synchronize the external disk if it's where you said Photos your library is (that you have).

    Try to create a new smart album to see what is not downloaded.

    iPhoto for pictures

    iPhoto Library from iPhoto to picture for Mac

  • Y at - he driver DAQ for MAC or Linux

    I know about Labview version for Mac or Linux.

    I just want to know if it's driver for the acquisition of data for MAC or Linux, which can take in charge USB DAQ.

    Thank you.

    Hi Alex,

    Lynn is correct. For the use of the DAQ USB OR with Mac and Linux, the best hardware and the only driver to use is NEITHER-DAQmx Base. The Readme file lists which specific devices are supported, specific Linux and OS X versions are supported and that has hardware is supported.

    [1] NEITHER-DAQmx Base 3.4 for Linux

    http://Joule.NI.com/nidu/CDs/view/p/ID/2128/lang/en

    [2] NOR-DAQmx Base 3.4 for Mac OS X

    http://Joule.NI.com/nidu/CDs/view/p/ID/2127/lang/en

Maybe you are looking for

  • How to transfer a file Jpg of Documents to Photos?

    How to transfer a document Jpg file to the Photos file?

  • How to boot directly to the firefox start page?

    How is it possible to boot my computer directly into the Firefox start page? I use Windows XP Malcolmy

  • Linksys E2000 router slow connection.

    OK, so I use 2 with 2 routers, for me and my father, another for my brother and sister.  We decided to get rid of the other router and make our cisco E2000 our primary router, but everything on the router configuration has been deleted, so we had to

  • Remove the BB Client

    Hello can someone tell me how can I remove a client of the Bosnia and Herzegovina followed brother? I deleted it from the bb-hosts file... but the webside shows purple color on the sides... If I press 'full view' I see the old system. The old system

  • IPS smartnet

    Hello I have two IPS devices. I use only a (second I like cold backup). If I want to smartnet that one purchase for my active IPS device will not be possilbe if my active IPS crashes to move my smartnet account to my backup IPS device? Thanks in adva