iOS 10.0.1 WiFi slow problem

Dear concern,

I use iPhone 5s and recently I updated my OS and got iOS 10.0.1. But I feel slower speed Wi - Fi and my applications doesn't work does not correctly. My other device (laptop and other smart phone) running smoothly as before.

Please provide your comments. Thank you... Adrian

Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

(1) restart you device. If a normal restart does not help, hold down these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

(2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

(3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

(4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

(5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

(6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

(7) try the device on another network, i.e., neighbors, the public coffee house, etc.

(8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

https://support.Apple.com/en-us/HT201252

(9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

Council: https://discussions.apple.com/docs/DOC-9892

Tags: iPhone

Similar Questions

  • Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

    Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

    Please you not to Apple here. This is a user forum.

    Try som battery tips to save:

    Battery Saving Tips for your beloved iPhone

  • iPad 2 iOS 9.2.1 WIFI randomly turns off by itself

    iPad 2 iOS 9.2.1 WIFI randomly turns off by itself. What can I do to fix?

    the ITI is probably just the wifi in your House and not iOS

  • Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

    Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

    No, not at all. Maybe if your were to describe the issues a little more in detail, someone might be able to help.

  • IM update ios 9.2, in that the problem is the alrts led flash does not work?

    How about the alerts led to the iphone flash 5? IM updade ios 9.2 trow wifi. Led flash alerts do not work pls help...

    Hi Armsloy91978,

    Looks like you were the LED Flash option for enabled alerts until you updated, but it doesn't seem to work now. I would check that it is always enabled everything first:

    Turn on the Flash LED for alerts. Go to settings > general > accessibility > Flash LED for alerts.

    From: LED Flash for alerts - iPhone

    If it is checked, then turn it off and leave the settings application and any other application you get Notifications. You can also quit all applications running if you don't know you have them all just to make sure:

    Force an app to close the iOS

    1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
    2. slide to the left to find the application you want to close.
    3. push upward on the overview of the application to close.

    When you have done that reboot the device and test again the question:

    iOS: switch off and on (restart) and reset

    Thank you for using communities of Apple Support, let us know how it goes!

  • Iconia A1-830 has a Wifi connection problem when 3-5 meters

    I bought Asher Iconia A1-830 at BestBuy and after 10 days, I discovered the Wifi connection problem. If you stay near router (1-3 meters) the WiFi signal is good (not excellent). If I go into another room - Wifi connection is poor or disabled. I changed it to another (same model). The second model is perfect only 1.5 months and now she has the same problem with wifi connection. Can someone help me? Maybe the problem in my router, but why it worked 1.5 months?

    Yesterday, I received my return of repair Acer Iconia. They wrote the reason of the problem: reconnected hold of WiFi to the motherboard. It now works like new!

  • Password WIFI WRT110 problem

    Hello world

    I have a very strange problem.  First of all, I told chapter of wireless security WPA and typed in my password.  However what connection in my name of the wireless network of my password never worked.  Second, I completely disabled security and tried to just connect without any password, but I was still asked a password however.  I checked and checked and saved the settings by ensuring that security has been turned off, but I was still asked for a password when choosing my wireless network!

    I could probably restore my WRT110 to factory settings, but I don't want to lose the other configurations as some open ports and IP addresses, that I opened for the firewall.

    Is it possible for me to fix my WiFI password problem without restore factory default?  I just need to understand how to operate the the WiFi passpharse.  Here's what I have here:

    Security mode: WPA Personal

    Encryption: TKIP

    Password: 0sunspot0

    The key renewal: 3600 seconds

    However, when I get my wireless network and try to connect by typing in 0sunspot0, I get an authentication failure.

    I'm doing something wrong?

    Thank you

    Victor.

    Save all your settings, so you can restore them after a reset.  Remove the password completely and try to connect without password.  If successful, go back and add WPA2-AES with a new password without special characters.   No test.  If no joy, hard, reset the router and restore it from your back upward and try again.

  • HP Pavilion G6 - no WiFi Signal - problem "Broadcom 4313GN.

    Hello

    My laptop (HP Pavilion G6, PN: QG846EAR #ABU) with Windows 7 Home Edition is to have through its WiFi connectivity problems. The WiFi hardware is recognized as "Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n" by the Manager of devices but it cannot detect all autour WiFi signals. I tried deactivating and activating it by FN - F12. This action works, but does not affect the situation. Initially it was the driver version 5.100.82.82 as of the 20.05.2011.

    I found two new updated driver from Broadcom and HP sites, but none worked. (ver: 5.100.82.95 - date: 1.4.09 and worm: 5.100.82.139 - date8.5.2012)

    I restored default Windows 7 Home but this does not work either.

    I started with Fedora and Knoppix live CD but none managed to see any signal, even if the two detected the correct WiFi hardware.

    I have checked and then changed the values in the BIOS by default, but this did not help.

    When a WiFi USB is plugged in, the PC works fine.

    Under the battery, the WiFi device is referred to as "bcm94313hmgb".

    Any idea?

    Say hello to new mscag.

    Thus, one of the sons is not connected?  It's probably the cause of your problem.  Take a look at your notebook PC Maintenance and Service Guide.  Specifically, look at page 54, which deals with the removal of the WLAN card.  He says that there should be two wires to disconnect (main and auxiliary antennas).

    I can't say very much in the picture, but it seems that you should be able to reconnect the loose wire.  I suggest this thread connected and if this does not resolve the issue I would then contact HP support.

    HP to support an appeal to the United States / Canada you can call to the 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

    Let me know if plug this cable solves your problem.  Have a great rest of the day!

  • WiFi intermittent problem. Win 10 think it is connected when there is no Internet.

    WiFi intermittent problem.  I have a 2 month old Dell Inspiron 15 5559 with dual band Wireless AC 3160 adapter Intel.  I connect via WiFi, start Pandora with Chrome and everything works very well for a few hours.  I monitor the status of the WiFi and noticed that when the speedometer drops to simple numbers temporarily, then resumed at 50 Mbps or more a second or two later, my browsers (Chrome, Firefox, IE, Edge) no longer work even if icons indicate "connected, secure" and LAN activity continues.  Pandora and all other browser activities cease until I have disconnect and reconnect.  The router, I had this problem with that is a TP-Link wireless-N that works perfectly with other computers, but I purchased & installed a D604 of D-Link router wireless AC to see if this can solve the problem.  It has exactly the same problem on both the 2.4 and 5 GHz bands.  Device Manager displays an Intel driver version 18.11.0.8 dated dated 22/06/2015 apparently normal and no! or? any where in the list of devices.

    So the obvious conclusion is that when the power of the signal is temporarily less than 10 Mbps for a second or two, then returns to the top 10 Windows thinks there is a good WiFi connection when it is not.  Disconnect and reconnect always solve the problem, but it's an obvious bug, and it's a pain.

    Hello

    I'm glad that you finally got this driver to install.  Microsoft has done a lot with Windows 10 trying to reduce the energy consumption on laptops.   In some ways, that has caused some problems with the wireless, making cards more susceptible to interference.   I hope that this driver will clear up many of the conflicts and problems that you see.

    Let us know how it goes.

    Todd

  • iOS 9.2.3 wifi problems. DIFFICULTY TO PLEASE AS SOON AS POSSIBLE

    Since the update to 9.2 & up to my

    phone had bad problems with wifi. My modem is in the living room and when I'm in the living room I have 2 bars. I have 2 other iPhones a Tablet and a computer laptop while on wifi and they all 3 bars at the same time but my 6 on 9.2.3 is not (while in the same room as the modem) then when I go upstairs to my room, I have no wifi at all maybe sometimes I will get a bar but it would still be a great connection. I did tests of every iPhone & my 6 speed is 4 times slower than my iPhone 4 and a little more than half the speed of my 5 s. I did everything. Forgotten network, re inserted the sim card, reset the network settings, soft reset even changed the dns, but nothing works. I can still use my wifi in the comfort of my room with this iOS 9 x. I noticed every wifi around me all have a bar even my neighbors but my own? I am feet away from? This is ridiculous and needs to be repaired as soon as POSSIBLE

    Did you ever ensure that your router settings are optimized?

    Recommended settings for the WiFi routers and access points - Apple supported

  • Ios 9.3.1 WiFi problems

    My iphone does not connect to wifi after ios 9.3.1. Is there a solution? Thank you, Karl.

    I have the same problem. Try this link, it might help you

  • iOS 9.2.1 wifi problems (iPhone 5)

    Hello world

    still using my iPhone 5 as my main but lately known problems of major wifi phone: she just will not connect to my wifi unless I force to (the wifi menu to minutes until he shoes he has connected to wifi). When it shows then it is allegedly connected to the wifi I don't get any 'real' connection - the phone charge not any whatapps, web pages, etc... So I have to stay in my mobile network to be online. It is so incredibly annoying since - let's be honest - without an internet connection, the phone is almost useless! Phone works in other wifi. I first noticed this problem (a few days) after the update to 9.2.1.
    Another iPhone (4S and 6 - even 2G) works fine in my wifi iPad and the MacBook!

    I've read several discussions about this sh * TTY number and do not operate again. Is it possible that is has something to do with the iOS 9.2.1? All other mobile devices iOS in my household are not running this version and work correctly...

    Things I tried and it does not work:

    -reset the router (However it obviously was not the source of this issue since other devices worked properly)

    -set the new DNS ("8.8.8.8" - read than some part... bullsh * t!)

    -reset the network configuration

    -power off iClould

    "Have you tried turning and turn it on again? Yes, I have! Thank you Apple!

    -soft reset

    -hard reset (return to factory settings)

    Still does not connect. As Im writing this post I think more than its due to some sh * programming iOS 9.2.1 ATS... If this is the case, I consider that it is incredible that Apple does not allow to go down to another version of the iOS (as if it were possible, that's what I would do before I put my phone back to the factory settings)!

    So I hope that there is someone out there who may have experienced the same problem and can fix it somehow

    Update: the iPhone connects to my wifi 5 first Minutes I turn on wifi phone. After 5 minutes, it will not be any connection to the internet that it shows that I have a strong wifi connection... When I pass it still works on my phone it again will run for 5 minutes...

    iPhone works fine with wifi systems and it worked with mine for 2 years now until a few days after the software update

  • iOS 9.3 wifi connectivity problems

    6 s big boy worked on 9.1.2, but since the update to 9.3, Internet (wifi) cut every 30 seconds, and since I don't allow cell to use data, I find offline about 16 hours a day because of this OS. My phone is 16 hours a day offline... Because of this update...

    Thank you...

    OH Yes, I've tried forgetting the network and join (to do a hard reset in between) and had no luck at all. No other device wifi in our House is having these problems and we have a LOT of speed and a very strong wifi signal...

    HRU, whatdoyaknow... I had to hit send 6 times and cut wifi and turn it back on until my phone to reconnect and send this stupid message.

  • 6 d to iOS 6.1.2 WiFi problem?

    I'm suddenly having problems connecting my iPad4 and iPhone5 to my 6 d in connection Wi - Fi direct mode.  I was not able to connect since the update to iOS 6.1.2 with either.  I can still connect mode "infrastructure" If the device is connected to my work or home network everything first, but don't can't direct connection.

    Someone at - he lived the same problem?  Or anyone was able to connect successfully with iOS 6.1.2.

    Thanks for any help!

    Jim

    My bad.  Found a solution.  I had to "forget network" on each device and re-setup of each of the configurations of device on the camera to issue new passwords.  Could re - connect each device and bring then log in again.

    Problem solved.  Oh, one thing: if any of you have more than one device (I have an iPhone and iPad), you want to have two settings on the 6 d: one for each device.

    Jim

  • iPhone iOS 9.2.1 6s GPS problem

    I recently bought an iPhone 6s have iOS installed 9.2.1.  I am unable to navigate while using Google Maps or Apple maps while driving - the app will have my way vehicle on the side of the road, and it updates my position much more slow that my vehicle is in motion (and usually inaccurately).

    I am in the United States (Honolulu, Hawaii), and while I heard that European users have had problems with their networks with precision positioning with LTE on network operators, I have not seen elsewhere in the United States.

    I spoke with the Apple Support and visited the Genius Bar at the local Apple Store - in the end I have reset my phone as a new phone (manually reload my apps, vice restore them from a backup to iCloud).  However, the problem with GPS, and nothing has changed.

    I am convinced it is a hardware problem and should have a new phone calls, but if anyone has any suggestions or ways they addressed similar questions, I would be grateful.

    I have this same problem, although I have an iPhone 6.  If I recall, this problem appeared some time with iOS 9.1.  I'm running iOS 9.2, I did not update to 9.2.1 yet.  I also have problems with WIFI connectivity as well.

Maybe you are looking for

  • Satellite 1800-314-replacement of the CD-ROM disc

    We have an old Toshiba Satellite 1800-314 the CD-ROM drive appears to be failing - it often will not recognize a CD, or run the applications of one. First of all, the CD-ROM drive is not removable, so the laptop must be open. I'm familiar enough with

  • Why Apple does not have a backup battery for Apple devices?

    Why Apple does not have a backup battery for Apple device? Recommended us that of our full when we are on the road, so they should do a backup battery for their devices instead of other companies do. The backup battery that I use for my iPhone 5 c do

  • Target to host DMA FIFO - actual number of items

    Hello I have a target of FIFO of DMA host using memory block. Under FIFO properties, "the actual number of elements" is indicated as part of 1023. But when I wire a remaining indicator to the 'elements' of FIFO in the host of VI, said 16384 elements.

  • The use of more than 16 analog inputs of a module?

    Happy new year to everyone. The analog input module OR-DAQmx can only support up to 16 channels.  Now serveral DAQ cards provide more than 16 channels, including PCI - 6259M offer 32 entered analog. So, how do dasylab (Ver 11) support more than 16 ch

  • Z230 LTS: G1X51ET: 4 GB of DDR3 RAM, but what type of ECC or non ECC shipped wih the G1X51ET?

    I got a Z230 SFF (G1X51ET) with 8 GB of DDR3 ram, but don't know if it's not ECC or ECC. What type is the G1X51ET contain, it's always the same type that is shipped? Or how can I check that myselvess?  Found nothing in the BIOS or in Windows System.