IOS 10.0.2 cameras does not work (only in black)
Camera and camera back does not work (all black), I reset my iphone from the PC and the phone, but does not please you see in the picture. Help.
It may help to follow the steps detailed here, including forcing the camera nearby application:
Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem
You see a black screen or a closed lens
If you see a closed lens or a black screen when you open the camera app, try the following steps:
- Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
- Force the application to close, then open the camera again.
- Restart your device, and then open the camera again.
- If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.
Just updated to IOS 10 and replace text does not work. For example typing in omg should show oh my God. Has anyone else got this?
I did the old thing: Disconnect to iCloud and sign back in. Unfortunately, he did not turn. The same thing happened on my iMac when upgrading to Mac OS Sierra - I lost all my text replacement. I also did Disconnect from iCloud and inback Panel . Unfortunately, it also didn't do the trick. Anyone know how to restore the replacement text. It is not has resided in the cloud?
After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?
If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.
As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.
There is no exclamation point in the system.
Satellite L300 (PSLB8E)
What happens when you start the webcam app?
All programs-> Toshiba-> webcam
Did you install other 3rd software part as for example the Skype that could access the webcam?
Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
Start Skype for example, check the settings in Skype webcam chose correctly.
It would be really interesting to know if the other software would be able to use the webcam.
By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
Then sometimes it would be possible that this software could block the webcam and webcam tool could not work
Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem
What should I do?
Thanks in advance :D
Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
Webcam is entered correctly in the Device Manager?
I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
I checked the drivers and they work, I have 10 Diretcx and it works.
When I open the camera program, it works well.
I put the camera program is not at initial start-up of laptop.
I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.
Yesterday, I had installed the Skype 184.108.40.206 version and the camera has functioned well, I upgraded Skype version 220.127.116.11 and the camera started not to work.
> Yesterday I had installed version Skype 18.104.22.168 and the camera has functioned well, I upgraded Skype version 22.214.171.124 and the camera started not to work.
This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
You should check if the webcam has been chosen correctly in Skype video settings.
If this does not work, uninstall the 126.96.36.199 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 188.8.131.52 again if not check the 184.108.40.206 a version that worked correctly in the past.
C50 - B PSCMLA-02F00S satellite
I recently bought my C50 Satellite and that you want to use my camera and when I click the icon it tells to connect me your camera. If I go to device manager/imaging services there is no camera there.
I want a video contact in Facebook, my family and the camera does not work.
Can someone please!
Are you using the original operating system preinstalled that you got with your machine?
I assume it must be Win8.1, right?
What happen when you try to use photo app?
My book built into the camera, and that camera thos not inicialize,
I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.
Is there a way to fix it?
The question is: is cam material recognized and detected by the system or not?
You can see in the Device Manager?
after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable
but when open video camera flash is working and also with any another application to camera is working normally
How can fix this?
reset the camera settings after Flash open ligt
HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick helpall I need is someone find my phone on the Sony site and that will be a pretty
go to this site and to detect my model (vaio only)
of the vista 64-bit now, I changed my OS to Vista 32 bit , now my web cam does not work, tried to get the drivers from dell, but they are not available there. My laptop is studio-1537... Remember - this is a public forum so never post private information such as numbers of mail or telephone!
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
I check your firewall settings to see if it can cause a conflict with the season chat software.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I've upgraded to the new operating system on the weekend and I love the new screens and functions - except that now all my camera does not work, can't take pictures (movies are OK). I tried all settings, no combination it will do the job. Restart the phone does not work. Any suggestions?
I would like to peform a security wipe on the device.
To perform a security Wipe please follow the instructions below. Don't forget and allows to do a full backup before erasing all data will be erased when the BB link wipe:
Once the wipe is complete, you can restore your backup. Remember that the data in the backup can be the source of the original problem and restore can restore the problem, as well. To compensate for this, I do not recommend restoring the passage of the backup settings.
I had windows 7 put on my sony vaio, but my motion camera does not work, anyone got any ideas
You will need to download drivers from the Sony site for your laptop model and operating system (they cannot support Windows 7).
I hope this helps.
Application of my camera does not work, it tells me that something went wrong, whenever I try to take a picture, I don't know what's the problem with him. I built in camera on my laptop, and the app is updated. How can I fix?
It is clear from the description that you have problems with the camera application
Here are a few things you can try
Method 1: Download and run the troubleshooter app and check.
Method 2: Synchronize the application license and check.
To synchronize your licenses app, follow these steps:
a. on the Start screen, tap or click on Store to open the Windows store.
b. drag from the right edge of the screenand then tap settings.
(If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)
c. press or click App updates. If you have not connected to the Windows store, sign in using your Microsoft account.
d. press or click on Sync licensing.
For more information, see the link.
Method 3: reinstall
Finally, if all else fails, you may need to reinstall the application. Just right click and click on uninstall. Then install it on the app store
If the problem persists or you want to help, reply to this message
Maybe you are looking for
Does anyone know if Apple has a program of renewal for the Apple Watch? in-store or online? Thank you!
Want to follow this advice, but it doesn't have the choice 'options' on the bar top, nor in any of the drop-down lists. Nor in the right heiroglyphic of 3 parallel horizontal lines. The OPTIONS menu is only in Mode safe? I need to know if I can plan
Hi, I use a s video cable to connect my laptop to TV screen, to extend my desktop mode, but it's only in black and white I need colors can help you, it comes in the color vga lead but the lead isn't on my tv Help
I can't send or receive any emal using Outlook Express. He asks me a password and already checked the settings of the server but no go. Help
original title: VIRUS CONTROL, the WINDOWS firewall, AND OTHER THINGS has NEED of FIXING. I try only to get something done here this morning, my firewall will not remain. My Start button on my home screen appears and with everything else, that's not