iOS 10 bluetooth problems

Since the upgrade to iOS 10 my Bluetooth headsets do not work properly.  I reset the network settings < and > repair devices, but the sound quality is terrible.  It starts ok but then a few minutes into the discussion, he would become unbearable for me and the person on the other line.  I never had a problem with iOS 9.

I have the same problem with bluetooth and iphone car 7 more.  6plus iPhone with ios 10 worked without problems.  can connect to the car, but the iphone does not respond to the hands-free 2010 GMC.  When audio connects, degrades and call fails.

Tags: iPhone

Similar Questions

  • 10 IOS leading to the Bluetooth problem

    Before download IOS 10, I've never known a Bluetooth problem when using my Ford truck.

    Now, when I get a call, the caller does not hear me and I can't hear the caller. If I have my phone in hand and I change the Bluetooth audio to the speaker of the iPhone or handheld and then change it back to my truck, it works very well.

    When I call my truck, using Bluetooth, all parties can hear one another, but incoming calls only on me.

    I tried to reset the network settings, non-couplage coupling phone/truck and restart the phone. Restarting seems to work for the next incoming call, and then it starts again.

    Any help would be great. I received an incoming call on my phone about 10 minutes before you download the update of IOS. The following call (update to the post), the problem is presented.

    Thank you.

    Try to get help from this article, get help to connect an accessory with your iPad, iPhone or iPod touch - Apple Support Bluetooth

  • I am so tired of this bluetooth problem on my iPhone 6.  I am updated to iOS 9.3.  Anything I pair with my iPhone must be within 6 "of the phone.  What should I do?

    I am so tired of this bluetooth problem on my iPhone 6.  I am updated to iOS 9.3.  Anything I pair with my iPhone must be within 6 "of the phone.  What should I do?

    looks more like a hardware delivers then one software

  • shutter of Bluetooth on iOS 9.2 problem

    After that I have upgraded to iOS 9.2, my bluetooth on selfie stick pane doesn't work anymore.

    My other iPhone still on iOS 9.1 works very well.

    It seems that iOS 9.2 has the bug or turn off the bluetooth pane.

    Anyone has the same problem?

    Thank you

    I have a question where I have several buttons shutter blue tooth and neither one of them works on my iPhone 6 s.

    The two shutter buttons still work on my iPhone 5 and has worked with IOS 9.1 and after upgrading to IOS 9.2.

    If you encounter problems with an iPhone 6 s, I think that the back of the phone rather than the version of IOS.

    Others have apparently Bluetooth problems with the new iPhone 6 s and the latest version of IOS (9.2) seems not to have fixed.

    I hope that IOS 9.2.1 will address this, but I don't know if it's still on the list of points for this version Apple.

  • update of iOS 9.3 problem

    Hello all help big problem ios 9.3. Gustomer problem icloud update aktivaet icloud idi password error.

    (ios 9.3  problem) (ios 9.3  problem).

    Your message is not clear... do not hesitate to write a message detailed in your own language, then, we can use our translation service of choice

    First of all, you do not tell us your device - BUT - iOS 9.3 is usually an installation broken for MANY devices - you can read about the problems in the present statutes

  • big screen iOS 9.0 problem

    big screen iOS 9.0 problem

    [email protected] does not work on iphone6. 320 x 480

    And is there any news update 64-bit?

    When I try to download my application with the "Application Loader" I encountered an error. It is said:

    "ERROR ITMS-90096:" your binary is not optimized for the iPhone 5 - new iPhone apps and updates of application submitted must support 4 inches on the iPhone 5 and include a launch image with the size-568 h modifier immediately following the portion images launch filename. " The launch images must be PNG files and located at the top level of your package or provided with each .lpfoj folder if you locate your images of launch. Learn more about support for the iPhone 5 and app launch images by reviewwing 'iOS Human Interface Guidelines' to 'http://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/MobileHIG/I consImages/IconsImages.html#//apple_ref/doc/uid/TP40006556-CH14-SW5' and the 'iOS App Programming Guide"to"https://developers.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammi ngGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-SW12". »

    I have no idea what could be wrong. The application is running in developer mode good. My info.plist XML file looks like this:

    
            UILaunchImageMinimumOSVersion
            8.0
            UILaunchImageName
            Dependent Files/[email protected]
            UILaunchImageOrientation
            Portrait
            UILaunchImageSize
            {320,568}
        
    

    And the image is really "dependent files /" and it is a PNG file. Little frustrating at the moment. I also tried to hack the PNG file in the root directory by renaming the ipa in zip, opening, sticky png, zip and rename it again. Does not work, the results in another error. Test the application locally with a developer certificate is ok, all right.

    If would be really grateful if anyone can share an example of work or at least say that it is possible to present something in the app store at all. At the moment I spend more time dealing with icons, screens spash, certificates, and provisioning of the files then actually coding.

    The "Application Loader" told me I have to change the MinimumOSVersion to 5.1.1 since he dislikes the 4.3 for some reason any.

  • with IOS 10.0.2 - 5s iphone Bluetooth problems

    Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

    It has always worked perfectly before the 10th of IOS.

    And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

    I did:

    Forget this device for the PLT M50 and paired again (several times)

    I did a Reset Network Settings

    I don't know what else to do - but it's a 10.0.2 IOS issue.

    Hello AppleUser2k,

    Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

    The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

    Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

    If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

    Thanks again and have a great rest of your day.

  • 10 IOS bluetooth problem

    Before you upgrade to IOS 10 both Iphone5s and 6 s more, bluetooth in my Nissan Murano 2013 worked perfectly. Now, pairs of thin phone and able to call but Bluetooth drops out when receive call and it happens on both devices IOS 10.

    Walks through the internet and we have tried all the recommendations to reset and re-pair the Bluetooth on the system of the car and the Iphone, but nothing helped.

    The following steps have been tried but compensate.

    1.

    -Forget pairing Iphone and car, turn off Bluetooth (reset Press Home + Power device)

    -Restart the car and re - pair again

    2.

    -Forget pairing Iphone and car, turn off Bluetooth (reset all settings)

    -Restart the car and re - pair again

    Borrowed from my friend Iphone5s who do not have upgraded to IOS 10 and paired the car and bang works perfectly.

    Someone else has the same problem?

    Hello

    See if there is something in this support article, you have not yet tried > get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

  • IOS 6s whatsapp Bluetooth problem

    Call for help,

    6 s after having upgraded to IOS 10,

    When it is connected to the Bluetooth headset, the voice message that Whatsapp is broken.

    Disconnect the Bluetooth, stop the same Whatsapp Whatsapp to uninstall and reinstall.

    Impossible to solve the problem.

    Any expert can give me only a hands?

    Thank you all

    LJ

    Tap Settings > Bluetooth, then turn the Bluetooth off then on IT.

  • Ios 10 Bluetooth connection problems

    Since the upgrade to ios 10. My bluetooth in my car (2016 Hyundai Sonata) guard connection connected and disconnect every few minutes. This never happened to level. Did someone else this experience?

    Hi MoHawk26!

    I see that you are having problems with your car Bluetooth and iPhone communicates is not properly since the update of your iPhone.  I know it's important to be able to connect your iPhone to your car Bluetooth, and I'm happy to offer assistance.  Please follow all the instructions in the following support article under 'If you are using Bluetooth:

    Help to connect your iPhone, iPad or iPod touch with your car radio

    Thank you for using communities of Apple Support.

    See you soon!

  • iOS 9.3.1 bluetooth problems?

    I just updated my iPhone to iOS 9.3.1 6 my Garmin Fenix 3 now does not connect and similar questions in my car and bluetooth speakers. I have reset the settings network without success. I did a reset software on the phone and 'forgotten device' and tried to re - associate once more with no luck. The devices are now not appear as visible on the device.

    Does anyone else know bluetooth issues with iOS 9.3.1

    I have problems with my Garmin Vívosmart since 9.3.1 has been installed, in order to have same question as you have described. The Garmin connects very well with my iPad (9.2.1).

  • iPhone with iOS 10 SE: Bluetooth problems

    IPad 2 Air with iPhone pairing is not possible. The iPad does not see the iPhone and vice versa.  Both run the most recent update of iOS 10.

    But the two may be combined with a 7 years Lenovo ThinkPad.

    Restarts and other beautiful things were made.

    Why the iPad and iPhone cannot be related by Bluetooth?

    If you try to install a strap > share your Internet connection with Personal Hotspot - Apple Support

  • IOS created 9.3.3 Bluetooth problem

    I upgraded from 9.3.2 IOS iOS 9.3.3 two days ago. Since the upgrade, I was able to use my bluetooth FM transmitter in the car to play music and podcasts via a designated FM radio station. The module I use is a Tranzmit BLU ISFM22 iSimple module that is attached to the stock of my car radio. In collaboration with their IOS application, this allowed me to play something from my iPhone through the FM radio. I've successfully used this system with two iPhones (currently an iPhone 6) since June of 2014. My wife and my daughter also have iPhone 6. They have not put upgraded to IOS 9.3.3.  Two of them can easily use the system in my car through the app. I could until I upgraded. So, I can only conclude that the upgrade has affected the ability of my effective bluetooth to access this device.

    (1) I want to emphasize this bug in the hope that it could be addressed and in the hope that others will have to inspect their ability to use your Bluetooth devices. Perhaps this bug affect only a few devices.

    (2) I would like to know how downgrade to IOS 9.3.2 until a fix can be issued. I like to use the Bluetooth transmitter every day on routes. This is a pretty big deal for me to come down immediately!

    Thanks for any assistance on two points. Thanks to all who inspects their Bluetooth capabilities after upgrade and makes account of their findings.

    Apple can't downgrade iOS.

    Contact iSimple Tranzmit to see if they have an update available for the iOS 9.3.3 compatibility.

  • iOS 10 Bluetooth keyboard button publish?

    -That someone knows the problem of the Home Bluetooth keyboard button in iOS 10?

    If you pair a new keyboard Bluetooth, the Home button on the keyboard works very well at the moment. However, if you unplug the keyboard, lock screen of iOS, then reconnect the Bluetooth keyboard. The button of the BT keyboard can only to wake up the screen. She can no longer trigger the Siri.

    I tested the keyboards and the next button, they all have the same problem! The same scenario works very well in iOS 9 or earlier versions.

    Logitech K760

    Logitech K811

    Foldable keyboard Microsoft Universal (model 1695)

    IOS Satechi BT Home Button

    All third party material made suggestions of mine an assumption - at best.

    Barry

  • iOS 10 Bluetooth issues with Visual Voicemail

    I just updated my iPhone 6 more for iOS 10 and use a Plantronics Voyager Edge bluetooth headset. After update I removed the unit and reset the network settings and then paired the headset to my phone.

    I had a few problems with the audio. First of all, no incoming call notification and audio number are routed to the headset. Before the update registered contacts would be announced. If the call was not associated with a registered contact, he would announce the incoming number.

    Second, when access to Visual Voicemail with the headphones plugged voicemail audio output is not routed the headset. If I use it to play music or other audio he paused but always delivers voicemail audio to the phone.

    Has anyone seen elsewhere this behavior or had similar problems?

    On the voicemail, I tried several different bluetooth headphones and I can not listen at all if the headphone is plugged. First, it tries to connect to the bluetooth, but then it just stops. If my headset supports the end of the notice of appeal, I will do a notification on the helmet, which indicates the end of the message before it happens even 5 seconds in the message.

    If I disconnect all the of bluetooth headsets, then I can listen to either on the phone or on the speaker.

Maybe you are looking for