iOS 10 effect on the life of the battery for the iPhone 6 s

Similar Questions

• down in the life of the battery since the upgrade to iOS 9.3 on the iPhone 6

  I had a few battery and load problems with my iPhone 6 since upgrading to iOS 9.3. The battery life seems quite a bit shorter. Also, sometimes when I try to charge the phone, the process is very slow and the phone gets very hot.

  < published by host >

  I haven't noticed it yet. So far no problem.

  Battery Saving Tips for your beloved iPhone

• If I factory restore my iphone 4S so its going to be back on his old IOS? as the IOS comes integrated in the iphone 4S?

  Hi guys! My Iphone 4S is running on the latest IOS and that is causing my Iphone running slowly... So I want to make sure if I restore to factory setting so its going to take my phone back to the IOS comes builtin? Please guys tell me fast...

  Restore an iPhone will not downgrade the version of iOS. There is anyway it downgrade to an earlier version to the latest stable version for the iPhone model.

  (143878)

• Is there an effect on the iphone case flap magnetic 6s?

  I'll buy a magnetic valve for iPhone case, I want to know what causes no damage to phone...

  No magnetism can harm your device

  but it can make the compass in the phone not working when we are close

• Anyone who makes apps for iOS ipad retina and the iphone 6?

  Feed back please!

  Hello.

  Yes, I'm developing on an iphone 6 + and it works very well. 2D/3d content. No video. Good FPS. I'll start soon test on ipad. Started with several movies but it did not work. Everything installs in a film, works fine now. I could not test the release of 64-bit, still running in 32 so I can not say much. Flash and 3D physical seems well were scrapped. Gyroscope and enter key works fine. You can only test the keys on the device.

• IPhone 7 and 7 more dimmer/yellowish screen than the iphone 5 and 6 years

  Hello

  Everyone knows the same problem as me watching their new iphone 7/7plus?

  I noticed the two 7 resolution of the display of the model were more yellowish and weaker than previous models, even if each of them had their brightness set to the maximum value.

  Anyone has an idea why is it like that? Thank you!

  

  From left to right (iphone 7plus, 7, 6 and 5 years)

  Hello

  I thought I was the only one with this problem! I noticed exactly the same where my 6s displays blanks that are white just neutral and my iPhone 7 tends to be on the warm side. I don't know why, but this effect when the iPhone screen 7 is dimmer reminds me of AMOLED screens.

  My idea would be that the glue between the LCD and the glass needs time to completely dry, but I m not sure.

  Also, I noticed that my iPhone 6s is much smoother. In particular, the animation when you click the home button feels liquid smooth on my 6 s, then the iPhone 7 feels like the animation is cut into two pieces.

  Last thing I noticed during the last 24 hours is overheating. If she's in charge, making simple tasks, this new phone overheat very easily.

  (I apologize if there are some grammatical errors in my post, I'm French)

• iOS 10 effects e-mail: they are available on the iPhone 6 s?

  When I press the blue arrow 3D (after the text entry) I get nothing. This feature is enabled on the iPhone 6 s?

  Go to settings > general > accessibility > reduce Motion > Off. If it is enabled, the effects will not work.

• I'm unable to use special effects in the Messages on my iPhone 7.    Does anyone else have this problem?

  I did reduce the Motion is turned off.  If I try press the blue arrow, nothing happens.

  Hello, Lfsawyer!

  Thank you for reaching out by Apple Support communities. I understand from your post, that effects full screen do not work for you in iMessage after update to iOS 10, even if you have verified that reduce the Motion died. I have really enjoyed all the new iMessage effects and whether you are able to enjoy it, too - I'd be happy to help you!

  I have a little I can recommend troubleshooting measures. Before you begin, create a backup of your iPhone using iCloud or iTunes. You can get the instructions to do it here: How to back up your iPad, iPhone or iPod touch

  So, try the following in order, testing after each step. Stop when the problem is resolved.
  

  1. Restart your iPhone by following the instructions here: restart your iPad, iPhone or iPod touch
  2. Reset your iPhone settings in settings > general > reset > reset all settings. None of your personal data (contacts, photos, calendar events, reminders, etc.) will be deleted, but customizable settings (brightness screen and paper painted, alert sounds, the Date and time settings, etc.) will be returned to their default values. Also, saved networks Wi - Fi and passwords will be deleted, as well as the AFN or previously used VPN settings.
  3. Restore your iPhone settings, use the steps in this article: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure your iPhone as a new device (i.e. without your backup, at least temporarily). You can sign in iMessage FaceTime, iCloud and iTunes and the App Store with your Apple ID then test your ability to send effects.

     If you can send these effects full screen after the restore, go ahead and put your backup on the iPhone using this article: restore your iPhone, iPad or iPod touch from a backup

  Happy messaging!

• How iOS 9.3.4 does the iPhone 5?

  Hello

  I would like to know how 9.3.4 works on iPhone 5 (64 GB). It is currently still in 8.3. Good battery life, reliability and smoothness of the OS is more important to me than all the new features. I also have an iPhone 6 that I've already upgraded to 9.3.3. I noticed some stuttering during the opening and closing of the apps and that enter or exit records. As the 5s is a year older than the 6 I fear it will be much worse than the 6.

  Any advice will be greatly appreciated.

  I tried to update my iPhone to IOS 9.3.4 and immediately made 5s in the face of problems. As the update said she was ready to begin the installation it prompted for my access code that I went with but it kept rejecting me, I've tried 2 others pass codes I have used in the past, but it still didn't work. I thought nothing of him after 5 password attempts, I thought I must have forgotten an old safety pin until the screen of my phone blocked it wouldn't let me not use touch ID and asked my access code, I entered and it disabled my phone for 5 minutes I have entered my code after that always thinking I must have pressed the wrong number by chance but she rejected me again. It's as if my phone has changed my own access code after trying to update to IOS 9.3.4, I had no problems all day with my phone security so far. I do not recommend you update your iPhone 5s, I read other forums who say that the iPhone 5 s and earlier models have problems with the update and as a result unhappy, I'll probably have to restore my phone to be able to use correctly again which you do not want. Sorry for the comment but I wanted to explain my problem in its entirety, and maybe someone else can carry hope you do not have the same problems.

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.

• Application of effects to the Group of objects in a floating frame - fail.

  Hi, I do not know if someone has encountered this... I have a group of images (rating music, so black on white in fact) in a floating frame.

  I have a textured background, and I want to knock out the white in the pictures to let the background show through. Effect of obscuring should work, and on "static" images (not in a scrolling frame), it is very good. But I tried to apply the effect to the framework itself; in the Group of objects; the individual objects. All the methods of good air in InDesign, but when previewing the content viewer, I can see the effect didn't, uh, indeed. This project is directed to iOS, and I'm assuming that the content viewer gives a fairly accurate glimpse?

  And I don't want to get into the clipping paths or alpha channels, but if there is a better way to knock out white, I would be very grateful for the entry. Screenshots show (left), InDesign Content Viewer (right). Thank you very much!

  

  transferred to DPS forum.

  Blend modes are not compatible between overlays and static content. You will need to re-think this or find a way to get this content to have a transparent background. Where did this come from?

• Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.

  Why the iPhone 6plus will not open photos app on mac pro for IOS 10 update.
  A message appears on the iphone asks you to trust the computer it is attached (mac pro 10.10.5)

  You type 'Confidence' and nothing happens. the photos on mac app publishes this message.

  This Mac not yet have been granted access to the media on 'my iPhone '. To import media to this Mac, press 'Trust' on 'my iPhone '. You must first unlock the device.

  This actually solved for me after going to settings, General, reset, reset the location and privacy... and then plug in the unit and pressing the trust... hope that works for others.

• Error of GPS in the iphone 6 more after upgrading to ios 10

  After updating my iphone 6 more iOS 10, the gps signal was missing, when I try to disable and enable the iphone you location is bloked, before the update that the gps is working properly. Can correct this feature in relese next IOS? Thank you very much

  Hi Chicojander,

  I understand that you have difficulties using your GPS on your iPhone. I know it's important to be able to easily know where you are located, so I'm happy to help you.

  Looks like you've already got a good start on your troubleshooting of switching location Services. On top of that, look at the troubleshooting we offer here:

  Get help with maps - Apple Support
  

  If you do not find your current location on your iPhone, iPad or iPod touch

  1. Go to settings > privacy > location Services and to make, of course, this location Services and maps is set while it helps.
  2. Make sure that you set the date, time and timezone correctly on your device. Go to settings > general > Date & time. If possible, use the value automatically.
  3. Restart your device.
  4. Make sure that the cellular data or Wi - Fi turned on and that you have a connection active.
  5. Try another location or switch to another Wi - Fi network.

  Location-based services using GPS, Bluetooth, crowd-sourced hotspot Wi - Fi and the cell towers to determine your position. Learn more about The location Services on your iOS device.

  Thank you for using communities Support from Apple. See you soon!

• Frozen contacts after iOS 10.0.1 update on the iPhone 6 s and sometimes phone stops itself

  Hi all

  My contacts sometimes freeze (when I search a contact) and I have to force to leave contacts/phone to re - use the contacts/phone app. This has happened only once 10 update iOS. My phone also sometimes just suddenly stop (that too after the update!) It has happened twice already. The battery was more than sufficient when it happened.

  Any ideas?

  Kind regards

  Harris

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• iPhone iOS 5 + 10: press the button to unlock home takes 5 seconds to unlock the device

  Hello!

  Yesterday, I did the update to iOS 10 on my iPhone 5.

  Now, it takes 5 seconds to unlock my iPhone 5 after pressing the home button. It is average for a long time! Everyone even experiences?

  Thank you!

  martin_777

  It is normal for the old model of the iPhone 5. in any case, you can try to reset your device and check if it helps.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.