iOS 10 mail, lack of top-level

The problem:

In iOS 9, there was a list of top level of e-mail accounts. We could tap one, which would be a level in and display the tree view of the folders for the e-mail account. In iOS 10, for some reason, Apple dev seems to have deleted the first level as e-mail accounts separates. In place, they have stacked all email accounts on top of the other in one vertical line with no way to close the file trees. Anyone who uses the file trees to organize individual emails into categories and subcategories, and needs to have several emails, knows how much a nightmare this change is to navigate. It would be the same problem as if Apple has decided to remove the desktop Mac file browser bookmarks bar and then put all the files and subfolders in a long list in the viewer instead.

Question:

Does anyone know how to get this higher level of e-mail accounts save?

Can anyone recommend a good mail app that I can replace mail from Apple with if there is no solution?

Hey, Pataphysicist!

It seems that after upgrading your iPhone 5 c to 10 iOS, the Mail app is not displayed to e-mail individual records of account which can be extended. I use it often myself, so I'll be happy to help you.

When I open the Mail app, mine defaults to "All inboxes" and I type "Mailboxes" on the top left. In the next screen, I find 'All boxes' and a list of my email accounts. Just below but who is a grey area that lists the email represents once again, includes a right arrow to access this file tree. If you don't see it is troubleshooting to do. Check your mail application after each numbered step.

How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. Is better "" than "need."

1. forcing a nearby app on your iPhone, iPad or iPod touch - first of all, quit the mail application, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

2. reset the iPhone settings - on your phone, go to settings > general > reset > reset all settings. This step will return your iPhone settings by default. Don't forget to write your networks, Wi-Fi/passwords before finishing.

Be careful and please use the Apple Support communities.

Tags: iPhone

Similar Questions

  • Windows Live Mail and blocked top-level domain list

    Under spam / Security Options / International are a couple of tabs that I don't understand.

    Blocked the field list high level: since so much spam - and dangerous E-mail comes in general - overseas, it seems like an obvious ' block ' e-mail from all areas overseas.

    Blocked encoding list: yet once there are many foreign countries.

    As all my correspondents are in the United States or the Philippines, does make sense to block all foreign domains and encodings except in the Philippines?

    If not, why?

    Hello
    no need to block areas overseas. First off, with the sophistication of the software today, they could get around it if they really wanted. 2nd, not all negative messages comes from overseas. Third, you spam filter can be tweaked to handle much of the spam.
    My advice is just to pay attention to what you open... do not open attachments without first of all of their scanning.
    If you do not know the name... Keep it on the road!
    Let us know if you have any other questions
    B Eddie

  • iOS 10 Mail crashes after deleting some messages

    On my iPad after installing iOS 10 Mail closed unexpectly after deleting some messages. In addition, I regret the disappearance of the "remove all" button on some of the issues.

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • not clickable top-level items in each web site how to fix this?

    the top-level items in each web site, that I may not click measure. When I put the cursor on the items, it does not change to the hand icon. for example if I go on you tube you tube icon or the search button on the top is not click able. He works for a little while when I use firefox in safe mode, but then it stops working again, how to fix this?

    This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • No menu custom runtime not compiled application dynamically loaded top level VI

    Problem occurs in LabVIEW 2011 SP1:

    I have a main VI ("launcher VI') that generates other top-level screws by cloning when running a model them VI (* .lives). The clone laid screws have a menu custom runtime. Everything works very well, in the development as well as environment in a compiled application.

    A debuggable compiled application also works very well, either autonomous running or under the control of a debug server, when I really do debugging.

    However, when you control with thr debug server, runtime menu is only visible (but not used) in the VI controlled, while in the VI (remote) control the standard menu appears.

    What should I do to display the custom in the VI remote menu?

    -Franz

    I think that this is a known bug.

    I think remember me a recurrent issue with menus run time, lost in compiled applications. However it only the effects of the menus that you create by using the menus TIME Editor. If you generate the menu programmatically, which IMHO is better anyway, you do not have the problem.

    Mike...

  • Subgroup of experts can pass events to the top-level event loop?

    I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

    Subgroups are responsible for:

    "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

    (Sorry, I don't know how to incorporate images here, yet)

    The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

    Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

    At first it seems I could solve this problem in two ways:

    (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

    2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

    Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

    (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

    Thank you and best regards,

    J.

    I have not used the secondary method before, so I can't save what I think with real experience.

    But,

    If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

    The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

  • update of top-level indicator VI of Anou35 loop

    Everybody, Halo

    I have a Subvi with a loop in it and an indicator that changes with each iteration.

    I wish to see the Subvi indicator in the top level vi.

    Please notify

    Thank you

    Ariel

    Hello Ariel,.

    by chance that you posted in the wrong forum, this one's for LabWindows/CVI, you should post in the forum LabVIEW rather

  • Impossible to get top-level Ref Secondary VI VI

    I manipulate a control on the façade of a VI in a secondary school. The 'CvtPaneToPanelCoords' method returns a value in the coordinate system of the first level VI which has high school. I need to use the 'CvtPanelToScreenCoords' method on this value, but I can't get a reference to the top-level VI Panel. When I use the antiderivative of the call chain to find the first level VI, the last item in the list is

    My Class:Subpanel VI.ACBRProxyCaller.5AE00058
    

    Try to open a reference to this name, I get error 1004 (VI is not in memory).

    The ACBRProxyCaller is used by the node of the asynchronous call to reference, isn't it? My computer is running in some aspects of the implementation of the secondary? How can I get a reference to the VI that has secondary school in that my VI is inserted? And more precisely - because I'm actually nesting sub-panels in sub-panels - how to get a reference to the façade of the VI of above (the one that has the highest secondary level)?

    The primitive call chain only works for subVIs. A call to the CGRA isn't like the call of a Subvi, so it does not work.

    The basic answer to your question is to pass the reference in the VI yourself. If you have more complex logic, you have something like a driving force to keep the correct references.

  • Using the C-series SCTL DIO module with slower than the top level [FPGA] clock

    Hey all,.

    I'm running online research on a problem that I have a lot of success.

    I have a chassis with integrated FPGA, top-level 9030 clock 40 MHz.  I have a NOR-9401 DIO C Series module plugged and the value that will be managed by the FPGA target.  I need to count some linear encoders to exactly 10 MHz, no more, no less.  They are periods and gives a result of such kind that if I oversample or underestimate, I get garbage.

    If I create a SCTL and assign a source of synchronization derived from 10 MHz, I get an error code generation who:

    "Node read e/s for DIO3 FPGA is used in a clock domain that it does not support.  Areas of clock supported include: the clock of higher and clocks that have a rate that is a multiple of 40 MHz, for example 40 MHz, 80 MHz, 120 MHz and so on. »

    I tried several ways to work around this problem; First I tried just using a while loop with a loop set to 4 is ticking timer, but it then takes 9 clock cycles to perform the count for a reason any (although this code may compile in the SCTL without any problem).  I then tried to use the SCTL with a constant of 'true' AS a hack for a 'timed sequence' framework-related, and that certainly has not worked.

    Are there any strategies or techniques, or settings somewhere to work around this limitation on the AID I need to taste exactly 10 MHz?  I'd like to do this quickly in the software and get this rolling as soon as POSSIBLE.

    An image of the relevant section of the code is attached, I'm happy to provide you more things on request.

    Thank you very much!

    Maia Bageant

    Thanks for the reply!  The problem ended up being a hardware problem based on how coders were connected.  Now that I've fixed it, they're perfectly happy are oversampled.

    I guess my question is always legitimate to other applications, but not necessary for encoders a.

  • VMware WorkStation Pro 12.1.0 menu not visible top-level, suggestions

    I have been using Workstation of V9 without many questions about Linux x86_64 for quite awhile.

    I used v12.0.1 fine without any problem.

    Since I upgraded to 12.1.0 my menu level higher in the windowed and full-screen seem to be white text on a white background

    -The menu seems to be there but is not visible, the spacing is

    -The drop-down menus are visible when the 'high-level' menu is selected.

    Because I know that the product, I can work around you don't see is not the top-level menus, but it is a pain.

    I use Fedora x86_64 cinnamon, a spin of Gnome 3 22.

    Any ideas will be appreciated.

    Image 1 shows the current problem in v12.1.0, image 2 shows the menu v12.0.1

    I have exactly the same problem... my host OS is Fedora x86_64 cinnamon 21.

    I backed to 12.0.1 or 12.0.0 - but the problem with each of these versions is I can not move (rearrange) none of the virtual machines in the left menu.   This seems to have been fixed with the 12.1.0 release.

  • Top-level folder to achieve error

    Please help ~.

    This problem comes from the external hard drive having changed its name to have a capital letter. Now I have the drive appears twice.

    I'm trying to solve this problem in d - find the top level folder on the drive that the community suggested to other users. However, I can't yet see the top-level folder in Lightroom and Lightroom can not access to, or indeed anything import of this top-level folder. I get this error message when you try to "show the parent folder."

    Database "/ Volumes/Lacie Archive/Lightroom/Everyday/Everyday.lrcat ': failed the UNIQUE constraint: AgLibraryFolder.rootFolder, AgLibraryFolder.pathFromRoot

    Statement: UPDATE AgLibraryFolder SET rootFolder =?, pathFromRoot =? WHERE id_local =?; (error code 19)

    Imports from upper level never full file, no error message. This means that I can't end up having all the pictures in the top-level folder and so see the folder.

    The files in the subfolders are all fine and available, unwearable.

    Help is greatly appreciated.

    I think it's fixed now. Without a function "update drive location", the following video explains a work around:

    Drive hard same Lightroom appears twice - how fix - YouTube

    Please Adobe, built in features to help prevent and resolve this kind of scenario. Thank you ~.

  • Remove the top bar in the top-level navigation page

    Hello

    Is it possible to disable the top with Burger icon bar in the top-level navigation page and make it appear only served as in the articles? I thought that it was an option, but I can't seem to find anywhere in the dashboard or in tutorials.

    Thank you!

    Hi Jenn,

    There is no option to remove it when you're on a navigation page.

    Neil

  • Find the top level of a VM folder

    I want to find the name of the top-level folder that contains a virtual machine in a data center and looking for the root tree.

    For example \\datacenter\folder1\folder2\folder3\TestVM

    I try to find as a parameter of the TestVM folder1.

    I need to sort all the VM in our sphere of their top-level folder

    In all cases to do this would be appreciated.

    Also it would be quite in powercli with scripts

    Try something like this

    $vm = Get-VM -Name TestVM$object = $vm.ExtensionData$parent = Get-View $object.Parent
    
    while($parent -is [VMware.Vim.Folder] -and $parent.Name -ne "vm"){    $object = $parent    $parent = Get-View $object.Parent}$object | Select @{N="VM";E={$vm.Name}},    @{N="Top Folder";E={$object.Name}} 
    
  • How to place a menu in a top-level page which only reflects this child pages pages?

    I need to create a menu for the child of the pages are detached from one of my top-level pages. Can anyone help please.

    It is not a setting that does it automatically, but you can change the menu 'manual' and manually enter page names and links.

  • JavaScript to make the selection of top level group?

    Does anyone know how to select a group of high level by index?

    For example, I have a lot of files with deeply nested groups and I want to select all the illustrations as high-level groups and create a work plan around the visible boundaries of the group.

    I was able to loop through the groupItems from the document, but I can't seem to tell the difference between the higher level groups and subgroups. In other words, the loop works properly, but it is creating a plan to work around the Group of high level and then around each sub-group and each group within this subgroup.

    In the image as an attachment, you can see that there are 5 top-level groups in this document. However, everything else is essentially grouped within these groups. for example, the logo 'Earth' is about 100 + path grouped items. information on the collar are grouped several times in a complex hierarchy as well.

    The obvious solution is to decouple everything and then regroup every piece of shirt in 1 group. Unfortunately, that in itself is a lot more time than to manually create work plans and then the file is not very clean, if never go back inside to change/fix something.

    I guess a way to loop through the subgroups and ignore them if they are in the geometric limits of higher level? But I'm not really sure where to start on this code...

    This is the code that I currently have which creates around each groupItem, work plans, but also around each groupItem in the upper level... it up also a mistake because I think that illustrator can not cope to create work plans that fast? When I run the same script on less complicated work, it works fine.

    var docRef = app.activeDocument;
    var aB = docRef.artboards;
    var gI = docRef.groupItems;
    
    
    for (a = 0; a< gI.length; a++){
        var currentGroup = gI[a];
        currentGroup.selected = true;
        var vB = currentGroup.visibleBounds;
        aB.add(vB);//an Illustrator error occurred: 1346458189 ('MRAP')
    }   
    

    any ideas how to isolate this high-level group and ignore the rest? Thank you people.

    Screen Shot 2015-01-05 at 11.06.17 AM.jpg

    Instead of document.groupItems, try document.layers [0] .groupItems

Maybe you are looking for

  • My new CANON Imageclass MF4450 won't print or scan

    I just installed my new Imageclqass MF4450 Canion multifunction printer.   It prints or scans

  • Possible bug in Media Player

    Last Sunday, I sent the following letter to * address email is removed from privacy: * - - - - - - Hello secure, I wrote a simple program to produce. WAV files. It seems to workWell, but it has a strange problem. If the file contains a number of samp

  • STOP error after a virus and system restore failure.

    I caught a virus, accidentally deleted a user account, then do a system restore; During this process the computer stopped working. When I try to start Windows, I get this error stop-STOP: 0x0000C1f5 I tried all the possible solutions available on the

  • Gadget install no - where does go?

    I am trying to install new gadgets from Microsoft online.  I click on the gadget, I want to, click on install, then save.  It is however to save in a file for a MMO game I have installed.  Where should be installed gadgets?

  • How can I change the font size that appears in the Menus and tabs?

    I use a high-end PC to 64-bit with Windows 7 Ultimate. I changed the text font size to test the parameters of Mediumwhile and when I return to the smallest font sizes changed Menu. Look at the Menu font size!