iOS 10 with Cisco Jabber
Dear Cisco support community,
as seen on http://www.apple.com/ipad/business/work-with-apple/cisco/
Only the spark is described here. There will also be a better integration of the call with Cisco Jabber?
According to me, they're trying to transmit only apple ios 10 best interactive aura to the customer of the spark. This does not mean that jabber for iphone will be less functional in ios 10.
Tags: Cisco Support
Similar Questions
-
Cisco Jabber on iPhone lost configuration settings
After my upgrade to iOS4 for iOS5 on my iPhone the Cisco Jabber client lost configuration.
As a user, I have to configure at least the device ID and the TFTP server.
What is an iOS or problem Cisco Jabber and y at - it a fix for this problem.
Alex
Sent by Cisco Support technique iPad App
Thanks for the details. iOS 5 is compatible with Jabber for sure, but at least, I got the info for Cisco Mobile 8.1.2 customer & don't know if tests for 8.5 is over. If you are a Cisco partner, you might want to open a case with PDI www.cisco.com/go/pdihelpdesk Helpdesk so that the PDI team it can confirm for you.
In the meantime, have you tried reinstalling the client, which could solve the problem of too.
HTH
GP.
Pls rate useful messages!
-
Cisco Jabber registration fails.
Hi, I have a problem with Cisco Jabber request the Android.It fails to sign the CCM.
CCM version is 8.5, Cisco Jabber is 8.6.1, I followed the documentation
And everything looks good. DNS works, I can reach the CCM web portal on the phone's web browser.
You have some tips how to troubleshoot, for example what newspapers is RTMT would be useful, or if there are balls on Jabber.
Any help would be appreciated
I changed the CUCM hostname under system-> server-> to the IP address of the CUCM and now the Jabber client is registered and to obtain the DN. But I'm unable to make or receive calls.
Any help.
Kind regards
Abraham
-
CUCM (Cisco Jabber) - VCS - MCU (failed appeal of SIP - SIP)
Hi all
in our Videoinfrastructure, there is a little problem with cisco jabber client registry on the CUCM to our MCU.
The MCU is inscribed on the VCS.
If I make a call my Client of Jabber Cisco SIP call has failed. I call the number 4925488XXX. The callingparty is the 25203232.
In the CUCM, there is a Routepattern who translated the «Called Party Number» number = 8099 (this is the SIP Trunk for VCS).
Called Party Transformations:
Called mask = 8XXX
Take the numbers Instruction = None
Prefix =
Called number = 8099
In venture capital, there is a transformation for the 8099 dialed.
The MCU is registerd with [email protected] / * / on the VCS - it's self attandant.
In the Cisco Jabber client I never receive video or audio of the MCU AA - it looks like the call's not connect.
If I spent a glance in the VCS, I see the appeal as active and connected.
Also, I traced the call made by the VCS in debug mode.
SIPMSG:
| SIP/2.0 180 ringing
Via: SIP/2.0/TLS CUCM IP SIP; direction = z9hG4bK10ea4511f7965; has received = CUCM; penetration area = CUCMUC
Call ID: [email protected]/ * /.
CSeq: INVITE 101
Contact: <> [email protected] / * /; GR = urn: uuid:c4a744d7-5975-52db-b21c-8c519fbab06e >; isfocus
From: Stefan Walter "' <> [email protected]/ * */>;tag=252394~c75f2de1-fd7b-43c2-8bd0-6b72860c9048-46890229
To: <> [email protected] / * / IP >. tag = 11B05829C2080000
Record-Route: <> [email protected] / * / SIP; transport = tls; LR >
Record-Route: <> [email protected] / * / SIP; transport = tls; LR >
User-Agent: Codian MCU 4505 v4.3 (2.18)
Content-Length: 0
|
"2012 10-26 T 15: 33:25 + 02:00 DDUCP001 tvcs: elements UTCTime ="2012-10-26 13:33:25, 230"Module =" network.sip"Level ="INFO": Src - ip = 'CUCM IP' Src-port ="39813"detail =" receive the method Request = CANCEL, Request-URI = sip:[email protected] / * / IP, Call-ID =[email protected] / * / IP.
2012 10-26 T 15: 33:25 + 02:00 DDUCP001 tvcs: elements UTCTime = "2012-10-26 13:33:25, 230" Module ="network.sip" Level = "DEBUG": Src - ip = 'CUCM IP' Src-port "39813" = "
SIPMSG:
| CANCEL sip:[email protected]/ * /: 5061 SIP/2.0
Via: SIP/2.0/TLS CUCM IP SIP; direction = z9hG4bK10ea4511f7965; receipts = 10.202.131.96
Call ID: [email protected] / * / IP
CSeq: the 101 CANCEL
From: Stefan Walter "' <> [email protected] / * / IP>;tag=252394~c75f2de1-fd7b-43c2-8bd0-6b72860c9048-46890229
To: <> [email protected] / * / IP >
Max-Forwards: 70
Date: Friday, October 26, 2012 13:33:25 GMT
Reason: Q.850; cause = 3
Content-Length: 0
########################
Reason: Q.850; cause = 3; text = "no route to the destination.
Do you have any hint for me where I can troubleshoot further? It's a question MCU or CUCM or VCS?
Good bye
Stefan
Hi Stefan. I would probably run a Trace SDI on the CUCM as well. Seems the cancel is coming from CUCM side and end the call. To check that your possibly fall on: CSCty07061, I could run the trace of the SDI and see after reception of 180 ringing of venture capital if he tries to do a DNS query for @mcu.
The entries may look like:
| 1.3508793, 63, 100, 2 ^ 10.52.36.15 ^ *.
11:20:09.377 | / / SIP/SIPDns (2,72,1) / wait_SdlDnsSrvRecordRsp: received specified SdlDnsSrvRecordRsp is - 1. 0, 0, 0, 0.0 ^ * ^ *
11:20:09.377 | / / SIP/SIPDns (2,72,1) / copyRecordRspToRecordReq: query retry SRV as a 1 request | 0, 0, 0, 0.0 ^ * ^ *
11:20:09.377 | / / SIP/SIPDns (2,72,1) / wait_SdlDnsSrvRecordRsp: hostname (DNS A or AAAA query called a query SRV Fail) = mcu
--------------
If that's what your race, false address to solve the @mcu would be required for the call to go forward. I have this based off the coast an explanation here, but cannot actually ensure that it's what your run in. But check the trace of the SDI AFTER the 180 ringing and see.
I hope this helps.
VR
Patrick
-
Cisco Jabber with Cisco multi-party Shared more Licenses
Hello
I'm looking for a Solution to video conference for approximately 4000 employees. Currently the customer uses Cisco's Jabber for video calls from point to point. The main requirement is Ad - Hoc videoconferencing by any employee at any time. I looked at both meeting of Cisco and Cisco TelePresence Server server. The two solution requires more or licenses more pluralistic multi-party Personal shared. The customer won't buy a PMP license for each user. Their requirement is multimedia resources shared so that any employee can initiate an ad hoc conference.
Now the question is: can we use Cisco Jabber with multiparty licensing shared?
Thank you
Mockus S
Yes, it is quite possible.
The only singularity is with PMP + which applied slightly differently than the head of the Orchestra/vTS. This does not seem to match your use case since you intend to buy only SMP licenses +. From version 2.0 (1) CMS, PMP + licenses - which are less expensive than SMP + - use only if: a) the space belongs to a LDAP user with a PMP + license for which they are responsible; or (b) If a user LDAP with PMP + assigned to them joins the Cisco meeting App space as an authenticated user. In all other scenarios, including ad-hoc escalation with CUCM licensed SMP + is consumed. This is different from that of head of the Orchestra/vTS, which were also able to understand the right to the user for ad-hoc calls.
-
Any bug IOS (ADSL + IPSEC) with Cisco 1721?
Hello
I tried to install an IOS image with support ADSL and IPSEC on a Cisco 1721.
When the router works fine with ADSL, it does not work with IPSEC and vice versa.
I tried to change the router with a similar 1721, but nothing has changed.
I tried the following images (I found them with IOS Scheduler) for IPsec:
C1700-o3sy756i - mz.121 - 3.XP3.bin
C1700-o3sy756i - mz.121 - 5.YB5.bin
When I install the versions of IOS, I can't see the ATM interface.
Have you noticed any IOS bug related to ADSL + IPSEC with the Cisco 1721 versions?
Thank you
Paolo
Hi Paolo
It comes to the interface card WIC ADSL is not supported in versions of software you tried.
According to "Software Advisor", the card WIC-1ADSL is supported on the platform of 1721 in the following versions:
12.2 (13) T, 12.2 (4) AGO, 12.2 (4) 12.2 (4) YH, YJ 12.2 (8), YL 12.2 (8), YM 12.2 (8), YB, YN 12.2 (8)
So, you will need to get a new image, a crypto of the cause.
/ Michael
-
Hello
I VCSC and TMS in the network, there are of the endpoints configured with SIP and H323. VCSC are not in the field.
Now we have to enter Cisco Jabber with the VCSC. What are prerequisites them?
First it requires license for Cisco Jabber on VCSC?
We need to join the VCSC domain?
Our VCSC is version 6.1 and TMS is 13.
TNX
Bobby
Yes, you will still be able to authenticate users JabberVideo locally, 'right', you won't be able to use NTLM.
Also take a look at the TMS Provisioning Deployment Guide:
/Jens
-
Good afternoon; I have the Cisco Jabber Software running on an Iphone 6 Plus, everything works well when the phone is unlock, when the phone is locked can not answer the calls received by the Cisco Jabber only a window appears with a message that I have a call, but I can't answer. Is there a way to solve this problem. ????
Greetings.
Fernando
Since this request is not an Apple application, I suggest make you contact with the developer of application or their support and ask your question.
-
Certificado Cisco Jabber mobile eror
Buen dia a todos,
I have a problema con iniciar cesion al con Cisco Jabber v. 10.6.2 mobile devices en as al momento querer iniciar cesion indica el siguiente error:
«Se ha rechazado UN certificado no valido.» Póngase in contacto con su administrator. »
Hasta ahora el error appears tanto en como en andriod iphone, are themselves from the e instalo instalo el Jabber in any appears message algun momento pero para aceptar el certificado, the tests were breakfast desde red interna, CUCM version Escalin 8.6.
I hope can help me saludos.
Buenos dias Adrian,
Hay you dumb bug description
CSCuu29303 Jabber iOS 10.6.2 drop invalid certificate
-
Cisco Jabber for Windows - Added new friend
Hello
When I try to add a buddy to our internal directory, it does not work. For a short time the new boyfriend is in the buddies and then rinse... never again. In the presence of CUP Viewer, you don't see also no boyfriend.
When open UPC 8.5.x then, it works perfectly. If the two (Jabber and UPC) has started, add new buddy in! Jabber! and in the UPC he is there. Jabber is not not do anything this boyfriend.
If now! The new boyfriend UPC or Jabber logs by himself... it would have shown in the buddies of the Jabber Client at all times. But the other guy must be connected by itself.
(1) file-> new-> contact
(2) looking for someone
(3) define the Group
(4) add
External friends... added to the list works and they stay there.
Here the break error report.
thx for all the help phil
One of your user names contain a space by chance? Because I see a similar behavior and I followed it down to user names (and therefore IM addresses) that contain spaces fundamentally break totally Cisco Jabber, but CUPC 8.5.5 works very well with them.
-
What is the difference between the video of Cisco Jabber of jabber, WebEx, Cisco
Hello
I started reading about Cisco jabber for a few days. I couldn't make out the clear disctiction between Cisco Jabber, WebEx and Cisco Jabber video. What is the difference? Also the one who uses the API of the other? What is APIs that WebEx Cisco Jabber or Jabber user video using the WebEx API?
Thanks in advance :)
Does this help: http://www.cisco.com/web/products/voice/jabber.html
Jabber is a BRAND name for a range of products to run on a variety of devices. Mainly desktop and mobile.
It requires not more CUCI.
WebEx Connect (with CUCI Connect) is/has migrated to Jabber
CUPC is/has migrated for jabber
The Jabber SDK is very powerful (url above understands this as well)
Jabber for telepresence is the old MOVI (Mobile Video) of the Acquisition of Tandberg and more than one piece of theater for VCS registration and control. But most of the jabber brand above 4 video.
There will be subtle differences between different brand of jabber clients, so don't read a J4Windows guide and think it's the same for the iPad or Android for example).
But its great. Head to head with Lync.
-
Cisco Jabber 10.5 for Windows boot process
Hi guys,.
I had following problem and impossible to find a clue that can move me somewhere.
A customer has a jabber Cisco 10.5 deployed and integrated with Active Directory.
Every day, customers are initializing requests of sends customers jabber with phone numbers against the AD domain controller (these figures are not the contactlists - personal or company) and as there is that much more of this question in a moment the utillization of the announcement is almost 100%, which also makes the problem with the connection in outlook (is also integrated with the Cisco Jabber for windows)
I searched the Web for tips but have not found anything.
My questions are:
The data for Outlook Personal AddressBook starting the Jabber questioned via Jabber Localy or domain controller?
What is the process of starting the Jabber for Windows on the integration of directories?
Is this a normal behavior of jabber?
#####################################################################
Here is the configuration of the config.xml file - jabber (passswords and areas are changed):
BDI
AD
AD-IP address Field of presence
389
DC = presence, DC = domain
Username
Password
Fake
True ###########################################################
Hello
Jabber will not interview contact Outlook address book DC until a manual search is made.
Also default contact jabber, the domain controller for the windows PC host.
Each time that you enter at least 3 characters (default for search), jabber first find cached contacts, then outlook address book and then search the directory.
The attached config file is BDI type ie. for MAC computers, it will not take effect in windows PC.
-
ISA500 site by site ipsec VPN with Cisco IGR
Hello
I tried a VPN site by site work with Openswan and Cisco 2821 router configuration an Ipsec tunnel to site by site with Cisco 2821 and ISA550.
But without success.
my config for openswan, just FYI, maybe not importand for this problem
installation of config
protostack = netkey
nat_traversal = yes
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%4:!$RIGHT_SUBNET
nhelpers = 0
Conn rz1
IKEv2 = no
type = tunnel
left = % all
leftsubnet=192.168.5.0/24
right =.
rightsourceip = 192.168.1.2
rightsubnet=192.168.1.0/24
Keylife 28800 = s
ikelifetime 28800 = s
keyingtries = 3
AUTH = esp
ESP = aes128-sha1
KeyExchange = ike
authby secret =
start = auto
IKE = aes128-sha1; modp1536
dpdaction = redΘmarrer
dpddelay = 30
dpdtimeout = 60
PFS = No.
aggrmode = no
Config Cisco 2821 for dynamic dialin:
crypto ISAKMP policy 1
BA aes
sha hash
preshared authentication
Group 5
lifetime 28800
!
card crypto CMAP_1 1-isakmp dynamic ipsec DYNMAP_1
!
access-list 102 permit ip 192.168.1.0 0.0.0.255 192.168.5.0 0.0.0.255
!
Crypto ipsec transform-set ESP-AES-SHA1 esp - aes esp-sha-hmac
crypto dynamic-map DYNMAP_1 1
game of transformation-ESP-AES-SHA1
match address 102
!
ISAKMP crypto key
address 0.0.0.0 0.0.0.0 ISAKMP crypto keepalive 30 periodicals
!
life crypto ipsec security association seconds 28800
!
interface GigabitEthernet0/0.4002
card crypto CMAP_1
!
I tried ISA550 a config with the same constelations, but without suggesting.
Anyone has the same problem?
And had anyone has a tip for me, or has someone expirense with a site-by-site with ISA550 and Cisco 2821 ipsec tunnel?
I can successfully establish a tunnel between openswan linux server and the isa550.
Patrick,
as you can see on newspapers, the software behind ISA is also OpenSWAN
I have a facility with a 892 SRI running which should be the same as your 29erxx.
Use your IOS Config dynmap, penny, you are on the average nomad. If you don't have any RW customer you shoul go on IOS "No.-xauth" after the isakmp encryption key.
Here is my setup, with roardwarrior AND 2, site 2 site.
session of crypto consignment
logging crypto ezvpn
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
lifetime 28800
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
lifetime 28800
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 4
BA 3des
md5 hash
preshared authentication
Group 2
!
crypto ISAKMP policy 5
BA 3des
preshared authentication
Group 2
life 7200
ISAKMP crypto address XXXX XXXXX No.-xauth key
XXXX XXXX No.-xauth address isakmp encryption key
!
ISAKMP crypto client configuration group by default
key XXXX
DNS XXXX
default pool
ACL easyvpn_client_routes
PFS
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac FEAT
!
dynamic-map crypto VPN 20
game of transformation-FEAT
market arriere-route
!
!
card crypto client VPN authentication list by default
card crypto VPN isakmp authorization list by default
crypto map VPN client configuration address respond
10 VPN ipsec-isakmp crypto map
Description of VPN - 1
defined peer XXX
game of transformation-FEAT
match the address internal_networks_ipsec
11 VPN ipsec-isakmp crypto map
VPN-2 description
defined peer XXX
game of transformation-FEAT
PFS group2 Set
match the address internal_networks_ipsec2
card crypto 20-isakmp dynamic VPN ipsec VPN
!
!
Michael
Please note all useful posts
-
IOS router with several groups of VPN
Similar to a discussion, I read with a PIX firewall, I need to set up multiple VPN groups on IOS-based router to support different levels of security. For example, a VPN "GUESTS" group would only have access to 1 server, while the VPN "ADMIN" group would have access to the entire network.
With a PIX firewall, you can simply specify additional group names (for example "group1 vpngroup',"vpngroup group2"and so on). However, I have not been able to find how do with IOS-based router (Cisco 831 12.3 (4) T) running.
For example, I have these dynamic groups of VPN:
the crypto isakmp client configuration group of GUESTS
password1 keys
DNS 10.1.1.1
swimming POOL1-IP pool
Configuration group customer crypto isakmp ADMIN
key password2
DNS 10.1.1.1
POOL2-IP pool
! - Users get authenticated to a RADIUS server
list of card crypto CRYPTOMAP customer VPN-USER authentication
! - The problem is that line taken out. "I can only specify an allow list (a group name) for this encryption card!)
card crypto CRYPTOMAP ADMIN isakmp authorization list
I did research on this site, Google, usenet and ORC and have not found what I'm looking for. Any ideas?
Thank you.
Command 'isakmp authorization list' you do it reference does not refer to the VPN group, it refers to a whitelist of AAA name which States that the groups are configured locally. Change to the following:
AAA authorization groupauthor LAN
card crypto isakmp authorization list groupauthor CRYPTOMAP
The "groupauthor" is just a label that matches the encryption to the aaa command. Your clients VPN will be accompanied to a specific group depends on what group name, they set up in their VPN client.
See http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080095106.shtml for details, it's a HW 3002 client to a router but the router config is exactly the same thing.
-
Cisco Jabber for Windows user Photos
8.6.3 CUPS
Client Jabber for Windows Version 9.0.1 Build 8802
I noticed that Jabber Client for Windows Cisco does not automatically refresh with updated photos in Active Directory.
I had updated the user photo in AD and noticed that he wouldn't. I travelled to "C:\Users\
\App Data\Local\Cisco\Unified Communications\Jabber\CSF\Photos" and had to manually delete the users photos in this folder. I left on the Jabber Client and restarted the program. When I did this, crashed the Jabber Client, I saved the report of crash and re-opened the Jabber client. This time the customer opened correctly, and the photos update appeared now! It seems that Cisco would not set the photos to be cached on the local computer.
Any thoughts?
Hey Ellen,.
Looks like the similar problem with CUPC. Previously, I had a discussion with our Dev team for CUPC Photos of caching locally.
This has been identified in the following improvements:
CSCtu25084 CUPC Contact photo put in cache and do not update dynamically
I will update to add Cisco Jabber for Windows as well.
Best regards
JAS
Maybe you are looking for
-
Why call it can´t I do video in MSN with sternschenita?
Why can´t I do video call s m n with sternschenita.
-
HP TouchSmart300-1100: HP TouchSmart300-1100 - 204 or 240 pin DIMM?
HP TouchSmart300-1100 - 204 or 240 pin DIMM? Re: 2 GB (1 x 2 GB) DDR3 PC3-10600 Thank you
-
192.168.1.1 comes empty
When I go to 192.168.1.1 it started empty comin. I tried in firefox and chrome on 2 different computers using windows 7 and 8. The router is a standard package and WRTG54 parameters. I can ONLY use wireless. I can't access it physically because it's
-
Error trying to use custom BB card not found CommandHandler
I get the error that the net.rim.device.api.Command.CommandHandler is not found when I try to add any type of code to my application to open a personalized card. I searched the api, this Board and all samples and still can't seem to find a way to mak
-
Replaced by shortcuts shared network folders
I have music stored as files FLAC on a RipNAS server that is running Windows Home Server with Power Pack 3 2009. It worked without problem for three years. So far, that is. From Windows Explorer in Windows 7, all folders on my RipNAS have suddenly