iOS 9.2 Touch ID has stopped working

I have an iPhone 6 Plus and recently upgraded to IOS 9.2.   Unfortunately, the contact ID no longer works.    I added a fingerprint, but using the new footprint does not work either.    It was also very difficult to form the new imprint. Now in applications such as Amazon and Apple pay don't work at all using the fingerprint. I tried to reset and nothing changed. Any ideas?

Restore your device to factory settings. Please note that this will delete the data on your device.

Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

If these steps do not work, contact Apple and ask for help.

https://www.Apple.com/support/iPhone/contact/

Tags: iPhone

Similar Questions

  • Pro L10: After using a wireless mouse, the touch pad has stopped working

    Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

    I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

    Can you help me?

    Hello

    It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
    I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
    I guess that you are having regular problems with a USB mouse.

  • iPhone 6s more touch ID has stopped working

    ID touch has stopped working, I'm in iOS 9.1.

    Is there a fix for this problem?

    Hi rulmer,

    If you are not able to use Touch ID on your iPhone, the steps below can help restore this functionality to the device.

    • If you have just restarted your device
    • If your fingerprint is not recognized five times in a row
    • If you have not unlocked your device to more than 48 hours
    • If you have just registered or deleted fingerprints
    • If you try to open Touch ID & access code in the settings menu
    • If necessary password is defined on immediately under settings > General > Restrictions

    If you still need help, follow these steps. Try again after each step:

    1. Make sure you have the latest version of iOS.
    2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
    3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not press hard, tap too quickly or move your finger.
    4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
    5. Tap Settings > Touch ID & access code. Make sure that the Unlock iPhone or iTunes and App Store is lit, and that you have entered one or more fingerprints.
    6. Try to register another finger.
    7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

    1 moisture, sweat, lotions, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect the recognition of fingerprints, including exercise, shower, swimming, cooking, or other conditions or changes that affect your fingerprints.

    Use the ID button on iPhone and iPad
    https://support.Apple.com/en-us/HT201371

    Kind regards!

  • Satellite Z830-10U - Touch Pad has stopped working

    I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

    Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

    All help gratefully received...

    Hello

    What happens if you disconnect the USB mouse?
    You can use the touchpad again?

    From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

    For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

    You can find it here:
    Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

    One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
    It is worth to check also

  • My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

    Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

    I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

    Thank you

    I have another type of TouchSmart, but this may work for you:

    1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
    2. Select Device Manager from the list.
    3. Click on the small arrow next to Interface devices to expand the list.
    4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
    5. Right click and select Activate from the list.
    6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

    On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

    If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
    In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

  • Screen touch S410p has stopped working

    Touch screen of my laptop feature stopped working just in time. When I turned off my laptop, tere this update of windows which lasted more or less an hour. After that, the touch screen has just stopped working. Note that there is no installation program before uninstall antivirus - all programs and files in the laptop is as it was when I bought it.

    Running Windows 8 unilingual laptop

    We'll see. I didn't know what exactly I did, but the touch screen feature is stable now - more no stop service after a certain time. I upgraded to 8.1 and windows updates installed. Who must have done the trick. in any case, I thank very you much for helping me with this problem.

  • HP 15 laptop: touch screen has stopped working

    I have a HP TouchSmart laptop computer model 15-f010wm, product number J8A22UA #ABA, 8.1 with Bing 64-bit Windows.

    The first day of the 3-4, I used this computer it worked like a charm. I loved. Now a few times touchscreen will work for about 5 min and then stops or does not work. When it stops working, I get a pop up in the lower right corner that says: the last USB device not recognized USB device you connected to this computer has malfunctioned, and the window does not recognize. (I have not plugged anything in this computer but except the power cord)  When this happens and you go to Device Manager sometimes, there will be a yellow! triangle under the Human Interface Devices drop down and some times yellow! triangle will be under Universal Serial Bus controllers list down. And if you go to they system screen line Pen and touch passes to no. Pen or press enter is available for this view.

    I tried to do a system restore. Also, I did a test fast system and a comprehensive system. The results have been the primary battery check ok and all the others said past. And of course I can't make the screen test because the touch screen does not work.

    Please help me with this. My computer was a gift, my other is really old and was ready for an upgrade. I've never had problem with HP before.

    Hi @Jen81 ,

    Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

    Thank you.

  • touch screen has stopped working Samsung ativ 500 t, perhaps after upgrade to pro

    I have Samsung ativ pc 500 t. IT has been bundled with Windows 8 and worked perfectly. Last Thursday I have upgraded to Windows 8 Pro and a few hours later, on Friday he lost touch ability partially. Can I use the stylus (pen s), but I can't use the fingers. I have attached the device info on trh device I think should be linked to the touch screen with your fingers.

    Any help would be much appreciated. Thank you, David

    List of devices
    Created using DevManView

    Device Name Manufacturer Service Code of Type of device Name of Type of the device Device ID of Instance Location Capacity of Config flags Disabled Connected Peripheral register 1 time Device register time 2 The drive letter Driver description Driver version .inf File .inf Section Driver Date Record of pilot time
    HID-compliant device (Standard system devices)   HIDClass   HID\ATML1000 & Col01\4 & 2101be6d & 0 & 0000   0x000000e0 0x00000000 NO. NO. 13 12. 2012 0:33:49 13 12. 2012 0:33:49   HID-compliant device 6.2.9200.16461 Input.inf HID_Raw_Inst.NT 21 6. 2006 26 1. 2013 11:34:33

    Hello

    I use Samsung ATIV XE700T and win 8.
    Happens to me too after I uninstalled the current Wacom driver (7.1.0 - 8-Win8) then install (7.0.9 - 5 - Win 7).
    Then why I have installed Win 7 driver if I win 8 as an operating system?
    Well, my pen was not working on Adobe Flash Professional (worked nowhere else). So after that I installed the Win 7 driver it started working on perfect Flash too.
    I don't know if you've already discovered but if you plug a usb device, finger touch works for awhile, then again stops working. And the same thing happens when you plug the device you plugged in.
    As I am an Illustrator with the stylus on the Flash for drawing is a priority for me so I did re-install the driver for Win8 again.
    Solution:

    1. go to "Control Panel-> programs" and uninstall the driver current (ISD Tablet).
    2. restart your computer.
    3. download and install this driver.
    4 restart your computer.

    You're done!
    Kind regards
    Kemal KAYA
  • Satellite M40X-189 - Touch Pad has stopped working

    The touchpad has frozen. I rebooted the computer and the touchpad worked. This happened several times, and then by restarting does not clear the problem. I checked in the device several times Manager and sometimes the mouse was listed and sometimes it wasn't! I restored the computer to an earlier time when the touchpad was working but it does not solve it. An Agent from Toshiba offers the soft ware was corrupted and I need to save every thing and use the recovery disk to reload the software for the tablet. I'm not ready to do it again. Currently an ALPS pointing device and a compatible mouse HID are listed in Device Manager, and both are erroneously reported as working. Any other ideas on how to fix the touch pad?

    Hello

    In my opinion, you should try to use an external mouse to see if it works again and again. Believe me on this path it is not easy to say why this happens.

    There may be a hardware problem, but it must be tested. If you preinstall the unit with recovery CD unit will be clean and on this path, it is not possible to say that some additional software has any influence on that.

  • Touch screen has stopped working - HP Pavilion 23 all-in-one

    Touch screen no longer responds to any contact afer 9 months use.    Details of the said system - touch compatible HID "this device works correctly.

    Hi JohnSevenoaks,

    Welcome to the HP Forums!

    I read your post on how your touchscreen no longer work, and I would be happy to guide you to a resolution! To start, I have to ask you a few questions:

    • What is product and model number from your desktop?
    • What version of Windows you have installed on your computer?
    • Have you installed a new software or hardware on your computer recently?
    • Has your computer has completed its important Windows updates?

    In the meantime, please follow this document on the HP TouchSmart PC - troubleshooting problems of touchscreen Windows 7 or for Windows 8. This should help to determine if the problem is software or hardware related.

    Please re-post with the results of your troubleshooting, as well as the requested information. I look forward to your reply!

    See you soon!

  • Satellite L510-S432 - Touch Pad has stopped working

    Hi all.

    I bought this laptop last 2 weeks, it works well at first.

    It was once I rebooted the system to reduce some startup programs through msconfig, the touchpad doesn't work. Before the restart, there is a tool bar showing on top there whenever door - press the 'Fn' and now he gone too.
    However, the function "Fn" still work, where I still can control the brightness, the numeric keypad, and etc. through the fair. Fn Fn + F9 key that usually turn on/off the touchpad does not work.

    I had reinstalled the synaptic driver, but still, it did not work. I had activated back all system startup that I had to close, it still does not.
    I try to restore the system, but failed.

    Need help, thanks first to all who help.

    Hello!

    To me it sounds like that, the touchpad is simply disabled with FN + F9 and you will need to activate it.

    I assume that you are using Windows Vista, then you need to reinstall the Toshiba value added Package. You can find it on the Toshiba site. This package is required for the FN keys and other special functions.
    But before installing the new version, you need to remove the old version first.

    An interesting thing: you wrote this system restore failed. What exactly do you have and do you have an error message?

    Good bye

  • My wife has a Mini IPAD and the touch screen has stopped working. If anyone has had similar problems and if so is there a cure?

    HHas someone at - he had problems with the IPAD MIni touchscreen unresponsive? If so, can we do anything to fix the prob?

    Try these standard troubleshooting steps in the following order:

    Reset: Press the home and power buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

    Catering: Connect your device to iTunes on your computer, backup, and then select factory restore.

    See here for more details on the restoration: https://support.apple.com/en-us/HT201252

    If none of these work your device could have developed a hardware problem. Contact Apple technical support: http://www.apple.com/contact/

  • Touch laptop has stopped working!

    Yesterday, 31/07/14, my mother was uploading images on my laptop HP Pavilion TouchSmart 15. When she finished, I wanted to watch a video on YouTube so I'm on the computer, but on the lockscreen, I couldn't drag and so I had to click and when I got to my place of password, he didn't touch keyboard that appears usually there. And now I can't read some of my games and I have lost some capacity that this laptop great brings me. Can someone tell me what I did? My mother said the only button what it does press f5 at the top of the keyborad. What is the problem?

    Hello Great_Glob,

    As you have gone through the entire document above without success, I have recommended to perform a backup and restore of the operating system on your system. To do this, please follow this document on the backup of files (Windows 8) , and more to perform a recovery of the HP (Windows 8) system. This should help to restore your system to its original configuration by the manufacturer.

    If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

    I hope this helps!

    Concerning

  • Touchpad has stopped working in my Satallite L850

    Hello

    My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

    Kind regards
    DAV

    > Touchpad has stopped working in my Satallite L850
    How to understand this?
    You can toggle touchpad by using the FN + F9 key combination?
    The touchpad driver is installed correctly?
    Touchpad is listed in Device Manager?

  • Scrolling touch pad has stopped.

    Scrolling touch pad has stopped working when you slide your finger upwards & downwards the edge on the right side, what could be wrong?

    Hello

    Control Panel - mouse - look for the TouchPad settings - mine is on the device settings tab
    and yours may be different (it is NOT the Scrollings tab which is for the mouse). On some
    You can enable and disable the scroll and/or the size of the area and the sensitivity of the value
    the touchpad.

    Some will have a TouchPad progam/control icon in the Notification area near the clock-
    at the bottom right.

    Check with the manufacturer of system support, documentation in line, or forums as there probably
    are shortcut keys that enable and disable the touchpad functions.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
    The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
    (drivers), now right CLICK on the touchpad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
    RESET

    This will refresh the driver for the TouchPad and battery USB.

    Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
    device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for