iOS 9.3.4 causing my 6s more rebooting randomly, is anyway to fix this?

Similar Questions

• That's why when I try to save a large file, it gives me a message that it can not save because that its more 2 GB? How to fix this?

  That's why when I try to save a large file, it gives me a message that it can not save because that its more 2 GB? How to fix this?

  PS will be only savePSD files up to 2 GB. You need to save in the form of a BODY.

• After you have created a folder that it does not apper when refreshing and save files, it takes much more time for it.how to fix this?

  When I create a new folder, unable to see her. Once I updated it seems. where to save a file to a software (ms word or all), the waiting ring appear more time and save it.

  Windows 7 ultimate service pack 1
  Corei7 3.4
  8 GB ram

  Hello

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.

• Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

  I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

  Hello kellyfromrexford,

  I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

  On the use of the battery on your iPhone, iPad and iPod touch

  Maximize the life of the battery and battery life

  Take care.

• 9.3.4's 6 iOS iPhone Wifi turns off when the phone is locked. How to solve this?

  Hey! I have a 6 - iOS 9.3.4 - 16 GB iPhone. My phone WiFi turns off eventually when I lock it... The problem is that I get no notification because of this problem. I'm too lazy to try troubleshooting for this problem, just read a lot of advice, but it had a bad feedback. How would I fix this? Thank you.

  It is not a problem. This is a design feature which is present in all iPhones and all versions of iOS for 9 years. WiFi turns off 30 seconds after the phone goes to sleep to save battery life. If you want to keep it you must connect the phone to the power.

• Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  I think it's about the size, just differently than before. See the discussion in:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=691157

• iPad Pro is heavy and cause the hand pain, neck and shoulders. Everyone knows this?  If for advice?

  iPad Pro is heavy and cause the hand pain, neck and shoulders. Everyone knows this?  If for advice?

  Do not take while using it?

• bluescreen lvl4 disp causes driver to go in a loop, how to fix?

  Screen turns blue and says error disp lvl4

  causes driver to go in a constant loop

  error codes

  0x000000EA

  0x85ED45FQ

  0x864C0990

  0xF7CA0CBC

  0x00000001

  Contact the administrator to repair

  OK, how to fix this?

  If you are unable to Windows, try to go to Mode without fail (quickly press F8 just before the Windows splash screen appears.

  Please provide the following information:

  -Zip please the contents of the directory C:\Windows\Minidump

  -Transfer to the public area of a SkyDrive (https://skydrive.live.com) account

  -Post a link here so we can download it.

  and

  -Go to start and type "msinfo32" and press enter

  -When the utility opens, save a copy of it as an .nfo file and another copy in a txt file.

  -Zip them upward and download them to the Public to a SkyDrive (https://skydrive.live.com) account field

  -Post a link here so we can download it.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Use SkyDrive to upload collected files:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Instructions courtesy of http://www.carrona.org/
  And http://sysnative.com
  So much useful information here.

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• Windows updates... verification of updates can operate for 30 minutes to 1 hour or more... How to fix?

  Operating system: Windows 7 Professional

  Updates Windows runs for an excessive time.

  How can it be fixed so that it takes less than 5 to 10 minutes instead of 1 hour?

  SFC/scannow shows no breach of integrity.

  Had clicked on the updates windows with CPU 23% and 30% of physical memory.  Updates Windows is still ongoing and spent 45 minutes.

  How you work up extensive delays in windows updates?  And how to fix this?

  If Windows 7 have problems to find updates, causing heavy CPU or RAM with the Svchost.exe process, use the reason that Windows Update could not automatically update the Windows Update Client.

  in this case, you must download the update manually, it's the latest version at the moment: https://support.microsoft.com/en-us/kb/3138612

• My Windows 7 operating system has just decided he wasn't more "authentic." I thought I fixed it, but he came back. I have to do a system repair/restore/etc?

  My Windows 7 operating system has just decided he wasn't more "authentic." I thought I fixed it, but he came back. I have to do a system repair/restore/etc?  Should I still worry about this or the police will come knocking at my door?

  Looks like you used a disc at retail to install with the OEM SLP key. An OEM SLP key works with your media recovery of manufacturers. (an OEM SLP key can be activated by normal means).

  the simple solution is to change your product key to the one on your COA.
  EDIT: Oops. must have been click Start, type slui 3, press on enter

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• The system has rebooted without judgment properly first. This error can be caused if the system is unresponsive, is crashed or lost power unexpectedl

  Im having problems with my new rig. All of a sudden it stops working when I just run windows, it can takes minutes to BSOD or seconds.

  I checked the event viewer and that's what I have.

  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: Sprutmunn
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      3
      1
      63
      0
      0 x 8000000000000002
     
      1370
     
     
      System
      Sprutmunn
     
   
   
      10
      0 x 0
      0x2
      0 x 1
      0xfffff802e1ccb722
      0
      0
      0
   
  

  IM, including the dmp so file--> https://www.dropbox.com/s/9srgscrrwm96jeq/060814-6578-01.dmp

  I hope some of you guys can help me, ill be happy for all the advice you can provide.

  Thank you

  TJ

  This phenomenon was related to iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp.  It is a buggy especially with SSDS driver or hybrid.  I'd install the most recent driver available, even if it is the same date that drivers become corrupt.

  If you have a SSD drive or hybrid don't forget to update the firmware and you really need to update to win 8.1, you will stop to get the updates bit of time if you do not have.

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\060814-6578-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff802 'a 5088, 000 PsLoadedModuleList = 0xfffff802' 50b56aa0
  The debugging session: 17:49:48.785 Sunday, June 8, 2014 (UTC - 04:00)
  System Uptime: 0 days 0:01:33.409
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ............................
  Loading user symbols
  Loading unloaded module list
  .........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {0, 2, 1, fffff80250944722}

  WARNING: Unable to verify timestamp for iaStorA.sys
  ERROR: Module load completed but symbols can be loaded for iaStorA.sys
  Probably caused by: iaStorA.sys (iaStorA + 6710a)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 0000000000000000, referenced memory
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80250944722, address memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80250be2168
  GetUlongFromAddress: cannot read fffff80250be21f8
  Paged 0000000000000000

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! KeAcquireInStackQueuedSpinLock + 32
  fffff802'50944722 488711 xchg rdx, qword ptr [rcx]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: AV

  Nom_processus: System

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  DPC_STACK_BASE: FFFFF80251BE3FB0

  TRAP_FRAME: fffff80251bdd730-(.trap 0xfffff80251bdd730)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000002 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffff80251bdd930 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff80250944722 rsp = fffff80251bdd8c8 rbp = fffff80251bddab0
  R8 = fffff80251bdd930 r9 = fffff880019a3800 r10 = fffff80251bdd870
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  NT! KeAcquireInStackQueuedSpinLock + 0x32:
  fffff802'50944722 488711 xchg rdx, qword ptr [rcx] ds:00000000'00000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff802508e3769 to fffff802508e4440

  STACK_TEXT:
  fffff802 '51bdd5e8 fffff802' 508e3769: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
  ' fffff802 '51bdd5f0 fffff802' 508e1fe0: 00000000 ' 00000001 fffff802 ' 51bdd930 ffff38d7 '6a9e1d00 fffff802' 51bdd730: nt! KiBugCheckDispatch + 0 x 69
  fffff802'51bdd730 fffff802'50944722: fffff880 '0176610a 00000000 00000000' fffffa80' 0d4cdb90 00000000'00000002: nt! KiPageFault + 0 x 260
  ' fffff802 '51bdd8c8 fffff880' 0176610a: 00000000 ' 00000000 fffffa80 ' 0d4cdb90 00000000'00000002 00000000'00000000: nt! KeAcquireInStackQueuedSpinLock + 0x32
  fffff802'51bdd8d0 00000000' 00000000: fffffa80'0d4cdb90 00000000'00000002 00000000'00000000 fffffa80 0'c 770500: iaStorA + 0x6710a

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  iaStorA + 6710 has
  fffff880'0176610 has?              ???

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: iaStorA + 6710 has

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: iaStorA

  Nom_image: iaStorA.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51fb0de8

  FAILURE_BUCKET_ID: AV_iaStorA + 6710 has

  BUCKET_ID: AV_iaStorA + 6710 has

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_iastora + 6710 has

  FAILURE_ID_HASH: {f733faf2-d2a8-1b11-9fa3-afbe5930de67}

  Follow-up: MachineOwner
  ---------

• Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  If your Adobe program worked before installed El Capitan and does not work after you have installed El Capitan... How is problem from Adobe?

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

  -See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

• J K L shuttle keys causing Premiere Pro to crash and stop. Someone having this same problem?

  J K L shuttle keys causing Premiere Pro to crash and stop. Someone having this same problem?

  Hi Abraham,.

  Sorry for this question.

  Changing the audio channel seems to be the cause of my problems. I have change audio channels on the video for my project it to appear on my preview window use J K L to Polish thru and it hangs and stop.

  This looks like a problem that we know. You can avoid collisions by turning off 2 Audio Preferences:

  • Maintain the pitch audio when the shuttle
  • Outputs multi-channel sum to Mono in the Source monitor

  See if your situation improves after the deactivation of these preferences.

  Thank you
  Kevin