iOS 9.3 - phone now sounds half the time
Since I have downloaded iOS 9.3 that half of my incoming calls go directly to voicemail. I never had this problem before you download the recent update. Any thoughts? Thank you!
as far as I know the amount of the rings is a carrier not setting a phone setting
Tags: iPhone
Similar Questions
-
About half the time an incoming call makes my phone ring; half of the time (unpredictably), it just goes straight to voicemail. How can I fix?
Check: Settings - do not disturb = Off?
-
HP a6720f BIOS not finding not led half the time!
Yesterday, I noticed a problem with my Pavilion of MP (with Windows 7 Home Edition): first of all, the machine has slowed to a crawl. Each click of the mouse seemed to take 2 minutes (with the small cursor going in a circle). I finally gave up and rebooted. The BIOS could not find readers, burner HD or DVD! After several attempts, the BIOS found the HD, but instead of its name, it was gibberish (and he could not find the OS). Many others and all of a sudden he found both and booted up Windows. Everything worked normally for a while, except that the DVD could not read any disks. I even rebooted several times with success. But then he began to do the same thing again and this time he won't spend more than a few minutes before the mouse clicks take an eternity and then, suddenly, he flashes a blue screen to me (for just a fraction of a second) and goes to this first start screen, which allows you to press F10 to the Setup utility.
I unplugged the DVD player, in the case that was the problem, but it can not find the HD half the time. If I use the configuration of the BIOS or PC diagnosis, everything works normally. I've never had an accident it! (But PC Doctor usually can't find the HD).
I tried to connect the HD to another SATA port. No luck. I ordered a new DVD player, to see if I can start from that, but it has yet to come.
I'm so frustrated! Thank God I didn't throw my old gateway. I use it now, and I can see why I replaced it.
I wouldn't invest in a new HD if there was a MB problem. And by the way, how HP Bill for a new motherboard, anyway?
Sign me up 'puzzled in Alabama.
Well, people, the motherboard has arrived from China, and so far, the computer works fine! (It was 2 days. It never lasts until before long after his bad start.) I put some Arctic Silver on the northbridge chip because the old stuff was dried up. Be careful, there are drivers near the chip and Arctic Silver conducts electricity! The motherboard (from Digital Anny on EBay) is used, but the version of the BIOS is newer than what I had. It seems to be in very good shape. I hope that-, it crashes I won't waste more money on this computer. I realize now that I could buy a new MB (another type) for half what I paid for it.
-
926 printer all in one, half the time that it crashes scan only
I have a dell XP 530 and using a printer AIO 926. Great work expect half the time it crashes when I want to scan something. It gets to 98 or 99% then stops. I have to finish the program, then shut down the computer and restart to try again. It scans very well to a fax. I went to the control panel and clicked on scanners and cameras, and then clicked on Wizard scanners and can analyze every time using the scanner Wizard.
Scanning problem is only when you use Dell all in one Center to try to sweep.
Scanning works very well when the works using Fax and large printer...
Event viewer reads as follows: Hanging application dlcxaiox.ece, blocked module hungapp, version0.0.0.0, version4.22.0.8, block address 0 x 00000000.
When I click on link ms the below error:
Product: Windows OS
ID: 1002
Source: Application Hang
Version 5.2
Symbolic name: ER_HANG_LOG
Message: Hanging application %1, version 2%, hang module version %4 %3, hang address 0 x %5
end
wb8slqgak,
Please always allow the printer beyond the firewall. Have you tried the information that I have suggested in the THREAD above?
Rick
-
alarm alarm sound at the time of the event on the calendar
How can I disable the sound produced by my Centro every time an event on my calendar - it's boring when it rings in a theatre at curtain time
Hello and thank you for using the Palm Help Forums!
On your device in the Applications 'All' page, go to Prefs and then sounds and alerts.
You will see at the top of the page "Applications:"with a scroll to the right of the box. " Click on the box and select Calendar. You can disable the volume by clicking on the scroll next to 'Volume' box and select disabled or configured to lower. You can also change the sound of the alarm in the scroll box to the right of "alarm sound".
I hope this helps and let me know if you have any other questions.
Message is about: Treo 800w (Sprint)
-
DV7-7300 new not autoconnect half the time
Brand new. Windows 8 x 64 2740qm intel
If I do a "reboot" the without wire won't autoconnect 90% of the time and I also have to connect manually.
If I do a normal closed and start it connect to 95% of the time.
Another machine is an old DV6 and it auto-connects every time no problem for 2 years.
I've updated the drivers and BIOS on the HP site.
I upgraded the firmare for the router.
I disabled the LAN but no difference
Don't know what to do.
Thank you
I changed the original router setting "up to 150MBS' default 'up to 54 MBS' who has always worked with everything and all of a sudden I'm back to WPA2 again and it connects every time.
I went back to 54, and he has had failures. Up to 150 back and it connects.
I'll be darn.
-
my phone has sound but the screen is blank
I made a phone call. I can hear people talk but may the screen is blank and I cannot complete the call. What should I do?
You can hang up with the sleep/wake button. Then try to force the phone reboot now buy the button sleep/wake and home for 10-15 seconds. -AJ
-
Improvement of ios 9.3.2 now requires using the unlock code
I have to use my code to unlock my iPad after the closing and reopening of the coverage. I did have to do it before the upgrade. I change all of the settings. My wife's IPad does not only. We each have 3 generation models.
You can disable the password under settings > password, but it is not recommended for security reasons.
-
Very annoyed by this "folder" does not seem the point of site error when publishing my sites. Here are the sites I "published" several times with the same login credentials. Now Muse gives me this error with my sites. Anyone know how why it's happening now and how to fix it?
Muse should be able to create an FTP connection and an HTTP connection to your site in order to validate your sitemap.xml, confirm the support of PHP and confirm redirects htaccess are for synchronized text. If the 'URL of the Site' value is incorrect, Muse will be unable to find the site transferred via FTP to the site URL provided using HTTP.
-
NIC interrupts the connection half the time on start up
is it possible to fix this problem im getting tired of it, it happens from time to time when I started the PC
It's on my hp pavilion 500 pc model 500-164
is it the ethernet or wifi? You can check the settings of your 'power' or 'power saving mode '. I had a similar problem and the deactivation of the energy saving features fixed it.
-
Installed AVG to help, delete all games, ran disk cleanup, have XP.
Hello
Good to know that the problem has been resolved. Let us know if face you any problems with Windows in the future.
-
Phone keeps restarting after the last update
After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
HELP ME GUYS!Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data
Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformattingIf you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP
-
Aurora R4 BIOS ROM Checksum failure but boots 50% of the time?
About half the time to try to start it normally does so and the other half it does not, start but all the lights and fans turn but nothing appears on my monitor and it gives 1 beep every seconds for BIOS ROM checksum failure (Possible MB). It started after the installation of Windows 10.
Any help? and why would it only to start half the time?
I solved the problem!
Thanks to Tesla1856 and this post with links to Tesla by Cass-Ole messages. I flashed the bios A11 of A08 by creating a USB bootable and update of the dos environment. She completed successfully and now I can now boot Windows every time and have either messages with beeps.
So far, it seems that the Windows activation message has been linked to this issue, and the issue of 'previous overclocking failed ".
The only thing I can think that caused it was installing Windows 10 he apparently stores the key "deeper" in the motherboards bios, but I don't know
-
Satellite U400 - it all the time on Windows 7
My laptop worked pretty well with Vista and XP it did not sound too, but since I installed Windows7 it her all the time.
And this is the worst that I know because I like it when it is quiet and no sound, but Windows 7 installed 2 days ago and it's all the time. Almost everything I do and yes I installed all the updates by the drivers of Toshiba.
Please can someone give some suggestions?
Thank you.
Hello
Can you also tell us what mean with her sound all the time?
I put t really know what you mean.Maybe you mean the Windows sounds. You can disable it in the control panel.
Check this box! -
No trace of the battery - only part of the time with SplashScreen
Hi all
I have some intriguing problem. I am loading an app will a splashscreen and about half the time I don't get a stack trace of error. The splashscreen is pressed while I get the data and images on a remote server, and then analyzing the data. This is the code that I get a no stack trace:
_app.invokeLater( new Runnable() { public void run() { // This represents the next step after loading. This just shows // a dialog, but you could push the applications main menu screen. try { getUiEngine().pushScreen(new DirectoryScreen(sqlmanager)); _app.getActiveScreen().getScreenBelow().close(); } catch (Exception e) { // TODO Auto-generated catch block System.out.println("in the runnable exception: " + e.getMessage()); e.printStackTrace(); } } });
As a general rule, the error message is something like "the runnable exception: Index - 3 > = 4".
Help!
Check the code in DirectoryScreen. Use a step by step debugging...
Maybe you are looking for
-
Age of Empire II cannot install on Vista?
I am trying to install it on my computer, which is a Vista, and while it loads, a popup tells me that is not working. I can not quite copy because my game is in French, but he says it's a file write error (?). He has written too location: C:\Program
-
My office seems locked. I can't click on anything.
My office is locked. All the icons are not letting me click on them. I can click on the bottom of the task bar. Also I can't right click on the desktop at the top of the page either.
-
cursor jumps on a regular basis when I type.
cursor jumps from time to time as I type.
-
Fainted because of color cartridge
I have a HP Deskjet 4260. Yesterday, my son bought new color and black ink cartridges. Since it replaced the cartridges, the color cartridge has not been working properly. The printing color is VERY faded. The black seems to work fine. I have reviewe
-
Try to download windows 10 it tells me to remove the digital persona but I can't
try to download windows 10 it tells me to remove the digital persona but I can't