iOS 9.3 unable to connect to the internet is unable to reset the phone

Similar Questions

• iOS iphone 10 does not connect to the DHCP wifi

  Updated IPhone 6 to 10 of IOS, and now the phone will not connect to my BT Home Hub 5.  All other devices will still be another phone that has 10 IOS.

  The phone recognizes the router password, puts a blue check mark against the connection, but no wifi signal appears and remains on 3G / 4G.

  If I look at the DHCP information on the phone, it's all white is wrong.

  I checked on the router and the phone does not display as connected.

  I have reset the router etc.

  I reset the network connections on the phone, more hard recharge etc.

  I am at a loss, please help!

  Can you connect to other Wi - Fi networks outside your House?

  If not, to exclude a software problem, set back to settings factory, without using the last backup. Set up the coordinates manually, and then test the Wi - Fi connectivity.

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Bluetooth does not connect to the phone Moto G

  Bluetooth not connect to the phone of MotoGP

  How can I get there?

  Original title: bluetooth does not connect

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to connect to the Bluetooth.

  I will definitely help you with this.

  1. Do you receive an error message when connecting?
  2. Are you computer connection to phone with Bluetooth or other device?

  I suggest you go through the below methods:

  Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.

  Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.

  Method 2: activate Bluetooth Support Service.

  Follow these steps and check if the Bluetooth support Service is started.

  (a) press the Windows key + R, type services.msc and press ENTER.

  (b) make a right click on the service named Bluetooth Support Service.

  (c) check if it is started, otherwise click Start.

  Download and install the latest Bluetooth drivers on the manufacturer's Web site.

  Method 3: To add a Bluetooth device, see the following steps:

  Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:

  1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device

  2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.

  Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.

  See also the link below:

  https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• How to prioritize the connection of the PHONE in CAR Bluetooth system / device on SmartBand talk SWR30

  After reviewing on this device for over a month I asked my wife to gift me for Christmas. For 3 days I really liked, but then a critical flaw is apparent

  Having not driven for several days because of the holidays, I'm leaving in my car, only to realize that I wasn't getting phone calls, text Messages and other notifications on my car bluetooth system integrated (Ford Sync of Sony / Microsoft), only on the talk Smartband. Doing some research, it became clear that if my SWR30 was already connected with my Xperia (Z2) my Ford Sync could not connect!

  I realize the limitations of Bluetooth technology (for example, you can not simultaneous connections using the same Bluetooth profile) and the workaround is to manually turn off the Audio from the phone (hands-free) for SWR30 in Z2 Bluetooth profile. Don't forget to turn off off / return turns out to be irritating and too much effort. I thought I might be able to create a (macro) event in app of Smart Connect from Sony to do this automatically, but this can be done that the app is rather limited!

  It is more important for my car system works with my Z2 that I use frequently and is quite a safer and more average legal to answering calls etc.

  A no matter what you have no idea or suggestion? I love this SmartBand (its a lot smoother and lighter than the real smartwatches) and I really want the talk function, but if I can't solve the problem of car bluetooth (and this will affect probably all other car systems Bluetooth / devices) easily and smoothly, with regret, the SWR30 will go back to the seller

  As already said, I really like the SmartBand and was very disappointed to learn that he could not coexist with a Bluetooth car system! Having had a few days between Christmas and new year I was determined to solve this "loophole" and I'm happy to announce that I have and somehow smooth!

  Suggestion widget-driven "ensaro", unfortunately, I didn't a rocker who was to be executed manually, it should be automatic. So I carefully studied the Google game shop, try a large number and ended up with 2 applications that were real contenders: Trigger (by Egomotion) and Automagic (by Gridvision).

  Both apps will basically allow you to create a trigger (for example the Bluetooth car radio wants to connect to the phone) followed by an action (for example disconnect connection phone Bluetooth to SmartBand, followed by switch on Bluetooth car audio connection). Trigger calls this task automation a trigger, Automagic calls that a Flow.Trigger is fairly intuitive, visually, but unfortunately support for this supposedly highly rated app seems to no longer exist! It became very frustrating for me because sometimes it would not run (However, it allows also a widget manually run the task manually)... so I dug for the heavier weight Automagic!

  AUTOMAGIC uses a dynamic flowchart, where you add a trigger, optional condition (true / false) and finally one or more actions. The style reminded me of my days of programming many years ago and logical nature excited me. The possibilities are huge and can scare some users looking for a quick result, but it's really very easy to use, especially when you have some of the somewhat "obscure" terms used (after all this, a German programmer of labour and some suggestions of translation may be required).

  At the end of the day, I created 2 stream, connect to car via (SmartBand disconnect) system and then connection towards my car and the other to reconnect to the SmartBand not drive (the trigger being the car Bluetooth is is disconnected / unplugged). These flows is passive and apparently uses very little battery energy, execution when a trigger condition is matched, and so far, works well.

  If someone wants to see how my stream are built, I'll be happy to email them. You open them directly in Automagic (go to their website allows you to download a 9 day trial version with up to 3 workflow)... my stream are embellished by additional measures, like turn off WiFi and play a sound when a connection took place... and most important of all there is a forum with a lot of help and examples and I was really happy when the progaming author , Martin, in fact, responded to a query...

  Problem sorted...! AUTOMAGIC worth £ 2.40 ...

• Extension mobility / CAD issue: "You cannot connect because the phone is compatible IPV6"... help please.

  Hi all

  I'm having a problem with the mobility of the extension and CAD.

  UCCX 8.0.2.10000 - 41

  8.0.2.40000 - 1 CUCM

  CAD 8.0 (2)

  Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)

  When the user logs in the phone itself, there is no question at this point.

  When the user goes to sign in CAD, they are presented with the following error:

  "You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »

  Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.

  Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.

  The user can then successfully connect to the CSA.

  The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.

  I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.

  A test, I've changed that to "IPV4" only

  User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!

  Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.

  I also found that by setting up a 'line' on the device - the problem is also solved.

  HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.

  Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?

  See you soon,.

  Brett

  Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).

  Hi Brett,

  I saw something similar once I installed UCCX 8.x to a customer.

  Workaround there had to be a SU installed on the UCCX.

  If it helps,

  Kind regards

  Juan

• Selecting bluetooth watch never leaves sd in walking mode, but look is connected to the phone 6

  Watch isn't providing directions of speech when using map App.  Just text with the vibration appears.

  When you select bluetooth on the watch, he never leaves the research, but the watch is connected to the iPhone 6.

  < published by host >

  JM Bell wrote:

  Watch isn't providing directions of speech when using map App.  Just text with the vibration appears.

  Hello

  Apple Watch does not spoken directions. He uses instead of taps to advise you when to turn.

  More information:

  https://help.Apple.com/watch/#/apdea7480950

  JM Bell wrote:

  When you select bluetooth on the watch, he never leaves the research, but the watch is connected to the iPhone 6.

  This is the correct behavior.

  To check if your watch is connected to your iPhone via Bluetooth, do not go to the home screen > settings > Bluetooth on your watch. This is how to tell the watch to find and pair with other Bluetooth (e.g. headphones) devices. It is normal for the iPhone not matched to being listed there and for the display of report "research."

  Instead, go to the glance of parameters:

  • When you view the time on your watch dial, slide up from the bottom edge of the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected:
    • Connected and a symbol of green phone in the upper right shows that the watch is connected to your iPhone via Bluetooth.
    • Connected and a green cloud symbol indicates that your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • Disconnected shows that your watch is disconnected from your iPhone and is not connected to a Wi - Fi network. The symbol in the upper right corner will be a red telephone with a line through it. The same symbol will also see the top of the watch face.
  • Slide down again to return to the watch face.

• Apple TV / Hue lights have no internet connection (but the phones and computers do) - only disconnect Time Capsule fixed guess?

  Hello

  My Apple TV will sporadically lose access to my iTunes library (despite showing the connection and a signal strong) and Netflix will not play.  My tint lights are not recognized when this happens.  When I restart the AppleTV, then it shows that they are not connected to the internet.  However, my computer and the phone still have functioning wifi in these proceedings.

  The only thing that seems to restore connectivity is when I unplug my Time Capsule (version 7.7.7) and then plug it back in.  Can anyone offer solutions and the potential causes?

  Thanks in advance for your time and help, it is greatly appreciated.

  I don't have a simple answer to why not a quick fix to fix things.

  There are plenty of things you can try. None are guaranteed to fix things... but he is able to increase your blood pressure and make that upset you.

  Then. I need more information.

  What ISP modem or router do you use? Brand and model please.

  Who is the provider?

  How did the TC connected to it? What mode it's in, bridge or router?

  Is the wireless on the ISP router turned on?

  You have an excessive number of routers wireless around you?

  Use diagnostics wireless on a computer to check.

  You never reset the TC at the plant after the update of the firmware?

  If this isn't the case, please do so now. Redo the installation in accordance with the following instructions.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with Yosemite.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless. (try to keep names < 10 characters)

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels like this helps.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important... the IPs derived in all directions when Yosemite do not remember his name for 5 min after a reboot done for poor network management.

  I highly recommend this method on bridge of situation where you have the ISP router.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  4. Please tell us if your ISP is now using IPv6 as who introduced a new set of questions.

• WiFi doesn't connect while the phone is in standby

  Everyone knows the mobile data taking priority over wifi in some compact Z5 scenarios?

  To reproduce:

  1. Phone is fully charged.  None of the energy savings options are enabled.  Dungeon of wifi on during sleep is enabled.
  2. Phone is somewhere far away from wifi to use with mobile data.
  3. Phone becomes in the scope of a known any wifi device in not in use.
  4. After a period of time, the phone is used.
  5. Mobile data are still in use and wifi turned on only at the point of the screen truns.

  This happens at home and my office.

  Issue edited by Rickard

  In the last update, 32.2.A.0.224, we have enabled analysis for WiFi so that your phone is (re) branch after being out of reach even when it is dormant in the background. It could take up to 5 minutes or so before it connects when to sleep well.

  If your WiFi is still not working properly after this update, if possible, try your phone with an another router/access point to make sure that this is not caused by the router/access point.

• BlackBerry Smartphones no noise when it is connected to the phone calls

  Hi all, had my first BB (a curve) Monday.  Twice now that I composed a call, he connected and I can't hear can their phone ring or hear the voice at the other end, and we hear my voice.  (I know it's connected, because one of the calls was to my son when he was next to me)!  Whenever I went in contacts to make the connection... once it worked the second time, there was still no sound.  This morning I got a call and it's the same thing.  It's almost as if the phone is cut in two ways.  I double checked my settings and Yes, the volume has increased and the mute was off. I talked to other users that I work with and none had this problem.  Have I not a simple wrong value or the BB has a few questions?

  Thank you

  I have Verizon as well.  I decided that if she continues to do I will resume.  I don't want to have to remove the battery for a question like this one often!

• My girls share the same account iCloud with part of the family. Since the latest iOS update whenever they are connected to the Internet, a phone call to one of their phones translates both phones receiving the call even if they have different number

  WWhat can other thrm use iCloud different accounts?

  All I can suggest is to use different from the Apple ID and then enable sharing of the family.

• BlackBerry Smartphones My Desktop Manager does not connect to the phone

  the manager crashes just on the connection. I tried to restart and reinstall the app and nothing helps.

  Can someone help me please?

  Help us help you... Please provide details. What Mac? OPERATING SYSTEM? What BB?

• I can't answer a call with my watch. I can make a call but not answer one. The green button reacts but the watch does not connect with the phone.

  Watch cannot answer incoming calls.

  Hello

  To answer a call on Apple Watch, press answer. If you would rather press the button firmly, it won't answer the call.

• Cannot connect to the network after updating to iOS 9.3 Beta

  I downloaded and installed the public beta version of iOS 9.3 on my iPhone 6 today. After that, I am unable to connect to the network. I tried to reset the network connection of the phone and have my cell phone operator reset the network connection. None worked. Anyone else have this same problem?

  I was able to solve the problem by turning on "Airplane Mode" for 5 seconds, then shut off again. Everything seems to work fine now.

• Problems in connection to the mobile network after upgrading to iOS 9.2.1

  Upgrade to iOS 9.2.1 Thursday last on my iPhone 5. Mobile connectivity random but frequent problems faced since then - just lose network connectivity and the phone displays "No. Service" for long periods. Are gone to lift (Airtel, India) and according to them they also received 100 + complaints of users after they upgraded to iOS 9.2.1

  Amit,

  I am also facing the same issue... its really frustrating... in my case is not at all happened to the network... do not know if everyone from apple to do anything

• BlackBerry smartphones it says "unable to connect to the requested server" whenever I try

  He continues by saying "unable to connect to the requested server" every time I try t open any website, wi fi is perfectly connected to the phone there is no problem with the wifi, it was working until yesterday, but today I am faced with this prblem, please let me know the solution as soon as possible.

  Hi and welcome to the Forums!

  Can you please clarify? You say that you cannot connect to the server, and then you say that WiFi is perfect. Can say you it was OK until yesterday. So I'm confused about what you are who do... is it via WiFi or via your carrier connection data?

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• Palm Centro (Sprint) - unable to connect to the Internet or to the center of update

  I keep getting failed to connect when trying to access the Internet... He worked a few weeks ago, but now will not work all of a sudden...

  My Palm Blazer is version 4.5.8

  Don't know why its all of a sudden does not...

  Need help please!

  Nevermind, I found the problem... My centro has been updated and I never pulled out the battery after the update...

  Once I took out the battery and the phone, I was able to connect to the phone... Everything is good now...

  Please close topic... Thank you!

  Message relates to: Centro (Sprint)