iOS 9.3 VPN On Demand ignores RequiredDNSServers
We have an application which works well on iOS 9.2, it uses the "RequiredDNSServers" of VPN service on demand. But when you take 9.3 (9.3 all versions, including 9.3.2 beta 4), VPN on demand just ignore "RequiredDNSServers".
"RequiredDNSServers" is an array of IP addresses that are used to resolve the specified areas. When DNS servers are unavailable, a VPN connection is established in response. However, the VPN connection should never start.
Submit a bug to apple iOS SDK team and got the answer that ' there is nothing can help Developer Technical Support, you need to connect General supported VPN that is supported by AppleCare. As I use the same mobile configuration on iOS 9.2 and 9.3 iOS but get totally opposite results. So I think there must be something wrong with iOS 9.3. Could someone help?
And I'm not the only person who has experienced this problem. Another thread here: https://forums.developer.apple.com/thread/42624
Here's a snippet of our mobile configuration.
Expected result:
When loading from google.com, it must first check for result DNS 8.8.8.8.
Actual result:
It will not ask for result DNS 8.8.8.8 and immediately start VPN connection.
- < key > OnDemandEnabled < / key >
- < integer > 1 < / integer >
- < key > OnDemandRules < / key >
- < table >
- < dict >
- < key > Action < / key >
- < string > EvaluateConnection < / string >
- < key > InterfaceTypeMatch < / key >
- < string > Wifi < / string >
- < key > ActionParameters < / key >
- < table >
- < dict >
- Areas of < key > < / key >
- < table >
- < string > < /string > www.google.com
- < / array >
- < key > RequiredDNSServers < / key >
- < table >
- < string > 8.8.8.8 < / string >
- < / array >
- < key > DomainAction < / key >
- < string > ConnectIfNeeded < / string >
- < / dict >
- < / array >
- < / dict >
- < / array >
Please do not post the same question multiple times. It can be confusing and unnecessarily tedious for everyone. When anyone can reply to your message, they will.
See you soon,.
GB
Tags: iPhone
Similar Questions
-
Dear all,
I have ASA 5510 and Version 8. I want to know IOS for SSL VPN, but I don't know which...
Please help me show...
HQ-ASA5510 # HS, fla
path-# - length - time -.
177 14137344 January 1, 2003 00:06:12 asa804 - k8.bin
75 4096 November 21, 2008 12:17:46 log
79 4096 crypto_archive November 21, 2008 12:18
178 7562988 November 21, 2008 12:19:30 Amps - 613.bin
180 4863904 November 21, 2008 12:21:10 securedesktop_asa_3_3_0_129.pkg.zip
181 4096 November 21, 2008 12:21:10 sdesktop
188 1462 November 21, 2008 12:21:10 sdesktop/data.xml
182 2153936 November 21, 2008 12:21:10 anyconnect-victory - 2.2.0133 - k9.pkg
183 3446540 November 21, 2008 12:21:12 anyconnect-macosx-powerpc - 2.2.0133 - k9.pkg
184 3412549 November 21, 2008 12:21:16 anyconnect-macosx-i386 - 2.2.0133 - k9.pkg
185 3756345 November 21, 2008 12:21:16 anyconnect-linux - 2.2.0133 - k9.pkg
For Version 7. he say the ssl VPN.
Please help me which line as SSL VPN.
Best regards
Rechard
Richard, you already have the code that supports SSL webvpn on your ASA.
See page medium low SSL VPN VPN/Web for more detailed examples, which provides all the necessary information for any additional/optional
plug-ins needed.
http://www.Cisco.com/en/us/products/ps6120/prod_configuration_examples_list.html
Details of the sample SSL VPN configuration and types... but all the SSL.
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00806ea271.shtml
What you have in your directory ASA applies the Anyconnect client who is also driven SSL but is a bit different from plain SSL webvpn, I suggest you go to the configuration examples of link that can provide information on the implementation of SSL vpn varios.
Concerning
-
IOS XR MPLS VPN L3 + BGP error message
I use the file "iosxrv-k9-demo - 5.1.2" image on GNS3 for free practice.
When my IOS XR with MPLS L3 VPN router and assigning an interface of IOS XR to a VRF, it gives an error:
RP/0/0 / CPU0:Feb 19 20:16:50.182: bgp [1048]: ROUTING-BGP-3-RPC_SET_ERROR %: [22]: read all RPC operation: Table. Error: ' Subsystem (3373) "detected the status of 'fatal', 'Code (37)': pkg/bin/PMO: (PID = 663826):-traceback = b395988 b229e9c 8226a4b 8224bdc afb2e7c b22d857 8267050.
looking for a solution.
Hi umesh, there is a table operation handler problem that has been fixed in xr 513. When the list is empty, it returns "error", but which is not necessary to return the error, an empty list can be ok, so the sw fix that went in is to check that and return errors more detailed codes inside the s in this case table operations and PMO communition XR (which is made via RPC or remote call procedure).
few options who may be here to try:
-1 ignore it and continue the configuration
-2 set all definitions of vrf first under router bgp and everywhere where necessary before you assign it to an interface
-3 clear config, reboot, apply the new configuration step by step with the first definitions of vrf and last to apply to the interface.
-4 Download xr513 XRv.
see you soon
Xander
-
NAT via LAN-to-LAN configuration between router IOS and Cisco VPN 3000
Hello
I have the following document on the creation of a virtual LAN2LAN including NAT private network.
It? s easily do this with the hub. Now, I have to set it up on the IOS router, and for this purpose, I can? t find any information. NAT, I have my private network to a single IP address that must be by tunnel as my local network official.
Anyone have documentation on this szenario? I can? t is not on the OCC.
Thanks for the support
Hello.
Concentrators are very friendly units (IMHO) to VPN with NAT and VPN.
You build an acl defined traffic over the vpn (110) based on the nat wouldn't
You create an acl to set what is NAT had (111) and create a NAT statement accordingly
Here is an example configuration.
!
crypto ISAKMP policy 10
BA 3des
md5 hash
preshared authentication
Group 2
vpnsrock crypto isakmp key! address x.x.x.x
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
10 VPN ipsec-isakmp crypto map
defined peer x.x.x.x
game of transformation-ESP-3DES-SHA
match address 110
!
interface Fa0
NAT outside IP
VPN crypto card
!
!
interface fa1
IP nat inside
!
IP nat inside source list 111 interface fa0 overload
IP route 0.0.0.0 0.0.0.0 y.y.y.y
access-list 110 permit ip fa0 - ip network-remote control-generic generic-mask
access-list 111 allow local-network ip network-remote control-generic generic-mask
!
-
How you configure a ca to ios server to authenticate users of vpn SSL during the use not a domain name?
My public IP address is (for example) 1.1.1.1. I'm not going to use this with a domain name. How my CA server / trustpoint be configured to prevent users to get errors certificate after the certificate has been installed?
I have the ssl vpn to the top and work, I can even connect using AnyConnect2.3, but not 2.5. I know a work around for this is to modify the hosts file, but y at - it another way to circumvent it through configure the CA server or trustpoint? Thanks for the help.
Triton.
Hey Newt,
To avoid warning against an inconsistency of name, make sure that the CN of the certificate contains the IP address of the gateway SSLVPN.
for example
cry ca trustpoint bla
object CN = 1.1.1.1
then (re-) register the trustpoint to get a new certificate with the correct object. If users have installed CA cert, then they don't need to change anything. If they have the installed server certificate, they will have to install a new one.
HTH
Herbert
-
Any unusual activity on iOS when using VPN device
So I started using VPN recently on my pc and iOS devices. Whenever I connect it crashes and I have to go through the approval process to get my Microsoft emails to work via iPhone. Anyway to work around this problem, without cutting completely from security to the email service?
Krysalis Hello,
This question you have posted here is more complex that responded in this forum.
To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the best support.
https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
Cisco IOS - access remote VPN - route unwanted problem
Hello
I recently ran into a problematic scenario: I am trying to connect to a remote LAN (using a Cisco VPN client on my windows xp machine) my office LAN and access a server there. The problem is that I need a remote local network access at the same time.
Remote LAN: 172.16.0.0/16
LAN office: 172.16.45.0/24
Topology:
(ME: 172.16.10.138/25) - (several subnets form 172.16.0.0/16) - (Internet cloud) - (VPN-Gateway) - (172.16.45.0/24) - (TARGET: 172.16.45.100)
To provide access, I configured a VPN to access simple distance on a 1700 series router. It's the relevant part:
(...)
crypto ISAKMP client config group group-remote access
my-key group
VPN-address-pool
ACL 100
IP local pool pool of addresses-vpn - 172.16.55.1 172.16.55.30
access-list 100 permit ip 172.16.45.100 host 172.16.55.0 0.0.0.31
(...)
The configuration works fine, I can access the 172.16.45.100 server every time I need to. However, the problem is that when the VPN connection is connected, Windows wants to somehow rout the packets intended for 172.16.0.0/16 through the VPN tunnel. This is apparently due to a static route that added by the Cisco VPN Client and all other specific VPN routes.
I suspect that the culprit is the IP LOCAL POOL, since when the VPN is connected, debugging of Client VPN log shows something like "adapter connected, address 172.16.55.1/16. Focus on the part "/ 16". I checked the VPN status page and the only road indicated there was "172.16.45.100 255.255.255.255" under remote routes. Local routes was empty.
Is this a known problem I missed the obvious solution for? Is there no workaround apart from the pool local vpn penetrating high-end 10.x.x.x or 192.168.x.x? Thank you in advance for advice or tips!
Hello
The best way is to avoid any overlap between the local network and VPN pool.
Try 172.17.0.0/16, is also private IP address space:
http://en.Wikipedia.org/wiki/Private_network
Please rate if this helped.
Kind regards
Daniel
-
IOS - help with VPN IPsec L2L with NAT
Hello guys
I tried to get VPN to work for a specific scenario where I do NAT for VPN traffic to avoid the duplication of subnet.
I found several guides on cisco.com, but all the ones I found does not (or how) overload NAT (for internet traffic), I need for my setup.
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800b07ed.shtml
http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a0080a0ece4.shtml
Basically, I need to know how the configuration looks like when make you static NAT in a VPN tunnel as well as provide internet connectivity using NAT in the same router?
I have attached a drawing that needs to better explain my needs.
Someone knows a guide that shows how to do this?
Best regards
Jesper
You can use a static policy NAT NAT the traffic:
access-list 101 permit ip 10.0.0.0 0.0.0.255 10.30.10.0 0.0.0.0.255
access-list 102 deny ip 10.0.0.0 0.0.0.255 10.30.10.0 0.0.0.0.255
access-list 102 permit ip 10.0.0.0 0.0.0.255 any
policy-NAT allowed 10 route map
corresponds to the IP 101
internet-NAT allowed 10 route map
corresponds to the IP 102
IP nat inside source static network 10.0.0.0 road policy-NAT 10.30.10.0/24-feuille
IP nat inside source map route internet-NAT interface overloading
Hope that helps.
-
6500 IOS router Cisco VPN Client using DHCP no Pool of IP
Hey guys,.
I have a little trouble trying to get my vpn client to use a dhcp server rather than the pool of intellectual property. When I use the command IP pool everything works fine, but when I use the dhcp command I get an error on the client-side saying that no address private IP was affected by the peer.
Here is my config.
connection of AAA VPNCLIENT_AUTHEN group local RADIUS authentication
local VPNCLIENT_AUTHOR AAA authorization network
Configuration group customer isakmp crypto VPNCLIENT_GROUP
xxxxxxxxxxxxxxxxxxxxxxxxxx key
DNS 172.25.128.43 172.25.65.43
win 172.25.1.54
sktnhr.ca field
172.25.0.27 DHCP server
GIADDR DHCP 172.25.205.1
DHCP timeout 10
pool # VPNCLIENT_IPPOOL
Crypto isakmp ISAKMP_PROFILE profile
VRF HUB_VRF
match of group identity VPNCLIENT_GROUP
list of authentication of client VPNCLIENT_AUTHEN
VPNCLIENT_AUTHOR of ISAKMP authorization list.
client configuration address respond
crypto dynamic-map DYN_MAP 1020
game of transformation-ESP-AES-256-SHA
ISAKMP_PROFILE Set isakmp-profile
market arriere-route
card crypto HUB_CRYPTO_MAP 6005-isakmp dynamic ipsec DYN_MAP
local IP VPNCLIENT_IPPOOL 172.25.205.25 pool 172.25.205.250
I can see the dhcp request and offer on my dhcp server but nothing is for the customer. When I use a pool I ping the dhcp server, which makes me think the roads are okay. Anyone has any ideas.
You need the giaddr in an EasyVPN server configuration. Try adding looping to your switch and test it again. If you use an iVRF, make sure that the closure is in the VRF and the interface to the server.
-
Releases of vulnerability with OSPF-IOS to 2691 VPN LAN to LAN
help everyone knows about it? Please give
Hello
This is the last notice on OSPF...
http://www.Cisco.com/en/us/products/products_security_advisory09186a008029e189.shtml
regds
-
VPN at the request of iOS to the NSA 220
Can I connect an iPhone or an iPad to a SonicWall NSA 220 with SSL VPN on demand and detection of trusted network?
Read the Notes version and Guides on the link below, I think I won't be able to do so in part because the NSA 220 does not support the authentication of the client certificate, and these features are only supported on devices Dell SonicWALL E-Class SRA.
support.Software.Dell.com/.../Release-Notes-guides
I would like to know if it will work before you buy the 220 of the NSA. Or to add this support for client certificate authentication, SSL VPN on demand and detection of Web of trust in a future release?
Thank you
Hi Barret.
Currently, the NSA does not support the authentication of the client certificate and which is required for the VPN feature at the request of iOS. Currently iOS VPN on demand is supported for connections to the devices Dell SonicWALL E-Class SRA and SMB SRA. There are more details and captures screen in the Mobile Connect for iOS 3.1 User Guide: https://support.software.dell.com/download/downloads?id=5642876
It will be finally supported by the line of product of NSA as well but I have no available for this chronology.
-
IOS VPN on 7200 12.3.1 and access-list problem
I'm in IOS 12.3 (1) a 7200 and have configured it for VPN access. I use the Cisco VPN client. Wonder if someone has encountered the following problem, and if there is a fix.
The external interface has the access-list standard applied that blocks incoming traffic. One of the rules is to block the IPs private, not routable, such as the 10.0.0.0 concern, for example.
When I set my VPN connection, none of my packets get routed and I noticed that outside access list interface blocks the traffic. When I connect to the router through VPN, the router attributes to the client an IP address from a pool of the VPN as 10.1.1.0/24. But normal outside the access list denies this traffic as it should. But as soon as I have established a VPN connect, it seems that my encrypted VPN traffic must ignore the external interface access list.
If I change my external access list to allow traffic from source address 10.1.1.0/24 my VPN traffic goes through correctly, but this goes against the application to have an outdoor access list that denies such traffic and have a VPN.
Anyone else seen this problem or can recommend a software patch or version of IOS which works correctly?
Thank you
R
That's how IOS has always worked, no way around it.
The reasoning is to do with the internal routing on the router. Basically an encrypted packet inherits from the interface and initially past control of ACL as an encrypted packet. Then expelled the crypto engine and decrypted, so we now have this sitting pouch in the cryptographic engine part of the router. What do we with her now, keeping in mind users may want political route she is also, might want to exercise, qos, etc. etc. For this reason, the package is basically delivered on the external interface and running through everything, once again, this time as a decrypted packet. If the package hits the ACL twice, once encrypted and clear once.
Your external ACL shall include the non encrypted and encrypted form of the package.
Now, if you're afraid that people can then simply spoof packets to come from 10.1.1.0 and they will be allowed through your router, bzzzt, wrong. The first thing that the router checks when it receives a packet on an interface with a card encryption applied is that if the package needs to be encrypted, it is from his crypto ACL and its IP pools. If he receives a decrypted packet when it knows that it must have been encrypted, it will drop the package immediately and a flag a syslog something as "received the decrypted packet when it should have been."
You can check on the old bug on this here:
http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCdz54626&submit=search
and take note of the section of the security implications, you may need to slightly modify your configuration.
-
Hi all
For a need for one of my clients, I am trying to configure VPN on demand with a Cisco ASA 5520
The goal is that AnyConnect will prompt you for a connection when users use a specific application (SAP portal) & only at this time
They use for Windows XP operating system
I can't find examples of this type of configuration, I'm not even sure it's possible
Anyone of you have an idea for this?
Thanks in advance!
Demand is currently only available on the IOS ONLY function
Sent by Cisco Support technique iPad App
-
VPN connect for iPHone ios 10 to fvs318v3
Hello
I want to connect an iphone with ios 10 via vpn to the fvs318v3
Supports the IOS 10
- L2TP/IPSec
- IKEv2/IPSec
- Cisco IPSec
I trieed to connect on ikev2 but I have no connection. I see messages in the log on the SWF file, with
.. invalid major version...
what I could do to get a connetion.
thanx
Hi JohnRo,
Thanks for your help.
I try with another model.
Vision99
-
iPhone 2.0 &; 2811 IOS VPN
Hello
My iPhone can establish a session isakmp and get an address IP etc with my IOS 12.4 VPN on a cisco 2811.
However, when I try and pass traffic, the connection of 2 ipsec phase ends the tunnel.
I get the error as
IPSec invalidated policy proposal
Jul 31 13:13:32.590: ISAKMP:(0:791:HW:2): politics of ITS phase 2 is not acceptable!
and also
CRYPTO-6-IKMP_MODE_FAILURE: fast mode processing failed with the peer to
Someone at - it an iPhone 2.0 to work with a 2811?
It works with an ASA (not sure which model however)
Thank you
Take a look at this:
http://discussions.Apple.com/thread.jspa?MessageID=7221787
"What Cisco platforms work with Cisco VPN Client on the iPhone?
PIX firewall and Cisco ASA 5500 security equipment. We recommend the latest version of the software 8.0.x (or), but you can also use software 7.2.x.
Routers of Cisco IOS nor series VPN 3000 Concentrators VPN supports iPhone VPN features. "
Concerning
Farrukh
Maybe you are looking for
-
Hello I bought a stream HP x 360 with a (supposedly) emmc2 disk 32 GB. When I first turned it on, I checked the storage capacity, it is said that there was only 21.3 GB which only 16 GB is free. This means, to first of ALL, I lost HALF my storage cap
-
Where can I find a list active files copy shadow on my pc so I can thin it. ?
I know that it is there, somewhere that I can't seem to find it today.
-
Update cumulative security for IE8 for Windows Vista for x 64-based systems (KB2360131)
Download of the update above completely changes my settings. I can no longer choose a Standard Windows Vista or a theme based on my computer, only a Standard Windows one. Is there a solution to this? Or some elements of the update I should not simply
-
can not connect to any microsoft web site.
Unable to connect to any microsoft web is located.
-
I went through the process of the sfc/scannow and got these errors.
2012-06-07 10:09:45, CSI Info 000001 d 8 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKey