IOS VPN: Key not found in the profile key, abandonment of exchange rings

Can someone give me directions to solve a problem with config VPN L2L 2821-2821 please?

The router's config only L2L.

Router B has the VPN and L2L customer profiles.

The part of VPN client works very well. The L2L gives the error on router B when the tunnel is started from router A:

044234: 14:20:45.830 Dec 1: ISAKMP: (1572): former State = new State IKE_R_MM4 = IKE_R_MM5

044235: decrease 1 14:20:45.830: ISAKMP: (1572): payload ID for treatment. Message ID = 0
044236: 14:20:45.830 Dec 1: ISAKMP (1572): payload ID
next payload: 8
type: 1
address: a.b.c.d
Protocol: 17
Port: 500
Length: 12
044237: decrease 1 14:20:45.834: ISAKMP: (0): counterpart is wup_l2l profile
044238: 14:20:45.834 Dec 1: ISAKMP: (1572): key to the ADDRESS found in keyring wup_l2l_keyring
044239: 14:20:45.834 Dec 1: ISAKMP: (1572): key not found in the profile key, abandonment of exchange rings
044240: 14:20:45.834 Dec 1: ISAKMP (1572): action of WSF returned the error: 2
044241: 14:20:45.834 Dec 1: ISAKMP: (1572): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
044242: 14:20:45.834 Dec 1: ISAKMP: (1572): former State = new State IKE_R_MM5 = IKE_R_MM5

044243: 14:20:45.854 Dec 1: ISAKMP: (1572): peer does not paranoid KeepAlive.

044244: 14:20:45.854 Dec 1: ISAKMP: (1572): remove the reason of HIS 'IKMP_ERR_NO_RETRANS' State (R) MM_KEY_EXCH (a.b.c.d peer)

The configuration I used is comprehensive guide Cisco Press Cisco VPN (Richard Deal)

I checked the keys on each side.

I checked the configuration with other Cisco documents.

I've added definitions of key host in addition to the main address definitions.

As far as I can see the profiles match on each side.

I'm at a loss to interpret the error he apparently found a key and then immediately, not found a key.

I work on securing and extract the relevant parts of my configs for the display, but if someone has indications now it would be much appreciated.

Thank you

You can try to remove the host name pre-shared key from the Keyring key and test?

Tags: Cisco Security

Similar Questions

  • When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

    whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

    Hello

    Thanks for posting your question in the Microsoft community forum!

    I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

    (1) is the issue limited to only Corel Draw?

    I suggest you to restore the default values by pressing the F8 key while the program starts.

    Reference: File not found valid environment...

    http://CorelDRAW.com/forums/t/4156.aspx

    If the problem persists, I suggest you contact the link mentioned below for the best support.

    http://CorelDRAW.com/forums/

    Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

  • WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    Hi, we get this error in an independent ADR on Grizzly implemented.

    August 14, 2014 09:59:05

    oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or a table has not been found in the schema:

    APEX_LISTENER

    Oracle.dbtools.rt.web.WebErrorResponse 09:59:05 August 14, 2014

    internalError

    GRAVE: JDBCException [kind = NO_DATA]

    JDBCException [kind = NO_DATA]

    defaults.xml "XXXXX" designate removed for safety, front of post

    <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

    < ! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

    Properties of <>

    < comment > saved on Mon Aug 04 16:25:09 EDT 2014 < / comment >

    < key "cache.caching entry" = > false < / entry >

    < key = "cache.directory entry" > / tmp/apex/cache < / entry >

    < key = "cache.duration entry" > days < / entry >

    < key = "enter cache.expiration" > 7 < / entry >

    < key = "enter cache.maxEntries" > 500 < / entry >

    < key = "enter cache.monitorInterval" 60 > < / entry >

    < key = "cache.procedureNameList" / entry >

    < key = "cache.type entry" > lru < / entry >

    < key = "db.hostname entry" > XXXXXXXXX < / entry >

    < key = "db.password entry" > XXXXXXXXXXX < / entry >

    < key = "db.port entry" > XXXX < / entry >

    < key "db.sid entry" = > XXXXXX < / entry >

    < key "debug.debugger entry" = > false < / entry >

    < key "debug.printDebugToScreen entry" = > false < / entry >

    < key "error.keepErrorMessages entry" = > true < / entry >

    < key = "enter error.maxEntries" > 50 < / entry >

    < enter key = "jdbc. DriverType"> thin < / entry >

    < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

    < enter key = "jdbc. InitialLimit' > 3 < / entry >

    < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

    < enter key = "jdbc. MaxLimit' 10 > < / entry >

    < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

    < enter key = "jdbc. MinLimit"> 1 < / entry >

    < key = "enter jdbc.statementTimeout" > 900 < / entry >

    < key "log.logging entry" = > false < / entry >

    < key = "enter log.maxEntries" > 50 < / entry >

    < key = "misc.compress" / entry >

    < key = "misc.defaultPage entry" > apex < / entry >

    < key "misc.enableOldFOP entry" = > true < / entry >

    < key "security.disableDefaultExclusionList entry" = > false < / entry >

    < key = "enter security.maxEntries" > 2000 < / entry >

    < / properties >

    Complete log

    August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

    INFO: NOTE:

    Stand-alone mode is designed for use in development and test environments. This not is not supported for use in production environments.

    August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

    INFO: Starting standalone Web container to: / u00/home/oracle/ords/ords

    August 14, 2014 11:28:14 oracle.dbtools.standalone.Deployer deploy

    INFO: Deploy the application = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml path

    August 14, 2014 11:28:17 oracle.dbtools.standalone.Deployer deploy

    INFO: Deploy the application path = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml

    August 14, 2014 11:28:18 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

    INFO: Using the configuration file: / u00/home/oracle/ords/ords

    Configuration properties for: apex

    cache. Caching = false

    cache. Directory = / tmp/apex/cache

    cache. Duration = Days

    cache.expiration = 7

    cache.maxEntries = 500

    cache.monitorInterval = 60

    cache.procedureNameList =

    cache.type = LRU

    DB. HostName = XXXXXXXXXXXXXXXXXXX

    DB. Password = *.

    DB.port = XXXXXXXXXXXXXXXXXXX

    DB.sid = XXXXXXXXXXXXXXXXXXX

    Debug.Debugger = false

    debug.printDebugToScreen = false

    error.keepErrorMessages = true

    error.maxEntries = 50

    JDBC. DriverType = thin

    JDBC. InactivityTimeout = 1800

    JDBC. InitialLimit = 3

    JDBC. MaxConnectionReuseCount = 1000

    JDBC. MaxLimit = 10

    JDBC. MaxStatementsLimit = 10

    JDBC. MinLimit = 1

    jdbc.statementTimeout = 900

    log. Logging = false

    log.maxEntries = 50

    Misc.Compress =

    misc.defaultPage = apex

    misc.enableOldFOP = true

    security.disableDefaultExclusionList = false

    security.maxEntries = 2000

    DB. UserName = APEX_PUBLIC_USER

    August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. MaxLimit in the apex of configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. InitialLimit in the apex of configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

    Using the JDBC driver: Oracle JDBC driver version: 11.2.0.3.0

    August 14, 2014 11:28:28 oracle.dbtools.rt.web.SCListener contextInitialized

    INFO: Oracle REMAINS initialized data Services

    Version of REST Data Services Oracle: 2.0.8.163.10.40

    The Oracle Data Services REST server info: Grizzly/1.9.49

    August 14, 2014 11:28:28 com.sun.grizzly.Controller logVersion

    INFO: GRIZZLY0001: from Grizzly Framework 1.9.49 - 14/08/14 11:28

    August 14, 2014 11:28:28 oracle.dbtools.standalone.Standalone run

    INFO: http://localhost: 8080/ADR / began to.

    Configuration properties for: apex_al

    cache. Caching = false

    cache. Directory = / tmp/apex/cache

    cache. Duration = Days

    cache.expiration = 7

    cache.maxEntries = 500

    cache.monitorInterval = 60

    cache.procedureNameList =

    cache.type = LRU

    DB. HostName = XXXXXXXXXXXXXXXXXXX

    DB. Password = *.

    DB.port = XXXXXXXXXXXXXXXXXXX

    DB.sid = BXXXXXXXXXXXXXXXXXXX

    Debug.Debugger = false

    debug.printDebugToScreen = false

    error.keepErrorMessages = true

    error.maxEntries = 50

    JDBC. DriverType = thin

    JDBC. InactivityTimeout = 1800

    JDBC. InitialLimit = 3

    JDBC. MaxConnectionReuseCount = 1000

    JDBC. MaxLimit = 10

    JDBC. MaxStatementsLimit = 10

    JDBC. MinLimit = 1

    jdbc.statementTimeout = 900

    log. Logging = false

    log.maxEntries = 50

    Misc.Compress =

    misc.defaultPage = apex

    misc.enableOldFOP = true

    security.disableDefaultExclusionList = false

    security.maxEntries = 2000

    DB. UserName = APEX_LISTENER

    August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

    ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

    August 14, 2014 11:32:03 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    August 14, 2014 11:40:49 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

    WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

    August 14, 2014 11:40:50 oracle.dbtools.rt.web.WebErrorResponse internalError

    GRAVE: JDBCException [kind = NO_DATA]

    JDBCException [kind = NO_DATA]

    at oracle.dbtools.common.jdbc.JDBCException.wrap(JDBCException.java:88)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:63)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:38)

    at oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher.tenant(JDBCTenantDispatcher.java:98)

    at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:71)

    at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:37)

    at oracle.dbtools.rt.web.ReTargetingDispatcher.canDispatch(ReTargetingDispatcher.java:45)

    at oracle.dbtools.rt.web.RequestDispatchers.choose(RequestDispatchers.java:160)

    at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:75)

    at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)

    at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)

    at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

    to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.doFilter (ServletAdapter.java:1059)

    to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.invokeFilterChain (ServletAdapter.java:999)

    at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)

    at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)

    at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)

    at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

    at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)

    at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)

    at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)

    at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)

    at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)

    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)

    at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)

    at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)

    at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)

    at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)

    at com.sun.grizzly.ContextTask.run(ContextTask.java:71)

    to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:532)

    to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:513)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)

    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)

    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)

    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)

    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)

    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)

    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:886)

    at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1175)

    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1288)

    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)

    at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3656)

    at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:111)

    to com.sun.proxy. $Proxy44.executeQuery (unknown Source)

    at oracle.dbtools.common.jdbc.JDBCQueryImpl.resultSet(JDBCQueryImpl.java:92)

    to oracle.dbtools.common.jdbc.JDBCResultRowIterator. < init > (JDBCResultRowIterator.java:29)

    at oracle.dbtools.common.jdbc.JDBCQueryImpl.execute(JDBCQueryImpl.java:52)

    at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:60)

    ... more than 33

    DBA has forgotten to run apex_rest_config.sql Doh!

  • error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

    I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

    These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

    • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
    • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    where the name of the Program Files folder may vary depending on the region.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

    Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

    TT2

  • Wacom Cintiq 13HD - "a supported Tablet not found on the system."

    You just bought a 13HD Cintiq (no touching) and installed the drivers Wacom on my Macbook Air w / OS X 10.11.4. It works as a second screen, but I can't get the pen to do anything and when I look in the preferences system under the Wacom component I see nothing except a message stating "a supported tablet was not found on the system." I have installed the latest driver and two former previous drivers and restarted several times now. Any help?

    That's what I see in the system Pref Pane:

    Have you checked the forum Wacom for possible solutions?

  • W2K & Flash install - SetDllDirectoryW is not found in the KERNEL32.dll dynamic link library.

    fully patched W2000 SP4 - try to install or update flash adobe gives "the procedure point SetDllDirectoryW entry is not found in the dynamic library KERNEL32.dll." said ths for both FF and IE versions of the flash Installer... it just started recently... at least since the beginning of 2012... mcafee or norton stuff has never been near this box... This is (vascular) limited to install or update flash...

    NOTE: had to choose ' Other/unknown' for windows option version in these forums, because some spark deletion of the option "Windows 2000":? :(

    I'll just post a link to workarounds to the case where someone else wants:

    http://forums.Adobe.com/thread/965334

    Because Windows 2000 is out of support and has had no updates Microsoft security since July 2010, I'm puzzled why people are so concerned about having a Flash Player update. The exploits are likely to be totally confused.

  • AutoCorrelate not found in the DLL

    Hello

    I get the runtime error after when I try to use the function AutoCorrelate in Labwindws 2012.

    Function AutoCorrelate: (return value is-5094 [0xffffec1a]). Function not found in the scan DLL library.

    I have included advanlys.h at the top of my function and added the LFP to advanced for my custom libraries of CVI analysis.  I am tring to use the sample code I copied and pasted from the online help documentation.   I can't locate the corresponding advanlys.dll the advanlys.h wants to make reference.

    Example code below:

    #include "advanlys.h".

    Double x [256], rxx [512];

    int n; n = 256;

    Uniform (n, x, 17);

    AutoCorrelate (x, n, ALGORITHM_CORCOR_NO_NORMALIZATION, rxx);

    Same here, but I noticed that my sharing folder is the same as my old CFS files developed with CVI 8.5.1.

    CVI shared Dir = "/ C/Program Files (x 86) /National Instruments/Shared/CVI.

    I looked more closely in this folder structure and concluded that:

    C:\Program Files (x 86) \National Instruments\Shared\Analysis

    published the nianlys.dll of CVI 8.5.1.    My new installation of 2012 has made this squash a copy later.

    Maybe it's the first of many cases where older versions with new conflict.    I regret trying to keep the old version of the CVI on this machine to support the previous facility.

    Thank you for leading me in the right direction!

    Best regards

    Phil

  • "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

    I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

    Jim

    You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

    If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

    MowGreen Services update - consumer safety

  • Cannot install KB982331 KB981715 & KB982312 "the expected version of the product is not found on the system.

    I have the Compatibility Pack installed so that I can open .docx files of type 2007 etc.  Apparently the updates of Windows 'think' I have Office 2007 if updates following KB982331, KB981715 and KB982312 are queued to be installed, but they are unable to install it because I have not Office 2007 is installed.

    When I try to install the tool in stand-alone via the following links

    KB982331

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en

    KB981715

    http://support.Microsoft.com/kb/981715 and select download package now.

    KB982312

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=6deb4fb0-CBFC-40DF-8F62-35fa1db0e167&displaylang=en

    I get an error correctly indicating that "the expected version of the product is not found on the system.  So they will never install successfully but Windows Update won't jump that updates are not necessary.

    Does anyone know how to remove these updates to install?

    Thank you

    Chuck

    Support of Microsoft's solution was to uninstall the Office 2007 Compatibility Pack.   I chose to ignore the updates and keep the ability to view Office 2007 extensions.

    In addition, contact the support does not count as a solution, especially when the problem is not resolved by the project "fix."

  • Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

    Original title: Plustek OpticBook 3600 is not installed

    Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

    PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

    Hello
    You can try the troubleshooting provided in the link below steps to fix the problem.

    You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

    http://support.Microsoft.com/kb/841567

    Note:

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

    See also:

    Error message: cannot install hardware. An error occurred during the Installation of the device

    http://support.Microsoft.com/kb/810882

  • I have Windows XP, her border is my home page, when I click on a story, Yahoo page appears, 404 not found, sorry, the page you requested has been

    I have Windows XP, the border is my home page, when I click on a story, Yahoo page appears, 404 not found, sorry, the page you requested

    not found.   If I go to Google Chrome, it works perfectly!   I do not use Chrome because their title stories are not up-to-date.

    http://answers.Yahoo.com/question/index?QID=20080118090732AAeKoF1

    Border is powered by Yahoo, try the thread above, see if it will solve your problem.

  • Application has failed to start because msa32dl was not found, reinstalling the application may fix the problem

    How can I fix it?
    application has failed to start because msa32dl was not found, reinstaling the application may fix the problem

    First make sure that your system is clean in:

    Download, install, update and scan with these full free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/

    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

    http://www.eset.com/us/online-scanner/ eset online scanner

    Then answer the following questions:

    brand and model of the pc

    current antivirus

    Operating system and service pack

    What application fails to start?

  • "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

    During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    How to troubleshoot an installation fails on Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950718

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Downloads of SP3: -.

    Windows XP Service Pack 3 - file to Image CD ISO-9660:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

    Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

    How do you know if you are running a 32 bit / X 86 or 64-bit computer

    1. Click Start.

    2. Do right click my computer and then click Properties.

      • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

      • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

  • Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

    Original title: ntdll.dll error at boot fruity loops.

    get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

    Hello
    I suggest you contact support FL. I couldn't find all of the resources for this program.
    Eddie B.

Maybe you are looking for