IOS VPN will not respond to connections Cisco VPN Client.

Hi all

I'll put my routers fire here.

I have two 2921 SRI both with licenses of security concerning leased lines separated. I configured one to accept our workers to remote Client VPN Cisco VPN connections.

I have followed the set up process I used on another site with a router 1841/s and the same customers and I have also checked against the config given in the last guide of IOS15 EasyVPN.

With debugs all assets, all I see is

038062: 14:03:04.519 Dec 8: ISAKMP (0): received x.y.z.z dport-60225 Global (N) SA NEW 500 sport package
038063: 14:03:04.519 Dec 8: ISAKMP: created a struct peer x.y.z.z, peer port 60225
038064: 14:03:04.519 Dec 8: ISAKMP: new position created post = 0x3972090C peer_handle = 0x8001D881
038065: 14:03:04.523 Dec 8: ISAKMP: lock struct 0x3972090C, refcount 1 to peer crypto_isakmp_process_block
038066: 14:03:04.523 Dec 8: ISAKMP: (0): client setting Configuration parameters 3E156D70
038067: 14:03:10.027 Dec 8: ISAKMP (0): packet received x.y.z.z dport 500 sport 60225 Global (R) MM_NO_STATE

Here is the abbreviated config.

System image file is "flash0:c2900 - universalk9-mz.» Spa. 154 - 1.T1.bin.

AAA new-model
!
!
AAA authentication login default local
local VPNAUTH AAA authentication login
AAA authorization exec default local
local authorization AAA VPN network
!
!
!
!
!
AAA - the id of the joint session

crypto ISAKMP policy 10
BA aes
preshared authentication
Group 14

ISAKMP crypto group configuration of VPN client
key ****-****-****-****
DNS 192.168.177.207 192.168.177.3
xxx.local field
pool VPNADDRESSES
ACL REVERSEROUTE

Crypto ipsec transform-set aes - esp esp-sha-hmac HASH
tunnel mode

Profile of crypto ipsec IPSECPROFILE
the HASH transform-set value

dynamic-map crypto VPN 1
the HASH transform-set value
market arriere-route
!
!
list of authentication of card crypto client VPN VPNAUTH
card crypto VPN VPN isakmp authorization list
crypto map VPN client configuration address respond
card crypto 65535-isakmp dynamic VPN ipsec VPN
!
!
local IP VPNADDRESSES 172.16.198.16 pool 172.16.198.31

REVERSEROUTE extended IP access list
IP 192.168.0.0 allow 0.0.255.255 everything
Licensing ip 10.0.0.0 0.0.0.255 any

scope of IP-FIREWALL access list
2 allow any host a.b.c.d eq non500-isakmp udp
3 allow any host a.b.c.d eq isakmp udp
4 ahp permits any host a.b.c.d
5 esp of the permit any host a.b.c.d

If anyone can see anything wrong, I would be very happy and it would save the destruction of a seemingly innocent router.

Thank you

Paul

> I would be so happy and it would save the destruction of a seemingly innocent router.

No, which won't work! But instead of destroying the router, I can do it for you. Just send it to me... ;-)

OK, now more serious...

  1. The default Cisco IPSec client uses only DH group 2, while you set up the 14. Try to use Group 2 in your isakmp policy.
  2. You have your virtual model in place? She is not in the config.

Tags: Cisco Security

Similar Questions

  • Can't connect, connection startup screen will not respond to mouse clicks or keyboard

    I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

    Separated from the:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

    Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

    You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

    Tricky

  • SYSTEM WILL NOT RESPOND FOR 1 MIN AFTER THE CONNECTION

    Once connected to my system after a reboot it will not respond for atlesat 1 minute. I can open some software like firefox... but I can't open Control Panel or modify a system

    Hi mohdrafi,.

    (a) since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

    This problem may occur because of the conflict between the hardware or programs on the computer.

    To refine the question, I suggest you try the following steps:

    Disconnect all external devices, mainly USB devices except for devices such as the mouse and keyboard.

    Check if the problem persists,

    Step 1: Disable security software, follow the steps mentioned below

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Activate security software once the test is completed.

    Step 2: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below.

    Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    If everything works properly in safe mode, you can deduce that some third-party services are at the origin of the problem.

    Step 3: Put the computer to boot to figure out program causing problem.

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    For more information, see the link below:

    What to do if Windows does not start successfully

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    This might interest you:

    5 ways to speed up your PC
    http://www.Microsoft.com/atwork/maintenance/speed.aspx

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Start PC laptop Toshiba in safe mode, only displays black screen, will not respond to any commands.

    Hello, I recently tried to do an advanced start safemode, because when I tried to do safe mode by pressing F8 it would have not responded to the command. Then I did a MSconfig, lit manually in safe mode, so I can then restart and do a scan to search for viruses or hackers of air because he had a reason to suspect. Now, after the manual switch, when I rebooted all I get is a black screen. No logo, nothing. When I press the buttons for the controls at first upward, it beeps at me and that's it.

    Done, I have XP, not Vista, don't know if it makes much difference or not, but that's exactly what I did.

    Is went to start, click Run, type msconfig, went to the utility system configuration, general tab selected, then the system of services. Then selected drivers devices of loading at startup Safemode-minimal database, and then click OK. Then, the computer said I had to be logged as administrator for these changes to take place and to connect and make changes. I was already logged as admin. so I advanced and restarted the computer and that's when I got black screen, no splash screen, no logo, no cursor.

    I just read that I could have possibly messed up by not checking the VGA mode in order to be able to communicate in this mode, I don't know if it is correct or not.

    I have my recovery discs, I've tried this morning, following their directions and it will not respond to one of these orders either.

    I don't understand, why... it was working fine before I did it, but like I said I suspected a virus or a hijacker, but my Norton 360 and SuperSpyware nothing not detected in normal mode. That's why I tried to safe mode.

    Here is the vista forums

    Try the forums xp on the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Answers by topic

    Walter, the time zone traveller

  • iTunes will not respond on Macbook Pro

    My iTunes will not respond when I hit the play button. My version of iTunes is 12.4.1.6. It worked when I bought my mac, but now, he won't answer. It works on my iPhone, but not my Mac. Any suggestions?

    iTunes you know on a Mac does not run on an iPhone. It's a completely different operating system. It is also a completely different application that Apple in a fit of lack of creativity has given the same name as the thing on a computer, but it's a different function.

    You have restarted your computer?

  • With Firefox my fonts e-mail decreased and will not respond to reset, but problem goes away when you use Explorer

    With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.

    Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?

    Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

  • I've updated to Firefox 8, now, it will not keep Me connected to all the sites!

    Everything was beautiful and brilliant. Then I updated to Firefox 8. Now any website I want to (Amazon, Facebook, Twitter, etc.) will not keep me connected when I check the box to do so. As soon as I close Firefox and reopen it, I have to log in again, even if on some sites it's to remember my username and password (just do not keep me logged).

    I tried to delete all cookies and history and still nothing.

    Does anyone else have this problem?

    In the privacy section of the Firefox options, make sure that Firefox is configured to accept cookies and that it is not set to clear history of Firefox closing.

    (If you use the default "Remember history" then it should work fine. If you use the "customized for the history settings" setting, and then make sure that "Accept cookies" is checked and "clear history of Firefox closing is not checked.)

  • Satellite Pro L450D black screen and will not respond to any keys

    Hello

    My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

    Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

    A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

    As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

    + Windows 7 +.
    + Recover Windows to Factory Settings [active EMS] +.

    So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

    I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

    I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

    Any help would be grateful.

    Hello

    Have you tried the option of HARD drive recovery?

    If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
    Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

    I hope it will work!

  • Satellite L300 will not let me connect

    My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

    Help!

    Who knows what's the problem here?
    Maybe you should install new OS. You can enter boot options using F8 at startup?

    Repair my computer option is available?

  • Apple TV will not maintain a connection with my Samsung

    Apple TV will not maintain a connection with my Samsung TV UHD.  All other devices work well with it.  I tried switching ports HDMI and cables without change.  Apple TV can turn on and turn off, plug in for 10 seconds, or not at all.  (Note: Apple TV is still in install mode, because it does not appear long enough to complete the process.)

    HELP, PLEASE.

    Which TV model you have?

  • Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

    hardware device

    my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

    Hello

    What operating system installed on the computer?

    Note: Look for errors in the network card device manager.

    Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

    For more information, follow the below mentioned article:

    Set up a wireless router:

    http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

    Follow the below mentioned articles and see if they help you:

    Set up a wireless network:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Wireless network card: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  • Windows XP will not respond to the keyboard or the mouse. Why it is not working.

    Well, I have the version of Windows XP Home Edition-32, Service Pack 2. I bought a keyboard gear yesterday with a mouse optical usb Dynex. My old keyboard and mouse were completely irreparable; I threw the. I plugged my new usb devices. When Windows has finished loading need me for my logon screen. However, my mouse and keyboard will not respond. This prevents me from going further. In addition, they will not respond during startup, the BIOS or the Windows Advanced Options Menu. I don't have a recovery disk. I bought the computer with XP already on this subject, so I do not have the disk to the operating system. What is my next step?

    I bought PS/2 devices, and they work perfectly. Thanks for the tip.

  • Outlook express opens but will not respond to anything I try to do

    Outlook express opens but will not respond to anything I try to do

    You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
     
    Note: Do not use the main word in the name of the new identity.
  • I have a Dell dimension running XP and IE8 will not respond

    I have a Dell Dimension 4500 XP pro and IE8 will not respond.
    When I click it it flashes up on top of the screen and disappears. To this effect, I can't watch the updates from Microsoft.

    Any ideas, anyone please?

    Delete.

    Hi guys,.
    It seems that my problem is solved.
    I removed a lot of the years of updates then run my drive setup and turned off and went to bed.
    When I turned on this morning I had to install updates. It was the only thing I was worried, and as this seems to be fixed, I am glad I use Firefox as my browser.

    I installed Speccy and he ran and it shows as running windows updates and it works correctly.

    Thanks a lot for all your help guys.

    Delete.

  • How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

    Use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    Go to method 3.

    3. for the network icon.

    (B) to activate the icon network - Enable_Network.reg< click="" to="">

    * Don't forget to restart to complete the procedure. ***

Maybe you are looking for