iOS10 update; iPad 2 Air not USB load with certified Amazon lightning cable

iPad 2 Air and iOS 10: been using an Amazon certified cable lighting to load and iTunes connect via the USB port of > 1 year without any problem. Updated to iOS 10, now the certified cable doesn't load a USB port. It always connects to iTunes, but the sign of the battery flashes the fresh green symbol for 1 second then said stops and says 'no charge '. Tried on 2 USBs and 2 PC with the same result. Tried another brand cable via USB and it costs.

When I plug this cable from Amazon in the wall charger, it will load. Seems to be something with the iOS10 not recognize the USB load now on this certified cable. I didn't call Apple support on that too, they have no idea what's going on. Their answer is to use an Apple cable of course. Any help is appreciated.

The cable of the Amazon is located here:

https://www.Amazon.com/DP/B010U3XVMU/ref=cm_cr_ryp_prd_ttl_sol_0

It seems there is no real solution beyond using another cable. There were a few people with this problem since iOS10 came out, so it's likely Apple changed something in the settings. As they changed it, it's either a mistake which will mysteriously set with the next update or it's going to be permanent.

Tags: iPad

Similar Questions

  • ios10 updated ipad pro does not

    My ipad 9.7 pro is completely unresponsive since I tried to install ios10 OTA. the black screen connect to itunes is now show and ive tried for almost 12 hours to restore my ipad pro. nothing works. I rebooted rebooted imac, ipad, I get the error message from 1671. "itunes is downloading software for iPad" and it does not work.

    I can't restore or update my ipad. I'm so disappointed by Apple!

    can someone here help me with suggestions/ideas? right now it's like a Clipboard.

    First make sure you have the latest version of iTunes (12.5.1), otherwise download then from Apple and install or update. Connect your iPad to your computer and open iTunes.  It should invite you to re - install iOS. It takes a while, but to download the file and install ok.

    I had 2 devices are similarly and with patience, he worked through.

  • Why are some emails not to load with Firefox, but do it with Patrick and IE?

    I have an email account with Yahoo.com and I get my mail on a desktop W8.1 PC and an iPad. The Bureau uses Firefox as the browser 41.0.2; the iPad uses Safari.

    Use the office, I find that many (but not all) of the messages that I see in the list of incoming messages fail to display, i.e. they fail to complete the download after I click on them. If I click on any of these stray messages on the iPad, however, it loads immediately.

    If I close Firefox on the desktop and go to IE and then access the e-mail account Yahoo, the stray message < > is displayed.

    I conclude that the problem was with Firefox, right? Is someone can you please tell me how I can fix this bug so that I can download all my incoming messages on the desktop?

    I want to delete, and then reload Firefox to see if that fixes the problem. Can someone please tell me how to save and restore all my favorites in the process?

    Thank you.

    Comments: I cleaned my cache and temporary files using Old Timer TFC and that seemed to cure the problem. Thanks for your help. .. .wdc202

  • Flash animations do not always load with Firefox 13.0.1

    Flash animations will not play even after the upgrade to Firefox 13.0.1

    Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 13 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

    To resolve this problem, follow the steps in these articles in the Knowledge Base:

    Flash Plugin - maintain and troubleshoot

    Adobe Flash plugin has crashed - avoid that it happen

    11.3 Flash does not load video in Firefox

    We'll find other information on more technical issues under these links:

    http://forums.Adobe.com/thread/1018071?TSTART=0

    http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

    Please tell us if it helped!

  • txt on the new iPad 2 Air messages only works with other Apple users.   How to send and receive SMS users iMessages?

    I can only use iMessage on my new iPad Air 2 with other Apple users.    Why can't send and receive text messages with SMS people?

    You need an iPhone and then use continuity iOS features to do - continuity use to connect your iPhone, iPod touch and Mac - Apple Support

    An iPad is natively unable to send SMS text messages such as those that require a connection of cellular voice channel.

  • Computer hung over the Windows, restarted, update now it does not start even with the installation CD, Get blue screen with the stop message.

    Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly understand exactly what happened when you tried this update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • After the upgrade to CS5 Audio is not import / load with video in avi format

    1. I've updated since Ppro CS3 to CS5 purchased in the Adobe store.

    1. I opened a project created in CS3 to CS5 and followed by the prompt to save it in a new project.

    1. All securities, modifications, etc. were intact and a given sequence played re-rendering etc as expected.

    1. I created a new project, any one of the same avi files used in step 2. Yet once again, everything worked properly

    1. I ran the Update menu in Agency assistance to 5.0.3. I ran this process two different times.  The first time, I selected all the updates.  The second time, I only updated itself.  I did a system restore in the meantime, the following results were identical in the two situations.

    1. Now when I open convert it or proposed new file, agency reports the media as 'offline'... is not. If I "Link Media" the file, I get this message: the selected file does not recording media used by clip contain references in one or more sequences. These references audio clip will be deleted and cannot Ωtre annulΘe. Want you? »

  • Gspot.exe reports as MJPG video codec and audio codec MPEG - 1 Layer 2

    1. Avi files have been made on a MAC from. MOV to AVI. Here are the properties of the file that the agency reports:

    Path of the file: E:\CONVERTED\3-1

    Type: QuickTime Movie

    File size: 21.9 GB

    Image size: 1440 x 1080

    Sampling: 24

    Frame rate: 29.97

    Total time: 00:23:47:20

    Average: 15.7 MB/second

    Format of the pixels: 1.3333

    1. Something in the 5.0 to 5.0.3 update is the problem.

    Running on Windows 7, x 64, latest updates

    Possibilities of technology is a much larger proposal because I'm not cool enough to have a friend of mac with the right camera and cpu...

    It's funny...

    I think my last question is what is the preset edition cs5 optimal for MOV files that I have?

    If this is the film that will change you, the simple solution is just one of the clips slide the button new item at the bottom of the Panel project; It's one that looks like a chipped sheet. This will create create a new sequence corresponding to your images settings as closely as possible.

    In General, however, is not really an "optimal" preset for any data type of sequences. Premiere Pro is quite flexible, you can use images of any kind in any kind of sequence you want or need. Certainly, in most applications, you want things like the size of the image, pixel format and cadence to match your images, but it not always necessary or even desired. I often work in sequences that are almost completely different from my source footage - it really depends on your personal preferences to work and your desired output. For example, I often work with assets of 1080i/p, but need to output to SD output. in this case, I don't even bother with an HD sequence preset.

    How's this for the decarceration

    Anyway, I'm glad you're on the way to resolution. Here he didn't cost a C-note, more!

  • FLV files do not play loading with PHP

    Hi, I am building a website using PHP to load subpages, etc. in the index.php page.

    with DW CS4, I have problems with FLV files located on these subpages. they just appear.

    I think it has something with the paths to do but he cannot know.

    the url is http://www.onion-Berlin.com/test

    everything works on the cover page (the film is loaded on a page of mustavuori.php).

    But if you go to the page of film/mustavuori, the film is not load correctly.

    any ideas?

    Another thing that concerns me since the beginning:
    What is the meaning of the flash id (in the first line of code)?

    It is used by the swfobject JavaScript and is being implemented in line 78 to http://www.onion-berlin.com/test/ . Which is normally inserted at the bottom of a page.

    on this page, the logo is a small flash file, and it has the same exact id.

    You should never have two identical pieces of identification on a page. One of them give a different id and add a line to this JavaScript. But now you have a bunch of redundant stuff downstairs. I scan all the code on this page, but the lines of swfobject.registerObject () should correspond to the codes provided in the object/embed codes.