Ios10 updated and now can't make or receive phone calls. Help!
Ios10 updated and now can't make or receive phone calls. Help!
Try a forced reboot. He can heal really weird unexpected behavior. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
Tags: iPhone
Similar Questions
-
I can use my data and it works perfectly fine but the only problem is that I can't call someone or receive phone calls. I don't know what's the matter with him so I would if anyone can help e telling me how to fix it...
You will need to contact your carrier and let them fix the problem with your account.
-
BlackBerry smartphones can not make or receive phone calls
This morning, having never had a problem with my phone before, I have a message that says "SIM card rejected" right to the very top center of my screen. In the very right corner it says "SOS" in red. My phone is less than 2 months old. Please tell me this is an easy solution. I'm very techno-challenged.
Hello
In this case, we can try to reload the software on the BlackBerry smartphone to make sure she is running the most recent version and there is no problems with the operating system.
Here's how to make a backup of your BlackBerry smartphone http://bbry.lv/kqMaD3
Once you have saved your BlackBerry smart phone, please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test and go ahead with selective restore, here is how to restore http://bit.ly/bSbfl3
Thank you
-
sound was about a month and my iPhone 6 won't make or receive phone calls and if I try to make a call it will juice gel ANDS pie acing upward it is when someone tries to call me at first, he would make a weird noise but now its just silence and does nothing, but crashes until I force shut it down. and I want to know how I can fix it if possible and also I tried to reset my phone and take the sims card out and also to reset the cell settings.
Hi moraless___,
Thank you for using communities Support from Apple!
I understand that you are not able to make or receive phone calls on your iPhone because it becomes unresponsive. Is this the only feature that does not work as expected?
I see that you have already tried to restart your iPhone and the relocation of the SIM card, but the issue continues. To continue troubleshooting, there are a few steps, I recommend you.
First, close the phone completely application.
Force an app to close iOS - Apple Support
Once the phone has been closed, restart your iPhone again, as you did previously.
Restart your iPhone, iPad or iPod touch - Apple Support
If the problem persists after these steps, please let us know so that we can continue to help you troubleshoot and fix this problem.
Best!
-
Unable to make or receive phone calls after installing IOS 10
Unable to make or receive phone calls after installing IOS 10
Hi Drovers run,
I understand that after updating your iPhone to iOS 10, you are more able to send or receive phone calls. I know it's important to be able to use your iPhone as a phone, so I'm happy to provide assistance.
Read this article to help to make and receive calls:
If you cannot make or receive calls on your iPhone - Apple SupportThank you for using communities Support from Apple. See you soon!
-
Cannot make or receive phone calls after the upgrade to iOS 9.3
Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3
SOLVED
Went into settings,
Cell phone,
Cellular data options,
then change the setting to EnableLTE OFF,
It's for my at & t att, iphone 6 s
No joy for me. I can't make calls, but I can not receive or use call forwarding. So frustrating!
-
my screen is upside down. I hit a few key Strokes and now cannot get right to the top. Help, please
Try holding down CTRL + ALT + one of the arrows to rotate the screen.
-
Cannot make or receive phone calls after the upgrade to iOS 9.2
Last night, I could make and receive phone calls. This morning I upgraded to iOS 9.1 to 9.2, and now I can't make or receive calls.
Any call I make - other iPhones, to landlines, whether on my list of Favorites or not - says 'call X... '. "(where X is the name of the contact - X is omitted if I don't dial a contact). After a few seconds, the phone says "Call ended." and I get three quick tones.
When they call me, it goes to voicemail once they hear 1 or 2 rings. I don't hear anything. The call does not appear in the 'recent' folder, but I received a voice message.
I don't have to "do not disturb" lit.
My iPhone is a 4 s, which can be a key because my wife has a 5. She has just upgraded and has no problem with calls. We are both on the Sprint network, using 'Ting' which is a dealer - so our actual provider's Ting. My phone says "Version 9.2 (13 c 75)", carrier "Sprint 23.0" and model MD377LL/A."
I turned the phone on and off several times, and also to do a reset (now hold both power and home until the apple logo appears). neither helped. I double-clicked the original key and removed the phone application and all other applications, then restarted the phone application, which also helped.
WiFi works.
A related issue is to: IOS 9.2 update .
OK, now it works.
I think that what I had was specific to my carrier - as well as anyone with this problem likely needs to communicate with their provider!
For Ting (Sprint), here's what I had to do:
1. to connect to a Wi - Fi network
2. dial # 873283 #.
3. press the call key
4. press "Start Service Update" and wait a minute or two.
5. press on "Full Service Update" and wait a minute or two for the phone to reconnect to the Sprint network.
6. once the upper line shows that Sprint is connected, I could make and receive phone calls.
Greg
-
I downloaded the update and I can't open the package I need help?
I downloaded the update and cannotopen software package, why? I need help...
You have a desktop Mac Pro 2009 with OSX 10.6.3?
-
I got my windows 10 updated and now can't use one of my products
Can I use one of my products get *.dll errors
Hi James,
This link might be useful: error: 'Missing msvcp110.dll file'
Kind regards
Sheena
-
9.3.5 on my IPhone 6 updated and now I can't get wifi
9.3.5 on my Iphone 6 updated and now can't get wifi?
Hello
Follow the steps here:
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support
Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:
Recommended settings for the WiFi routers and access points - Apple supported
-
I put the security update, and now my browser does not work. I have a white screen which is partly black and I can not close even to uninstall and reinstall. What should I do?
Yes, confirm this answer of philipp is correct for this problem, the problem is the graphics card intel hd3000 with an old driver current, the easy way is to disable hardware acceleration,... to be honest... I think that workaround and lose all the benefits of hardware acceleration.
Thank you
-
- Question
Why can't I minimizes exceeding 2 Notepad in FF? I used to be able to minimize the notebooks as much as I wanted to. When I search on a topic I keep several notebook open until I finished. FF must have made an update and now I can't do that. Is there a setting I can change that will allow me to do it again?
Also at this time, the length of the sentence, I type has changed.
There is no limit for how far she can extend to the right.Help, please. I'm not very irritable and don't understand Computerese.
Please explain in English every day.
Thanks in advance,bouquet
Bouquet,
Great to hear that your problem is finally solved.
Regarding 2nd query you have raised, it is not possible to have the program running if you turn OFF the computer (it's like saying you want the bulb to keep bright despite off). When stop you the machine, you turn off the power... so there is no way that the current state maintained. When start the computer again the next time it starts on new.
But there are 2 options that can help you with your problem: -.
1 SAVE your changes before you close the program, and choose next time when you start the computer
File ->Open (This way your work is preserved and you need not start afresh next time onwards)
2. instead of turning off the computer, choose to Hibernate. When Hibernate you (and NOT CLOSE) the current state is preserved. This means that if you leave the notebook running he will remain in the same State when you next start your computer the next time.
PS: as this forum is for the FF to discuss related issues, I propose that for further assistance e-mail me at my personal mail ID [email protected]' rather than discuss it here on this forum
Now your problem is solved with kindness mark this as closed discussion (marking/choice of appropriate solution helped you)
-
I have updated and now I can't get on the internet
I finished the new update and now I can't get on the internet? How can I fix it?
What happens when you try?
-
I just upgraded my iPad iOS 9.2 and now can't use my Logitech keyboard. What should I do?
I suggest that contact you Logitech to see if they have a update/work around.
Barry
Maybe you are looking for
-
This happens on the bookmarks bar and the bookmark drop down menu. Any suggestions are welcome. Thank you.
-
I don't see the icon of NOR-DAQmx in measurement window in Labview 2013 (student Edition)
Hi all: I installed the driver NOR-DAQmx and Labview 2013 (Student Edition). I connected an acquisition of data NI USB-6008 and tested using NOR-DAQmx and that it works correctly. Now, I tried to make registration of data of this device using the sof
-
Hello! I have create a big program, if I did a Subvi of it. Now, I call this Subvi in one new program... one on the Subvi is a table... so I create an indicator in this terminal off... but when I simulate I don't see anything in my table, no informat
-
I have a Z3 Xperia. Since the upgrade to Android 5.0.2 (Lollipop), I am more able to rearrange home screens. I'm used to be able to do this by long-pressing an empty area of the screen, then long-pressing the screen I want to spend. This no longer wo
-
The Officejet 8500 firmware update
I'm trying to update the firmware on my Officejet 8500 A909g. I downloaded the firmware but the Firmware HP Downloader can't find my printer. I tried two different computers with the same results and I also tried the search on the Downloader button.