iOS9.3 is in place, but the activation service is down

Similar Questions

• I installed windows 7 but the activation code has stopped working.

  I installed windows 7 on 3 laptops but the product key will not work on the third, what should I do?

  If the Windows 7 Home Premium Family Pack upgrade, try the phone activation;

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If it's a single license, then you will need to purchase additional licenses.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  .    INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

• Clean install of Windows 7 but the activation key does not work

  Hello, enter a new installation of Windows 7, the first OS on a new construction of the mine.

  The problem I have is that the activation key will not work, the problem would be
  I use a Windows 7 (updated for Win Vista)? Or do I need a new
  product key?
  Thank you
  Eric

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------

• A line ignored because text, but the case up and down

  It's my data in the example, that comes with the underlying SQL which is run, when I run my report:

  Product

  Date		Value
  01/07/2015	Water	100
  01/07/2015	Cola	58
  01/07/2015	Pepsi	230
  01/07/2015	Pepsi	124

  But the OBI is only 3 of these lines is displayed and one that produced "Pepsi" will be ignored, but one who has "pepsi" is used, including the value. The result displayed in the OBI is:

  Product

  Date		Value
  01/07/2015	Water	100
  01/07/2015	Cola	58
  01/07/2015	Pepsi	230

  I would understand if the value of byproducts could at least be summarized, but it is not...

  SPR at the logical level, I have a fact table and a Dimension of the source/physical even table table. They are joined on the logical level and dimension is created, with levels of content defined for the fact table. Aggregation of the value of the field is set to the sum.

  So, what could be the problem here, why is displayed only the lines with the same text?

  Thank you

  Practice is to alias all THE physical tables and perform joins from there (one physical table means PKs join 1 to 1)... but that doesn't solve your immediate problem (you're stuck with the function-ship to mixed-case text): using drives physical data model design information.  Physically, you should have a size of fact/star (ideally) since this is how you really want to use this data.

• jDeveloper WebService package installed, but the Web Service features are not available in the application wizard

  Hello

  I installed jDeveloper (Studio Edition Version 12.1.3.0.0) and also I installed some packages, for example the Web Service package. But when I create a new application project / I can't select for example of Web Service Client / Proxy and others. See photo:

  

  Do you know why? How can I make available?

  
  THX!

  Milan

  OK, I found it

  I created an application (Custom Java) with the empty project, and then I was able to add the web service client project (right click on the 'project' and select 'of the Gallery"). The same window appears as in my first post, but all features are available

  

  Thank you!

  Milan

• A few years back, I bought CS5. because of my house having to repair my CS5 has been lost in the move. Then I had to take care of my mother who died later of cancer. I have now found my product, but the customer service person said that there is no newspa

  A few years back, I bought CS5. because of my house having to repair my Adobe CS5 has been lost in the move.  Then I had to take care of my mother who died later of cancer.  I have now found my product but the person said the customer service there is no newspaper of me purchase of the product.  I can't use the product that I bought because I don't have the registration code.  So could I please get a refund and I will return the edition teachers and students of CS5.  Thank you.

  @

  Quickly find your serial number

  Download the CS5 products

• My emptiness of my network places, but the networking seems fine

  So, I'm having a bit of a problem that seems to have an impact on all computers on my home network (XP pro x 64 SP2, XP Home SP2, XP Home SP3, XP Pro SP3). Everything worked fine for a year, or while I was at home and then all of a sudden, in recent days, this problem has hit. I can't connect directly to one of the shared folders on my network through my network places. There are more all shared folders showing up there. I try to search the network for shared folders manually by opening the entire network-> Microsoft Windows network (slower than normal here to find my task force, WORKING group)-> WORKING group. Once I try to open my workgroup, he waits a while and then I get the error: "the Working Group is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The list of servers of this working group is not currently available. ". Note that all of my PC of in this working group.
  Internet works fine on all computers, and I can access any shared drives I have been mapped (or enter the path network in Run and open it) and can ping other computers on the network, so I don't think that there is no problem with the network card, and it happens on different computers with different network cards 4 so it is hard to believe that everything has been corrupted somehow. The only thing I can think is that I have automatic updates turned on and maybe MS has released an update that caused this problem.

  Has anyone seen/heard something like that? Any ideas what could be the cause or how to fix this? Measures to try? This isn't a critical issue, as I said I can still access shared folders, just map them or something, it's just frustrating that something that used to work find just stopped, suddenly, with no good reason and everything I can think told still seems to be fine...

  Thanks in advance!

  Thanks for the reply.  I would in fact already found this page through previous research and tried some of the suggestions out there on several of my computers (no luck).  However, the problem is that this page is for lack of network connections and is not really my problem.  My network connections appears fine, it's just the shared network folders that do not appear in "my network places".  I can still access it directly (mapping the path to a file, or enter the path in 'Run'), but I don't have the ability to browse the network more.

  I just wanted to point that the issue seems to have resolved itself, on all computers.  No idea what caused it or what fixed it, but it's that everything works well again.  Thank you Jack for trying to help!

• You are prompted to reactivate Windows after the updates but the activation screen empty.

  Yesterday, after the Windows updates, I was prompted to reactivate Windows in 3 days but activation dropdown was blank.

  This is MGAdiag report.

  Bill

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - H62RJ - GYBCR-WMJGT
  Windows product key hash: VFmeKHHQn3RyKvzwppN6EX + = PLbM
  Windows product ID: 76477-007-5077027-21604
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010300.3.0.hom
  ID: {FF0EF72C-5B92-48A7-BC5D-9CA06A532725} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: registered 1.9.9.0's,
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Standard Edition 2003 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-800a_E2AD56EA-766-191_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {FF0EF72C-5B92-48A7-BC5D-9CA06A532725}1.9.0027.05.1.2600.2.00010300.3.0.homx 32*-*-*-*-WMJGTS-1-5-21-1275210071-1801674531-83952211576477-007-5077027-216045MICRO-STAR INTERNATIONAL CO., LTDMS-7238American Megatrends Inc.. V1.3 20070105000000.000000 + 0000E563C8701846C7A08090409GMT Standard Time(GMT+00:00)03100100Microsoft Office Standard Edition 2003116Ec3jQmb7EXXuT4ag6Ai3ekupaM =70141-745-1390177-562171 1DCE0596ED8FDD2

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  BIOS marker string: 13 22: REAL C & C INC | 16AAE:sharp Corp.,
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Hi Bill,

  ·         The computer starts in safe mode?

  If so, check to see if this article helps you.

  Blank page to activate Windows in the wizard of Windows Product Activation

  Do not respond with results so that we can help you best.

• 'Running' Essbase calculations, but the activity of the CPU is zero

  We are experiencing intermittent problems with essbase calc scripts executing or business rules. EAS will show that "running" a calc, but during the calc Server essbase CPU activity will be reduced to zero. There will be periods of 30 seconds or more when there are 0 activity of the CPU on any of the processors for the esssvr process. Esssvr other processes may continue normally for other applications, but sometimes they are also affected by the same phenomenon at the same time.
  
  64 bit essbase server, V11.1.1.3. Windows 2003 64-bit server. 32 GB of ram, 8CPUs. RAM is only 20% used. Disk space is used only 20 percent. Index is loaded to 100% in the cache. Databases are not fragmented and the problem even after restructuring a force.
  
  It's what is much slower calcs essbase, sometimes twice or three times as slow. Anyone has any ideas on what could cause this problem? In general, we end by stop/start this application or service essbase to solve the problem, but it is not ideal.
  
  Thank you
  Jeff

  Hi HUSKLEY,

  I have a few hours open tomorrow and you want a different set of eyes. Email me and I'll install a goto meeting.

  Kind regards

  John A. Booth
  http://www.metavero.com

• How to install adobe 7? system requires activation but the activation server is disabled for AD7

  Hello

  Is there any solution to use ADOBE 7? I have the boxed version and wanted to install on the new mcomputer that software do activation requre. Activation is disabled for Adobe 7.

  Yes, there is no server activation and you can install is no longer your CD. The current version is 11.

  But there is an alternative. l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• There is no close on each tab, but the active tab.

  I have no x button on each tab, but on the current tab.
  (27, WinXP SP3 FF)
  What I tried: safe mode, Reset o FF.
  browser.tabs.closeButtons is by default "1".
  I want to have x-button on each tab.
  Check out this screenshot http://pichoster.net/images/2014/02/05/FireFox.jpg

  I can still see the close buttons on all tabs with browser.tabs.closeButtons = 1, unless there are several tabs open.

  You can also watch the browser.tabs.tabClipWidth pref (close and restart Firefox after you change this pref).

  • http://KB.mozillazine.org/browser.tabs.tabClipWidth
  • http://KB.mozillazine.org/browser.tabs.closeButtons

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I have Adobe Encore 2.0.  I want to load it on a new computer, but the activation servers have been shut down.

  Is there a work-around that would allow me to still use 2.0 on a new computer?  I still have the installation CD and serial number.

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  NOTE that CS2 will not install on a Mac "modern", and when you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select Windows XP compatibility in the popup of option

• PS3 connected to Windows 7 on laptop with usb ethernet and converter cable. Technician COMPUTER put in place, but the second time I used it it gave me the DNS 80710102 error

  I don't know that it's a quick fix that I'm used to the Macs. Someone please advise

  Hello

  Did recent changes to the computer?

  Follow these steps.

  1 - Open a browser and enter the router's IP address in the navigation bar. For most routers, the default IP address is (192.168.1.1).

  2 - Enter the user name and password to access the router. Press 'OK' and the console application will be displayed in the browser window.

  Tab 3 - Click the "Password". The UPnP settings are located in the same window as the password of the router settings.

  4. Select 'Disable' titled "UPnP" area and click on the Save"" button. Close the console of the router. Start the Playstation machine and connect to the Internet.

  For more information.

  http://community.EU.PlayStation.com/T5/PlayStation-Network-General/unofficial-DNS-error-fix-80710102/TD-p/7903885

  I hope this helps.

• I am trying to reinstall Illustrator but the activation site won't take my product key.

  I'm trying to reinstall Illustrator after restoring my computer.  I bought the digital program when I bought my Dell.  When I enter the product key, I have the message product key already in use.  I don't know if this is a Dell problem or a problem of Adobe.

  Nevermind, I found the problem.

• Is it possible to close all windows but the active one?

  ElCaptain running on a new MacBookPro

  Keyboard shortcut: command + option + W