IP addresses of the network editor VMWare correspond to what is in the Windows network connections

I use VMWare Workstation 10.0.5 build-2443746 in a host Windows 7 x 64. In the VMWare network Editor, I see three cards:

VMnet0 - filled

VMnet1 - host (subnet 192.168.190.0)

VMnet8 - NAT (subnet 192.168.18.0)

When I consider these same cards in Windows in the area of network connections and click on each TCP/IPv4 properties there addresses on different subnets for VMnet1 and VMnet8. I do not understand this, shouldn't the subnets to be identical to what is in the VMWare network Editor?

Advertisement

It is indeed strange. What you can try to do - to find out if this is due to a problem of permission/UAC - is to launch the virtual network editor in the Start Menu "Administrator" to see what happens if you change one of the networks, or click the butoon "Restore Default".

André

Tags: VMware

Similar Questions

  • where can I find the IP address in the window 8

    where can I find the IP address in the window 8

    Press the Windows key + X

    Click prompt (Admin)

    Type: ipconfig

    Press enter

    This will reveal your IP address

    Substitute:

    Do a right-click the network icon in the notification area

    Click Open network and sharing Center

    Under 'display your active networks '.

    Click on Ethernet

    Then click on Details

  • How to change the ip address of the windows host?

    Hello:

    I'll put up an Oracle-32 Bit Linux VM (guest operating system) and Windows 7 (host OS).

    I am unable to ping of windows in Linux, and vice versa.

    My modem has an IP of 192.168. so that my router has the IP 10.10.10.1.

    Host Windows 7

    -


    IP 10.10.10.110

    Linux VMWare reviews

    -


    IP 192.168.59.1

    I tried to change the IP address using "Virtual Network Editor"-> NAT tab and selecting vmnet0 in the drop-down list. Choose 'Yes' to the popup window "you want to enable DHCP on this VMnet? Click on edit to enter an IP address in the same subnet as my router - assign 10.10.10.2, clicked OK to close this window and returns to the main window. However, the OK button is disabled. Then I tried to vmnet8 and vmnet1. I can only a message "click Apply. But there is no button apply.

    No idea what I am doing wrong? I download the latest version of vmware server.

    Appreciate any help,

    Thank you

    Why have not you tried to use a bridged interface?

    ---

    iSCSI SAN software

    http://www.starwindsoftware.com

  • problems to renew the ip address on the windows xp desktop

    I have a dell Windows xp pc.  Internet has always worked well. I have att dsl, my modem is motorola router and cisco/linksys e1000 (crappy system). before I had the 2wire, which worked FINE. in any case, it was an original idea upgrade att I followed the instructions to the letter for the installation. the internet works first via an ethernet connection. then, I installed it on my laptop (wireless) then proceeded to all new via of branch instructions. Once everything was connected wireless connections work fine, but the Office does the same to me 'renew ip' as the other readers. I'm tracking info centres of knowledge re renew ip address, nothing will do. I have mse for safety. I have the cc cleaner that nothing works.  Thanks for all the suggestions.

    Hi kattfenom,

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Why the Windows Vista client gets the IP address of the Windows SBS 2011 as default DNS server?

    I use Windows Vista on a client computer that is connected to our Windows Server SBS 2011 server. I don't want to use the DNS server on the local server and the DNS addresses are automatically collected on our router. Every time I have to restart my computer or disconnect / reconnect the connection to the local network, the default DNS server address is set back to static and has the IP address of the local server, which makes it much slower DNS specifications.

    Can I disable this automatic update of address of DNS server somehow? In fact, I don't want to run a DNS server on the local server.

    Thank you to inform in advance!

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet forums.

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • Iconia W510 hold the Windows to connect does not

    I have a W510 Iconia, I just put in place. I guess that after some windows updates the home screen has changed because now it's asking me to "and hold down Windows button and press the button to connect.» When I turned on the tablet before I could just slide the screen up and present the login screen. I do not have a keyboard with this tablet, and I can't get the sign on screen to display. No matter how I try, by pressing the Windows and then pressing the power button does nothing. Is there a way to get around this?

    Nevermind, I solved this. This is another way to say press ctrl + alt + delete to connect. I had to use the ease of access on the Welcome screen to bring up a keyboard on the screen, and then press ctrl + alt + delete keyboard on the screen to bring up the login screen.

  • Where is the address OF the window in my mail?

    It seems that after I did the last update (10.11.4) I have more a "send FROM" window in my mail.  So that means, I can't choose which email address I use to send an email to someone.

    I really need to fix this - I use some addy for specified purposes and not confuse them!  AND I subscribed to use e-mail with a specific address groups, so a group in need of photos I took cannot bring them up to what this problem is fixed.  They needed to post these pix yesterday!  UGH!

    Any help that you can share will be terrible - thanks in advance!

    When you open a new composition window, the field appear automatically when you have more than one valid SMTP server to send from. Open the preferences of Mail and go to the accounts. Select an account and view the list of SMTP server and make sure you have several available.

  • Log in to the window - Skip connect you and automatically have the beginning of the correct username

    When I start Windows XP, I now get a window with 2 user names and instructions "to begin, click the user name.
    Clicking on a user name takes me on the current desktop
    Clicking on the other one takes me for a desktop very, very old

    I returned home without password to activate one or the other.

    Is it possible to simply ignore this screen and have the correct username just start automatically?

    THX

    Try this:

    "How to turn on automatic logon in Windows XP"
      <>http://support.Microsoft.com/kb/315231 >

    HTH,
    JW

  • How can I stop the windows Messenger Connect automatically

    When I click on messenger sign automatically in.so someone can click it and go to my e-mail.

    CrystalBall © SEZ...

    You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  • Get the IP address of the client from the view

    I have a code that uses the API well established WTSQuerySessionInformation() (http://msdn.microsoft.com/en-us/library/aa383838 (VS.85) .aspx) call, through the argument of WTSClientAddress, to retrieve the IP address of the client that is connected to an RDP session.

    When this code is executed in a View (on XP SP3) session, it still returns 127.0.0.1 rather than the IP address of the client that connects to the session of the view. If I disconnect the session View and reconnect to the same user via a console RDP session and then the IP address of the client is successfully returned. With the help of the WTSClientName argument to return customer name always returns the name of correct client that the session is connected via RDP or the customer to view.

    Anyone got any ideas how to retrieve the IP address of the client please? No doubt must be mailed to a community developer, but I can't find really relevant.

    What is happening because of the tunnel from the view, because only in tunnel mode, the RDP control connects to 127.0.0.1 (on the client side) and the socket connection then integrated on the remote side. Session information are filled with the information provided by the RDP client, where the difference.

    We intend to address this issue in a future version of VMware View by providing various information on the client address environment variables available in the RDP session, including the client's real IP, for example:

    ViewClient_Broker_DNS_Name = broker.foo.com

    ViewClient_Broker_Remote_IP_Address = 1.2.3.4

    ViewClient_Broker_Tunneled = false

    ViewClient_Broker_URL =https://broker.foo.com:443

    ViewClient_IP_Address = 5.6.7.8

    ViewClient_LoggedOn_Domainname = FOO

    ViewClient_LoggedOn_Username = user

    ViewClient_Machine_Domain = bar

    ViewClient_Machine_Name = baz

    ViewClient_MAC_Address=00-12-34-56-BE-EF

    ViewClient_Type = Windows

  • The part of the address of the message writing window TB can cause its own adjustable frame in size as in previous versions of TB?

    In older versions of TB the part of the address of the message entry window had its own adjustable chassis. It was useful that you could develop the image to see all addresses at a time and avoid errors of sending emails to the wrong people, especially when you reply to all and to remove some addresses for example answering users in the company, excluding visitors to learn sensitive information.

    In the recent release you can only see three lines of e-mail addresses and use the scroll bar to see the rest of them, but you may miss the addresses during scrolling up/down. He needs more time to verify that the necessary addresses are there and it is not effective at all.

    Can someone restore the setting of the address in the window of writing? Is there a plan to change this in future versions?

    Please note that I use Thunderbird on Windows XP platform

    Yes! Just below the slider bar formatting changes and you can increase the size of the email address area to see more addresses.

    However, I liked the old style better which was more intuitive. Anyway, there is a way to do the job.

    Thank you very much!

  • Trace the ip address of the client-side database

    Dear all,

    I tried the following technique for the ip address of the client computer connected to my database, but no results sign

    Select the user name, sid, machine, UTL_INADDR.get_host_address (substr (machine, instr(machine,'\') + 1)) ip session $ v where type = 'USER' and username is not null order by machine;
    Select the user name, sid, machine, UTL_INADDR.get_host_address (substr (machine, instr(machine,'\') + 1)) ip session $ v where type = 'USER' and username is not null order by machine
    *
    ERROR on line 1:
    ORA-29257: Unknown host ERP150
    ORA-06512: at "SYS." UTL_INADDR', line 19
    ORA-06512: at "SYS." UTL_INADDR', line 40
    ORA-06512: at line 1

    When I wrote this trigger to draw to connect IP of the user I got the following error when connecting that scott and HR. But it allows me to connect as user sys.

    create or replace trigger
    logon_audit_trigger
    AFTER LOGON ON DATABASE
    BEGIN
    insert into scott.trac_user values (null, sys_context ('userenv', 'ip_address'));
    END;


    Conn scott/[email protected]
    ERROR:
    ORA-00604: an error has occurred at the SQL level 1 recursive
    ORA-01722: invalid number
    ORA-06512: at line 2

    But it allows me to connect as sys users

    Conn sys/[email protected] as sysdba

    When I query the scott.trac_user table

    SQL > select * from scott.trac_user;

    MACHINE IP_ADD
    -------------------------------------------------- ----------



    21 selected lines

    but nothing is displayed... I don't really know what to do.

    Is there a solution to trace the ip address of users...?

    Hello

    You can take a look at

    http://aprakash.WordPress.com/2009/11/06/auditing-IP/

    Anand

  • Smartphones from blackBerry Desktop Manager does not recognize that the "BOLD" is connected

    I loaded the Software Desktop including Desktop Manager v4.7.  When I connect my "BOLD" via the USB port of my PC, the PC recognizes the new hardware and identifies it as a Blackberry Smartphone.  But when I launch Desktop Manager, it does not recognize the "BOLD", and at the bottom left of the window shows "Connected Device (PIN): No."

    Can someone help, please?

    Thank you, but the problem was solved when I used a different USB port on my PC.

  • Where is the Panel of connections?

    I bought a download version of Adobe Dreamweaver CS4 to the OEM Soft store in October 2009 - it installed and ran ok.  I used a lot, but assuming multiple functions of the website, I just gritted my teeth and and use it more frequently.  When I click on file, share my screen... I get this popup.  On the side from Dreamweaver is the Panel containing the local files and remote - I guess it's the connections Panel.  I've been everywhere and impossible to find something that says 'offline option.  In addition, when I click on the window, Extensions, connections I get an another popup that says: "your software has not been activated, and yet I did it more than two years ago.DWPopUp.jpg

    I use PS CS5.

    I finally found a copy of the DW CS4 and window > Extensions > connections is different from CS5.

    Using CS4 I reproduced the error message in your first post when I tried to use share my screen in offline mode.

    Using the DW CS4 connections Panel (window > Extensions > connections), I clicked on the little icon in the upper RIGHT (just below the X) and got the flyout.

    Uncheck the box "Keep me offline" meant I could use then share my screen in CS4 with success.

    Note: you must register a free Adobe ID and password to use share my screen (which is actually an Acrobat.com service).

    If you still get the activation problems mentioned in your first post when you click window > Extensions > connections, then you can be out of luck with CS4.

    Talk to Adobe customer service and confirm with them, if your serial number is valid or pirated.

  • VMware workstation 8 briged connection cannot get an ip address from the dhcp server

    Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

    VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

    FYI - you have posted some of the vmware.log

Maybe you are looking for

  • change map route on mac

    On a road that I want to take, maps on my Mac has proposed three alternatives. One is out of the question. My favorite is one combination of the other two. How can I combine these two routes. ?   I like the fact I can plan the trip on the mac, then s

  • My messages get button disappeared and so did the address book button. Help!

    the messages on the top get button disappeared. I also noticed that the address book button is missing. How can I get that back?

  • REPT with spaces

    Hi all. I'm trying to use the Pages repeat a number a number of times, with a space between each repetition. For example: A, B AND C 1 15 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 6 2 2 2 2 2 2 3 6 3 3 3 3 3 3 4 7 4 4 4 4 4 4 4 5 8 5 5 5 5 5 5 5 5 I managed

  • My 4S said that he will not support Fitbit

    I am trying to load my Fitbit on my iPhone 4S it says I need 8 IOS but my phone says it is fully updated. What can I got my Fitbit and cannot load it.

  • How can I open the pdf files of the site.

    I've recently updated to Firefox version 6.0.1. Now, when I click on an icon of PDF web page, I get a message stating: "Sorry, PdfMeNot is unable to generate a preview of that file." I'm unable to view the pdf file


HashFlare